混沌光场光子统计分布及二阶相干度的分析与测量

利用通信波段双通道单光子探测器,采用Hanbury Brown-Twiss关联测量方案,理论分析并实验测量了光反馈半导体激光器产生的混沌光场的光子统计分布及不同混沌状态光场的二阶相干度.通过对混沌光场二阶相干度g~((2))(τ)的理论分析,得出随着延迟时间和相干时间的变化,其与相干光、热光及单光子态的二阶相干度可明显区分并呈现出不同分布.同时实验上产生了频谱宽度6.7 GHz的混沌光场,测量了不同光子数分布的结果,并用高斯随机分布、泊松分布、玻色-爱因斯坦分布对光子数分布进行理论拟合,发现随着入射平均光子数的增加,光子数分布从玻色-爱因斯坦分布过渡到泊松分布,但整个过程都与高斯随机分布符合较好,且光场的二阶相干度g~((2))(0)由2降至1.通过改变偏置电流(I=1.0Ith-2.0Ith)和反馈强度(0—10%),实验上研究了混沌光场由低频起伏到相干塌陷的过程中不同状态宏观动力学特性与二阶相干度的对应关系.结果表明:混沌光场在此过程中始终呈现出明显的聚束效应,并在频谱宽度最大时达到最强;同时给出了光子计数测量中聚束效应减弱的物理原因.实验表明该系统及方法能很好地揭示不同状态混沌光场的光子统计特性.     

基于增益光纤长度优化的双波长运转掺铒光纤锁模激光器

构建了可自启动的双波长运转掺铒光纤锁模激光器.通过优化增益光纤长度,利用掺铒光纤在1530nm附近的再吸收效应调节激光器的增益谱,使激光器在1530nm和1560nm附近具有相同的增益强度.实验中采用31cm掺铒光纤作为增益光纤,以透射式半导体可饱和吸收体作为锁模器件,实现了自启动双波长锁模运转.激光器锁模输出重复频率为58.01MHz,信噪比为58.2dB,最高输出功率为4.8mW.锁模输出的光谱在1532.4nm和1552.3nm处具有两个强度接近的谱峰,谱峰间距约为20nm.该激光器无需手动调节即可实现双波长运转,更便于实际使用.     

Strategy of improving the stability and detonation performance for energetic material by introducing the boron atoms

A novel stable energetic compound (E)‐1,2‐diamino‐1,2‐dinitrodiboron (DANB) was theoretically designed based on the structure of 1,1‐diamino‐2,2‐dinitroethene (FOX‐7). Atomization method in combination with Hess' law was used to predict the heat of formation. The detonation velocity (D) and detonation pressure (P) of DANB were approximatively estimated by using Kamlet–Jacobs equations. As a result, DANB has huge heat of formation (2013.5 kJ/mol) and specific enthalpy of combustion (?26.4 kJ/g). Furthermore, DANB possesses high crystal density (1.85 g/cm³) and heat of detonation (5476.0 cal/g), which lead to surprising detonation performance (D = 10.72 km/s, P = 51.9 GPa) that is greater than those of FOX‐7 (D = 8.63 km/s, P = 34.0 GPa) and CL‐20 (D = 9.62 km/s, P = 44.1 GPa). More importantly, DANB is very stable because its bond dissociation energy of the weakest bond (BDE = 357.8 kJ/mol) is larger than those of the most common explosives, such as FOX‐7 (BDE = 200.4 kJ/mol), CL‐20(BDE = 209.2 kJ/mol), HMX(BDE = 165.7 kJ/mol), and RDX (BDE = 161.4 kJ/mol). Therefore, our results show that DANB is a promising candidate for stable and powerful energetic material.     

Yolk–Shell‐Structured Cu/Fe@γ‐Fe2O3 Nanoparticles Loaded Graphitic Porous Carbon for the Oxygen Reduction Reaction

Core–shell Cu/γ‐Fe₂O₃@C and yolk–shell‐structured Cu/Fe@γ‐Fe₂O₃@C particles are prepared by a facile synthesis method using copper oxide as template particles, resorcinol‐formaldehyde as the carbon precursor, and iron nitrate solution as the iron source via pyrolysis. With increasing carbonization temperature and time, solid γ‐Fe₂O₃ cores are formed and then transformed into Fe@γ‐Fe₂O₃ yolk–shell‐structured particles via Ostwald ripening under nitrogen gas flow. The composition variations are studied, and the formation mechanism is proposed for the generation of the hollow and yolk–shell‐structured metal and metal oxides. Moreover, highly graphitic carbons can be obtained by etching the metal and metal oxide nanoparticles through an acid treatment. The electrocatalytic activity for oxygen reduction reaction is investigated on Cu/γ‐Fe₂O₃@C, Cu/Fe@γ‐Fe₂O₃@C, and graphitic carbons, indicating comparable or even superior performance to other Fe‐based nanocatalysts.     

Comparative photoemission study of Bi2(Sr,Ca)3Cu2O8+y and Bi1.7Pb0.3Sr2Ca2Cu3O10+y

The electronic structure of Bi-based 2223 single phase superconductor has been studied by ultraviolet and X-ray photoemission. By comparison with that of 2212 phase superconductor, we find a higher density of states nearE _F for 2223 phase. From analysis of the Cu 2p core-level spectroscopy, we obtain a relatively smaller charge transfer energy between copper and oxygen as well as the Coulomb repulsion energy on Cu site for 2223 phase. We relate these changes to the increase of hole concentration from 2212 to 2223 phase. The experimental results support the viewpoint that the transition temperature should be correlated with the density of states atE _F .     

几种陆用惯性自寻北方案的比较

介绍几种目前广泛应用于军事及民用工业领域的高精度自寻北方案,同时讨论并分析了这些方案的精度和误差补偿方法,提出在兵器领域尤其是在陆用车辆上的适用性等问题。     

Investigations into quantum correlation of coupled qubits in a squeezed vacuum reservoir

In this paper,we investigate the quantum correlation of coupled qubits which are initially in maximally entangled mixed states in a squeezed vacuum reservoir.We compare and analyze the effects of squeezed parameters on quantum discord and quantum concurrence.The results show that in a squeezed vacuum reservoir,the quantum discord and quantum concurrence perform with completely opposite behaviors with the change of squeezed parameters.Quantum discord survives longer with the increase of squeezed amplitude parameter,but entanglement death is faster on the contrary.The results also indicate that the classical correlation of the system is smaller than quantum discord in a vacuum reservoir,while it is bigger than quantum discord in a squeezed vacuum reservoir.The quantum discord and classical correlation are more robust than quantum concurrence in the two reservoir environments,which indicates that the entanglement actually is easily affected by decoherence and quantum discord has a stronger ability to avoid decoherence in a squeezed vacuum reservoir.     

Pigment identification and decoration analysis of a 5th century Chinese lacquer painting screen: a micro‐Raman and FTIR study

To investigate the pigments and decoration applied to a wood‐based lacquer painting screen from the tomb of Si‐ma Jin‐long, Shanxi Province, central China, made by Chinese craftsmen in the 5th century, a combination of micro‐Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), wavelength dispersive X‐ray fluorescence (WDXRF), and microscopic examination was used. The obtained results are as follows: (1) the black, yellow, and red colors are identified as carbon black, orpiment and realgar, and cinnabar, respectively, by using micro‐Raman spectroscopy. The FTIR result shows that the white pigment filled in the leaves is not lead white, as assumed in the literature, but gypsum. Whether lead white was used at other locations remains unanswered and requires more samples for further work; (2) the thickness of each discernable pigment layer, as observed under the microscope, is approximately equal and the differences among them are small, suggesting a superfine painting skill; besides, a noticeable smooth interface between wood and the red grounding substance indicates that a polishing process might have been applied before the painting; (3) the red background was proved to contain cinnabar, but further FTIR analyses found no evidence for the presence of Chinese wood oil; and (4) the most interesting finding, rarely reported before, is that white grains of different sizes are found in both pigment layers and the grounding substance, which are perhaps an intentional addition. Further, in situ XRF and Raman analyses indicate that they are sourced from hydroxyapatite, coming probably from the intentional addition of animal bone ash to the lacquer. But how such a process could be finished and what purpose it served have not yet been answered. Copyright © 2009 John Wiley & Sons, Ltd.     

Mechanism of proton anisotropic velocity distribution in the solar wind

Although it has been long that spacecraft observed the anisotropy of velocity protons in the solar wind, there is still not a reasonable explanation. In this paper we try to give an explanation from the diffusion plateau of protoncyclotron resonance predicted by the quasi-linear theory for the resonance between the protons and the parallel propagating waves. We consider the effect of dispersion relation on diffusion plateau and notice that the diffusion plateau we have got by using cold plasma dispersion relation accords with the density contours in the velocity phase space detected at 0.3 AU in fast solar wind. For explaining proton distributions obtained in the fast solar wind from 0.7 AU to 1 AU hot plasma dispersion relation should be considered. We also give a theoretical relation of proton thermal anisotropy A and plasma parameter β.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.