Amperometric flow-injection analysis of hydrazine by electrocatalytic oxidation at cobalt tetraphenylporphyrin modified electrode with heat treatment

Chemically modified electrodes prepared by treating the cobalt tetraphenylporphyrin modified glassy-carbon electrode at 750 degrees (HCME) are shown to catalyze the electrooxidation of hydrazine. The oxidation occurred at +0.63 V vs. Ag/AgCl (saturated potassium chloride) in pH 2.5 media. The catalytic response is evaluated with respect to solution pH, potential scan-rate, concentration dependence and flow-rate. The catalytic stability of the HCME is compared with that of the cobalt tetraphenylporphyrin adsorbed glassy-carbon electrode. The stability of the HCME was excellent in acidic solution and even in solutions containing organic solvent (50% CH(3)OH). When used as the sensing electrode in amperometric detection in flow-injection analysis, the HCME permitted sensitive detection of hydrazine at 0.5 V. The limit of detection was 0.1 ng. The linear range was from 50 ng to 2.4 mug. The method is very sensitive and selective.     

Chiral Salen Manganese Complex Immobilized on SBA-15： A New Heterogenized Enantioselective Catalyst for the Epoxidation of Alkenes

Jacobsen‘s catalyst was immobilized onto SBA-15 by multi-step grafting, and this heterogenized catalyst exhibited comparable catalytic performance with the corresponding homogeneous counterpart for the epoxidation of alkenes, and the catalyst could be recycled effectively several times.     

付里叶变换红外光谱仪的操作参数对光谱的影响

本文以二苯基甲酮的ＫＢｒ压片为标样，在Ｂｒｕｋｅｒ ＩＦＳ １２０ＨＲ付里叶变换红外光谱仪上系统考察了该仪器折一些重要操作参数（光源光栏、切趾函数、扫描速度）对光谱质量（信噪比，分辨率）的影响。从而获得了测样时的优化操作条件。     

A Novel Green Preparation of a, a''''-Bis (substituted benzylidene)-cycloalkanones Promoted by FeCl_3 6H-2O in Ionic Liquid

a, a'-Bis(substituted benzylidene)cycloalkanones were efficiently prepared from cycloalkanones and benzaldehydes in [bmim][BF4] by using iron(III) chloride hexahydrate as a catalyst. It is shown that [bmim][BF4] and iron(III) chloride hexahydrate can be quantitatively recovered and be reused effectively for many times. Compared with the known methods, this novel process has the advantage of being an envkonmentally benign process together with good yields and mild reaction conditions.     

稀土复合型柴油催化助燃剂的研制及应用

采用铈、铂的有机配合物及碳酸酯制备出一种稀土复合型柴油催化助燃剂.通过发动机台架试验,表明添加剂可有效降低碳烟PM和NOz排放,并且发动机热效率有所提高.     

罗丹明B-Mo(V)-SCN~--PVA体系荧光熄灭法测痕量钼

在聚乙烯醇存在下,用罗丹明B-Mo(V)-SCN~-荧光熄灭法测Mo,能消除过量的SCN-对罗丹明B的熄灭作用。加入聚乙烯醇后体系的荧光熄灭倍数比未加入时大14倍。此法灵敏度高、稳定性好、操作简便,检测下限0.12ng/ml Mo.可用于测水和头发中的钼。     

1β—Methyl Carbapenem中间体的合成

综述了１β－Ｍｅｔｈｙｌ Ｃａｒｂａｐｅｎｅｍ中间体的合成方法，重点强调了如何构筑１位β构型的甲基。参考文献３７篇。     

α-环糊精对铜-[meso-四(4-甲氧基-3-磺酸基苯)卟啉]显色反应增敏作用的研究

本文研究了α-环糊精存在下,铜与meso-四(4-甲氧基-3-磺酸基苯)卟啉显色反应的条件,其最大吸收在417nm处,摩尔吸光系数为2.5×10~5L·mol~(-1)·cm~(-1)铜含量在0～2μg/10.75ml内符合比尔定律,并利用此法测定了果树叶和头发中的铜。     

滂胺天蓝-氨基糖苷类抗生素的显色反应及其分析应用

在 pH2.0～7.0的条件下 ,滂胺天蓝(PSB)与硫酸卡那霉素(KANA)、硫酸庆大霉素(GEN)和硫酸新霉素(NEO)等氨基糖苷类抗生素反应生成蓝色离子缔合物 ,最大显色波长位于686～690nm ,线性范围分别为0～14.0、0～12.5、0～14.0mg/L ,摩尔吸光系数(ε)分别为1.53×104、1.12×104、1.47×104L/(mol·cm) ;最大褪色波长位于620～622nm ,线性范围分别为0～14.0、0～12.0、0～14.0mg/L ,摩尔吸光系数(ε)分别为1.41×104、1.43×104、2.42×104L/(mol·cm) ;当用双波长叠加法测定时 ,ε值分别为2.94×104、2.55×104、3.89×104L/(mol·cm) ;探讨了适宜的反应条件 ;该法用于市售药物中氨基糖苷类抗生素含量的测定 ,结果令人满意     

Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.