Synthesis of multiarmed poly(3‐hexyl thiophene) star polymer with microgel core by GRIM and ATRP methods

Regioregular poly(3‐hexyl thiophene) (rr‐P3HT)‐based star polymers were synthesized by a crosslinking reaction of the linear rr‐P3HT macroinitiator and ethylene glycol dimethacrylate (EGDMA) crosslinker through Ru‐based atom transfer radical polymerization (ATRP), where the rr‐P3HT macroinitiator was prepared by Grignard metathesis method (GRIM) followed by end functionalization of the ATRP initiator with chlorophenylacetate (CPA) to the rr‐P3HT. Relatively high molecular weight of the star polymers were obtained (M_p = 8,988,000 g/mol), which consisted of large numbers of the rr‐P3HT arm chains radiating from the EGDMA‐based microgel core. The yield of the star polymers were strongly affected by the added amount of the EGDMA crosslinker. The crystalline structure of the rr‐P3HT by intermolecular π‐π stacking interaction gradually decreased as the star polymer formed, which was confirmed by differential scanning calorimeter (DSC), atomic force microscopy (AFM), and electro‐optical analyses. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Single electron transfer‐living radical polymerization of methyl methacrylate catalyzed by ytterbium powder

Zerovalent ytterbium (Yb) powder is firstly used as a catalyst in single electron transfer‐living radical polymerization of methyl methacrylate initiated by carbon tetrachloride in N, N‐dimethylformamide (DMF) and dimethyl sulfoxide, respectively. Polymerization proceeds in a “living”/controlled way as evidenced by kinetic studies and chain extension results, producing well‐defined polymers with controlled degree of polymerization and narrow molecular weight distribution. The apparent activation energy of polymerization in DMF is accounted to be 36.2 kJ/mol, and the energy of equilibrium state is calculated to be 13.9 kJ/mol. An increase in the concentration of Yb(0) yields a higher monomer conversion. It is observed that polymerization rate experiments a rapid increase in the presence of more polar solvent water, and increasing in the content of H₂O results in an increase in the apparent rate constant of polymerization, and a decrease in the molecular weight distribution. The reaction rate and molecular weight increase along with the decrease of DMF content. The effect of Yb(0) powder content, different ligands and concentration of initiator on the polymerization is also investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

High speeds complementary integrated circuits fabricated with all‐printed polymeric semiconductors

Inkjet‐printed high speed polymeric complementary circuits are fabricated using an n‐type ([poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐dithiophene)} [P(NDI2OD‐T2), Polyera ActivInk N2200] and two p‐type polymers [poly(3‐hexylthiophene) (P3HT) and a dithiophene‐based polymer (Polyera ActivInk P2100)]. The top‐gate/bottom‐contact (TG/BC) organic field‐effect transistors (OFETs) exhibit well‐balanced and very‐high hole and electron mobilities (μ_FET) of 0.2–0.5 cm²/Vs, which were enabled by optimization of the inkjet‐printed active features, small contact resistance both of electron and hole injections, and effective control over gate dielectrics and its orthogonal solvent effect (selection of poly(methyl methacrylate) and 2‐ethoxyethanol). Our first demonstrated inkjet‐printed polymeric complementary devices have been integrated to high‐performance complementary inverters (gain >30) and ring oscillators (oscillation frequency ～50 kHz). We believe that the operating frequency of printable organic circuits can be further improved more than 10 MHz by fine‐tuning of the device architecture and optimization of the p‐ and n‐channel semiconductor processing. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

The application of Py-GC/MS for the catalytic upgrading of oil separated from summer food waste leachate

The catalytic cracking of oil fractions separated from summer food waste leachate was investigated over BEA zeolite and Al-SBA-15 catalysts. In this study, a mixture of food waste oil fractions and catalyst was directly introduced to pyrolysis gas chromatography/mass spectrometry (Py-GC/MS), with the resulting vapor phase products being simultaneously analyzed. Various acid compounds, including oleic acid, produced by the non-catalytic pyrolysis of food waste leachate were reformed into valuable compounds, such as oxygenates, hydrocarbons, and aromatics. The BEA zeolite catalyst showed higher selectivity for hydrocarbon compounds, especially aromatics, within the gasoline range due to its superior cracking ability originating from its highly acidic sites. Conversely, the cracking performance of the Al-SBA-15 catalyst, possessing mild acidic sites, was lower than that of the BEA zeolite. Increasing the amount of Al-SBA-15 catalyst enhanced the cracking activity and resulted in higher selectivity for hydrocarbons.     

Classification and determination of total protein in milk powder using near infrared reflectance spectrometry and the successive projections algorithm for variable selection

This paper proposes a methodology for the classification and determination of total protein in milk powder using near infrared reflectance spectrometry (NIRS) and variable selection. Two brands of milk powder were acquired from three Brazilian cities (Natal-RN, Salvador-BA and Rio de Janeiro-RJ). The protein content of 38 samples was determined by the Kjeldahl method and NIRS analysis. Principal component regression (PCR) and partial least squares (PLS) multivariate calibrations were used to predict the total protein. Soft independent modeling of class analogy (SIMCA) was also used for full-spectrum classification, resulting in almost 100% classification accuracy, regardless of the significance level adopted for the F-test. Using this strategy, it was feasible to classify powder milk rapidly and nondestructively without the need for various analytical determinations. Concerning the multivariate calibration models, the results show that PCR, PLS and MLR-SPA models are good for predicting total protein in powder milk; the respective root mean square errors of prediction (RMSEP) were 0.28 (PCR), 0.25 (PLS), 0.11 wt% (MLR-SPA) with an average sample protein content of 8.1 wt%. The results obtained in this investigation suggest that the proposed methodology is a promising alternative for the determination of total protein in milk powder.     

TFA-catalyzed C–N bond activation of enamides with indoles: efficient synthesis of 3,3-bisindolylpropanoates and other bisindolylalkanes

An efficient TFA-catalyzed cleavage of C–N bonds in alkylation of indoles by tertiary enamides was described. A variety of bisindolylalkane derivatives, especially 3,3-bisindolylpropanoates, were expeditiously synthesized in good yields.     

Asymptotics of variance of the lattice point count

The variance of the number of lattice points inside the dilated bounded set rD with random position in ℝ ^d has asymptotics ∼ r ^d−1 if the rotational average of the squared modulus of the Fourier transform of the set is O(ϰ ^−d−1). The asymptotics follow from Wiener’s Tauberian theorem.