新型螺环单体的合成和自由基聚合反应的研究

新型螺环单体的合成和自由基聚合反应的研究王宏鲁剑涛冯品珍（中国科学技术大学研究生院化学部北京１０００３９）关键词自由基聚合，新单体合成，螺环单体，自由基共聚虽然离子型开环聚合早已为人熟知，但是自由基开环聚合反应的研究和应用开发还刚刚起步．...     

Biosorption of copper(II) and zinc(II) from aqueous solution by Pseudomonas putida CZ1

To study Pseudomonas putida CZ1, having high tolerance to copper and zinc on the removal of toxic metals from aqueous solutions, the biosorption of Cu(II) and Zn(II) by living and nonliving P. putida CZ1 were studied as functions of reaction time, initial pH of the solution and metal concentration. It was found that the optimum pH for Zn(II) removal by living and nonliving cells was 5.0, while it was 5.0 and 4.5, respectively, for Cu(II) removal. At the optimal conditions, metal ion biosorption was increased as the initial metal concentration increased. The adsorption data with respect to both metals provide an excellent fit to the Langmuir isotherm. The binding capacity of living cells is significantly higher than that of nonliving cells at tested conditions. It demonstrated that about 40-50% of the metals were actively taken up by P. putida CZ1, with the remainder being passively bound to the bacterium. Moreover, desorption efficiency of Cu(II) and Zn(II) by living cells was 72.5 and 45.6% under 0.1M HCl and it was 95.3 and 83.8% by nonliving cells, respectively. It may be due to Cu(II) and Zn(II) uptake by the living cells enhanced by intracellular accumulation.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

Determination of Levofloxacin in Human Urine with Capillary Electrophoresis and Fluorescence Detector

In this study, we developed an analytical method for the enantioseparation of ofloxacin, using capillary electrophoresis with fluorescence detection. The optimum background electrolyte was obtained to be 60 mM hydroxylpropyl‐β‐cyclodextrin (HP‐β‐CD) in 50 mM phosphate buffer at pH 2.30. Under these conditions, the (+) and (‐) ofloxacin were completely separated, with the detection limit of 10 nM when the sample was prepared in deionized water. The linear ranges of levofloxacin in deionized water and untreated urine were 10^?7 to 5 × 10^?3 M with R² = 0.9989 and 5 × 10^?6to 5 × 10^?3 M with R² = 0.9943, respectively. We also applied this method to investigate the purity of a commercial drug. The results revealed that the ratio between (+)‐ofloxacin and (‐)‐ofloxacin (levofloxacin) was 99.9:0.1, and there is about 93 mg levofloxacin per tablet (200 mg). The concentration of levofloxacin in patient's urine was founded to be 7.9 × 10^?4M, and the ratio between the two optical isomers was 99.3:0.7.     

Dispersion of silica nano-particles in sol-gel hybrid resins for fabrication of multi-scale hybrid nanocomposite

Multi-scale hybrid nanocomposites containing both ∼15 nm silica colloids and ∼2 nm oligosiloxanes in a methacryl polymer matrix were newly designed and fabricated. Colloidal silica sols were dispersed in methacryl oligosiloxanes nano-hybrid resins synthesized by sol-gel reaction of methacryloxypropylmethoxysilane and diphenylsilanediol. On the basis of TEM and SANS analyses, it was confirmed that the silica colloids were compatibly dispersed and different sizes of colloidal silica and oligosiloxanes co-exist in the solutions. Multi-scale hybrid nanocomposites fabricated by UV and thermal curing with incorporation of silica colloids in the nano-hybrid materials show enhanced mechanical and thermal characteristics.     

Helicity‐Encoded Molecular Strands: Efficient Access by the Hydrazone Route and Structural Features

Control over the folding of molecular strands may be achieved by appropriate choice of the constituting subunits, in particular for chains of specific heterocycles such as sequences of directly connected pyridine (py) and pyrimidine (pym) rings, which are known to fold into extended helical structures. Since the hydrazone (hyz) group represents an isomorphic analogue of a py site, the condensation of hydrazine and carboxaldehyde derivatives of pym offers a very efficient approach to strands incorporating hyz instead of py units and constituted by sequences of alternating hyz and pym groups. A series of such strands of different lengths, up to ten hyz units, i.e., 1 – 7 , were synthesized. Their spectral properties indicate that they fold indeed into helical shapes. Extensive characterization was performed in solution by ¹HNMR spectroscopy and in the solid state by determination of the crystal structures of eight such strands. They all display the expected helical geometry with up to 3 ¹/₃ turns and direct stacking contacts. The efficiency and flexibility of the synthetic approach as well as its wide potential for generation of diversity through lateral decoration make the (hyz? pym) subunit a particularly attractive helicity codon.     

水相中乙醇对胶体泡沫性质的影响

用不同比例的水-乙醇混合物作水相制备了胶体泡沫（CLA）,实验观察并测定了CLA的形态、粒径分布、半衰期、Zeta电位、水相溶液的粘度和水相/油相之间的界面张力等性质.结果表明，水相中加入乙醇会影响CLA的稳定性和粒径大小,但对CLA的Zeta电位影响不大.乙醇对CLA稳定性的影响主要是由于乙醇分子嵌入到界面膜中导致膜的强度变化以及水相粘度发生变化导致CLA粒子间隙的排液过程发生变化.     

Preparation ,Structural Characterization and Luminescent Property of Binucleasr Silver（Ⅰ）Complex Formed by Benzotriazole and 1—Hydroxymethyl Benzotriazole

Dinuclear silver (I) six‐membered ring complex [Ag₂ (bta)₂ ‐(hmbta)₂] (ClO₄)₂ (3) has been synthesized by the reaction of benzotriazole (bta) (1) and 1‐hydroxymethyl benzotriazole (hmbta) (2) with Ag (CH₃CN)₄ClO₄. The structures of compound 2 and Complex 3 have been studied by single crystal X‐ray diffraction analysis. The change of luminescent intensity of 1, 2 and 3 was reported. Compound 2 crystallizes in the monoclinic system with space group P2 (1)/c, a = 0.7655 (10) nm, b = 1.0126 (14) nm, c =0.9502 (13) nm, β = 95.07 (2)°, V = 0.7337 (17) nm³ and Z = 4. Complex 3 crystallizes in the triclinic system with space group P1, a = 0.73611 (18) nm, b = 0.9152 (2) nm, c = 1.2277 (3) nm, β = 87.170 (5)°, V = 0.8221 (3) nm³ and Z = 1. The main structural feature of complex 3 is a symmetric dinuclear six‐membered ring formed by two silver (I) atoms and four N‐atoms from two benzotriazoles. The second structural feature of complex 3 is the τ‐τ stacking interaction between two adjacent molecular planes, which forms the two‐dimentional layer structure. Besides, compared with 2, the luminescent intensity of complex 3 shows a remarkable enhancement.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Cell detection based on protein array using modified glass slides

A protein array for cell detection was fabricated by spotting different antibodies on modified glass slides. Glass slides were modified to allow antibodies to be immobilized on it and to selectively bind antigens. Antibodies were specially selected with the cells to be detected as targets, which permitted target cells in samples to bind specifically to the array with little nonspecific binding. Results can be obtained by directly putting the samples onto the array for 1 h or a little longer to let the cells specifically interact with the antibodies. After washing the unbound samples away, images were observed with a microscope and captured with a CCD camera. The assessment of antibody-cell binding was evaluated by capturing red blood cells (RBCs) in human blood with blood group antibodies (anti-A and anti-B). Blood group antibodies were spotted on the modified glass slide and kept at 4<.deg> degrees C overnight for immobilization. Human blood samples diluted to different concentrations were used to examine the sensitivity and specificity of the method.