Coagulation behaviors and in-situ flocs characteristics of composite coagulants in cyanide-containing wastewater: Role of cationic polyelectrolyte

In this paper,composite coagulants(PFS,PFSC05,PFSC1 and PFSC5),prepared by mixing polyferric sulfate(PFS)and cationic polyelectrolyte(CP)coagulants with different weight percent(Wp)of CP(Wp=0%,0.5%,1%and 5%,respectively),were adopted to treat cyanide-containing wastewater.PFSC5 exhibited superior coagulation performances at optimal conditions:the removal of total cyanide(TCN)and chemical oxygen demand(COD)was 95%–97%and 50%–55%,respectively.The effects of CP on the properties and structure of flocs were investigated by laser diffraction instrument and small-angle laser light scattering(SALLS),respectively.The results show that the flocs of PFSC5 have higher growth rate,higher strength factor and lower recovery factor than other flocs.They are also much denser and more uniform owing to the higher fractal dimension(Df)and less microflocs(10–100 m).Furthermore,the dense structure of the PFSC5 flocs can be restored after shear and is more resistant to hydraulic conditions.Particularly,detailed morphology evolution of the flocs was in-situ detected by on-line particle imaging.Due to strong ionic strength in wastewater,the CP in PFSC5 plays a significant role of adsorption,while the main mechanism of CP is electrostatic patch aggregation during the PFSC05 systems.     

Size-Exclusion Chromatography of Asphaltenes: An Experimental Comparison of Commonly Used Approaches

Asphaltenes, the heaviest and most polar fraction of crude oil, are responsible for the clogging of oil pipelines and of underground reservoir rocks. Asphaltenes are defined as a solubility class (toluene- or benzene-soluble, n-alkane insoluble), and a consensus is still lacking on the molar mass (M) averages, distribution, and range of these materials. Size-exclusion chromatography (SEC) is among the most widely employed methods for characterizing the M averages and distributions of both natural and synthetic polymers and, as such, has seen widespread application in the study of asphaltenes. SEC analysis of asphaltenes presents a number of challenges, however, some inherent to all low-M materials and some unique to these particular analytes. Here, we have experimentally compared several of the most commonly used approaches to SEC of asphaltenes, in hope of both demonstrating the influence of experimental conditions upon the results obtained as well as to determine optimal conditions of analysis. In the end, while the former goal was met, the latter one remains an open challenge in the field.     

Study on the “Tin-Ene” reaction of α-bromoacetophenone and metallic tin with aldehydes

β-hydroxy ketones were obtained in good yields by the “tin-ene” reactions of α-bromoacetophenone and metallic tin with aldehydes.     

Practical synthesis of C1–8 fragment of autolytimycin via a chelation-controlled diastereoselective addition of diisopropenylzinc to α-methoxy aldehyde

The C1–8 fragment of autolytimycin was synthesized via a reliable 10-step route capable of delivering 41% overall yield at multi-gram scale. As a key step, a chelation-controlled isopropenylation of α-oxygenated aldehydes was established with a reagent combination of diisopropenylzinc, magnesium halide, and a dichloromethane/toluene mixed solvent. Cram-chelate isopropenylation products dominated for aldehydes with a small α-substituents, such as –OMe and –OBn groups, while the Felkin product could be obtained with a bulky –OTBS group.     

Crosslinked organosiloxane hybrid materials prepared by condensation of silanol and modified silica: Synthesis and characterization

Hybrid materials based on polymethylphenylsiloxane (PMPS) and organic functionalized silica were synthesized via condensation reaction between silanol and alkoxysilyl groups in the presence of quaternary ammonium hydroxide. The structure of prepared materials was investigated by FTIR and NMR, which indicate that the products have incorporated modified silica into the polymer matrix. The prepared hybrid materials show a satisfactory thermal resistance because the initial decomposition of typical product occurred at nearly 100 K higher than that of the pure polymer according to the thermogravimetric analysis (TGA) results. Differential thermogravimetric analysis (DTGA) data confirm that the thermal degradation of prepared hybrid materials comprises of two steps, of which the first one could be controlled by adjusting the content of silica particles and the ratio of surface groups on the particles. The coating films obtained from hybrid products exhibit good thermal mechanical properties. Therefore, the materials are hoped to be used for the application in thermal resistant coating.     

Microfluidic-directed assembly of uniform fluorescent supraballs from CdTe nanocrystals-loaded acrylosilane microemulsion

We report herein a facile approach of fabricating fluorescent supraballs from CdTe nanocrystals (NCs)-loaded acrylosilane microemulsion by a simple microfluidic strategy. Initially, core–shell acrylosilane microemulsion with poly(methylmethacrylate-co-butylacrylate-co-vinyltri(isopropoxy)silane) (poly (MMA-co-BA-co-VPS)) as the core and poly(methylmethacrylate-co-butylacrylate-co-vinyltri(isopropoxy)silane-co-acrylamide) (poly(MMA-co-BA-co-VPS-co-AM)) as the shell were synthesized by differential microemulsion polymerization. Subsequently, CdTe NCs were assembled with these acrylosilane microemulsion particles in the presence of N′-(ethylcarbonimidoyl)-N, N-dimethylpropane-1, 3-diaminemonohydrochloride. Eventually, we fabricated uniformly distributed fluorescent supraballs using the as-prepared CdTe-loaded acrylosilane microemulsion as the discontinuous phase, and methylsilicone oil as the continuous phase by means of a microfluidic device. These fluorescent supraballs display unique colors and favorable fluorescence, which might be useful in optoelectronic applications, such as fluorescent switches, light-emitting diode displays, and illuminations.     

The ring-opening of chiral oxazoline involving pyrrolidone

Chiral N-[1-benzyl-2-hydroxyethyl]-3-[2-oxo-pyrrole]propionamide (C₁₆H₂₂N₂O₃) was obtained unexpectedly from the reaction of oxazoline involving pyrrolidone with copper acetate monohydrate, and the structure was characterized by NMR, IR, elemental analysis, and X-ray analysis.     

Terbinafine hydrochloride intercalated in montmorillonite: synthesis and characterization

The novel antifungal hybrid of terbinafine hydrochloride (TER-HCl)/montmorillonite was synthesized by the intercalation method under mechanical stirring. Intercalation of TER-HCl in the MMT galleries was characterized by X-ray diffraction (XRD), Fourier transform infrared spectra, elemental analysis (EA). and thermogravimetric analysis (TGA). The results from IR, TGA, and EA showed a difference in chemical composition of the MMT and the TER-HCl/MMT. XRD analysis showed that the basal spacing of montmorillonite significantly expanded from 1.53 to 2.79 nm. TER-HCl was successfully intercalated into the interlayer of MMT, and 28 % of TER-HCl was released after 48 h in 0.9 % (w/v) NaCl aqueous solution (pH 7) at 37 ± 0.5 °C. The antifungal activity of the hybrid against Candida albicans was evaluated using the inhibitory zone method and the minimum inhibitory concentration. The TER-HCl/MMT strongly inhibited C. albicans. These results show that TER-HCl/MMT can be useful in biomedical applications.     

Preparation of cellulose I nanowhiskers with a mildly acidic aqueous ionic liquid: reaction efficiency and whiskers attributes

Cellulose I nanowhiskers were prepared in relatively high yield (48 ± 2 %) by single-stage hydrolysis of microcrystalline cellulose with an aqueous solution of 1-butyl-3-methylimidazolium hydrogen sulfate ([Bmim]HSO₄). This reaction occurred under mildly acidic reaction conditions with an [H⁺]/[AGU] ratio of 0.24 mol/mol, i.e., 2 orders of magnitude lower than with concentrated sulfuric acid. The nanowhiskers exhibited small width and width distribution and also smaller length than nanowhiskers obtained with concentrated acid. With a relatively low content of sulfur they also exhibited higher thermal stability than whiskers obtained with concentrated sulfuric acid. The lower solvating power of the aqueous ionic liquid compared to that of concentrated sulfuric acid likely contributes to the greater hydrolysis efficiency in the present system.     

Concise synthesis of aromatic tertiary amines via a double Petasis–borono Mannich reaction of aromatic amines,formaldehyde, and organoboronic acids

A simple and efficient strategy to construct aromatic tertiary amines via a double Petasis–borono Mannich reaction of aromatic amines, formaldehyde, and organoboronic acids has been developed. The transformation provides a useful method for the synthesis of amine derivatives.