Mössbauer and X-ray diffraction characterization of Fe60Al40 coatings prepared by thermal spraying

Microstructured (atomized) and nanostructured (milled) Fe₆₀Al₄₀ powders together with their corresponding coatings synthesized by High Velocity Oxy-fuel (HVOF) or Atmospheric Plasma Spray (APS) thermal spraying techniques have been characterized by Mössbauer Spectroscopy (MS) and X-ray Diffraction (XRD). The evolution of the microstructure and the atomic ordering degree in the powders and coatings are discussed at the light of the various processing conditions. The operational correlation between the parameters of the duplex morphology of coatings and the processing parameters is discussed.     

A Simple Bi-directional Mode Expansion Propagation Algorithm Based on Modes of a Parallel-plate Waveguide

The bi-directional mode expansion propagation algorithm (BEP) is known to be an accurate and efficient method for modelling field distribution in high-index contrast waveguide structures with strong back-reflections like Bragg gratings and photonic crystals. The main difficulty of this method is that for lossy structures, the propagation constants of modes are to be searched in the complex plane. To speed-up this procedure, a two-step algorithm for eigenmode calculation based on the expansion into the modes of an empty metallic waveguide has recently been proposed. Proper truncation rules possessing good convergence of the expansion method for both TE and TM modes have also been recently published. In this contribution, both these approaches are combined in the development of an extremely simple version of the two-dimensional BEP method that makes use of the field expansion into the eigenmodes of a parallel-plate waveguide. The method is strictly reciprocal and appeared to be computationally reliable also for strongly lossy structures. High numerical stability is ensured using the scattering matrix formalism, and an efficient method of calculating Bloch modes for symmetric as well as asymmetric periodic waveguide structures is adopted. A wide range of applicability of the method is demonstrated by a few examples.     

Synchronization of Genesio chaotic system via backstepping approach

Backstepping design is proposed for synchronization of Genesio chaotic system. Firstly, the control problem for the chaos synchronization of nominal Genesio systems without unknown parameters is considered. Next, an adaptive backstepping control law is derived to make the error signals between drive Genesio system and response Genesio system with an uncertain parameter asymptotically synchronized. Finally, the approach is extended to the synchronization problem for the system with three unknown parameters. The stability analysis in this article is proved by using a well-known Lyapunov stability theorem. Note that the approach provided here needs only a single controller to realize the synchronization. Two numerical simulations are presented to show the effectiveness of the proposed chaos synchronization scheme.     

In situ observations of domain wall motion in Mn–Zn and Ni–Zn ferrites by Lorentz microscopy and electron holography

Domain wall motion in Mn–Zn and Ni–Zn ferrites with applied magnetic fields is investigated by in situ observations with Lorentz microscopy and electron holography. It is found that both Mn–Zn and Ni–Zn ferrites have a mean grain size of approximately 10 μm and several pores with sizes ranging from 0.2 to 1.1 μm. In situ observations by Lorentz microscopy with an applied magnetic field reveals that in Mn–Zn ferrite, the domain walls move easily across the grain boundary, while in Ni–Zn ferrite, the domain walls move along the grain boundary but are pinned at the grain boundary and pores. From in situ observations of Ni–Zn ferrite by electron holography, it is clarified that domain wall pinning at the grain boundary retards a sensitive increase in magnetic flux parallel to the applied field direction, which is considered to result in high hysteresis loss.     

Analysis of the manufacturing lead time in a production system with non-renewal batch input,threshold policy and post-operation

In this paper, we analyze the manufacturing lead time in a production system with BMAP (Batch Markovian Arrival process) input and post-operation operated under the N-policy. We use the factorization principle to derive the waiting time distribution (hence the manufacturing lead time) and the mean performance measures. A numerical example is provided.     

Representation surfaces of Young''s modulus and Poisson''s ratio for BCC transition metals

 The general expressions for the compliance , Young's modulus E(h k l) and Poisson's ratio υ(h k l) along an arbitrary direction [h k l] are given for cubic crystals. The representation surfaces, for which the length of the radius vector in the [h k l] direction equals to E(h k l) or υ(h k l), are constructed for seven BCC transition metals Cr, Fe, Mo, Nb, Ta, V and W. Neglecting W, which is isotropic, both representation surfaces of Young's modulus and Poisson's ratio are spherical surfaces. The remaining BCC transition metals may be grouped into two classes. In the first group (Cr, Mo, Nb and V) with negative values of s_A, Young's modulus surface has eight depressed corners and six rounded protuberances at the centers of the faces. In the second group (Fe and Ta) with positive values of s_A, on the contrary, Young's modulus surface has eight rounded protuberance corners and six depressions at the centers of the faces. The contrary conclusions are obtained for Poisson's ratio.     

Synthesis and electrical characteristics of polyaniline nanoparticles and their polymeric composite

Monodisperse polyaniline nanoparticles (PAPSSA) were synthesized from an oxidative dispersion polymerization using poly(sodium 4-styrenesulfonate) (PSSA) as both a polymeric stabilizer and a dopant agent due to its acidity. The nanoparticles were being stabilized with two different molecular weight of PSSA. Size effect of PAPSSA particles were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and dynamic light scattering (DLS). The d.c. electrical conductivity of composite films on the glass substrate was measured by a four-probe method. It was found that the electrical properties of the composite films are affected by the content of nano-sized polyaniline and different molecular weights of stabilizer in the poly(vinyl alcohol) (PVA) matrix.     

Ab-initio molecular dynamics simulation on nano-system under external pressure

A new constant-pressure molecular dynamics (MD) method is developed to simulate the dynamic behavior and structure transition of finite system under external pressure. In this method, no artificial parameter is introduced and the computation overheads are very small. As an application, a hard-soft transition of single wall carbon nanotube (SWCNT) under external pressure is found, which is in agreement with the experiments.