A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Aluminum(III) complexes containing O,O chelating ligand

The stoichiometric reactions of trimethylaluminum with 2,6‐(MeOCH₂)₂C₆H₃OH (LH) revealed compounds L₃Al ( 1 ) and L₂AlMe ( 2 ). On the other hand reaction of 1 equiv. of LH with trimethylaluminum did not lead to the formation of complex LAlMe₂ ( 3 ), rather 2 together with Me₃Al were observed as a result of a disproportionation of 3 . Compounds 1 and 2 were characterized by elemental analysis, ¹H and ¹³C NMR spectroscopy and in the case of 1 by X‐ray diffraction. Derivative 2 underwent transmetalation with Ph₃SnOH, giving LSnPh₃ ( 4 ) as the result of a migration of ligand L from the aluminum to the tin atom. The identity of 4 was established by elemental analysis, ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy and ¹H, ¹¹⁹Sn HMBC experiments. The system 2 and B(C₆F₅)₃ in a 1:1 molar ratio was shown to be active in the polymerization of propylene oxide and ε‐caprolactone. Copyright © 2007 John Wiley & Sons, Ltd.     

800nm激光泵浦掺Nd^3＋的氟化物玻璃光纤正向双程超荧光分析

从实验上探讨了掺Ｎｄ＾３＋的氟化物玻璃光纤正向双程超荧光基本特性，包括输入－输出特性、输出－带宽特性以及输出－波长（激发）特性。并给出了理论上的拟合公式，实验表明利用氟化物玻璃光纤有望获得性能优异的有应用前景的低相干度集成化光源。     

Chlorokomplexe von Cu2+ und Ni2+ in Dimethylformamid

Zusammenfassung Durch spektrophotometrische Messungen in Dimethylformamid (DMF) werden die Koordinationsformen [CuCl]⁺ und [CuCl₃]^– sowie [NiCl]⁺, [NiCl₃]^– und [NiCl₄]^2– nachgewiesen. Bei Nickel(II)-chlorid und Kupfer(II)-chlorid wird Autokomplexbildung diskutiert. Die Solvate [Cu(DMF)₄] (ClO₄)₂ und [Ni(DMF)₆] (ClO₄)₂ werden isoliert.Im Zuge der Untersuchungen über Chlorokomplexe von Ionen der Übergangsmetalle^{1, 2} in nichtwäßrigen Lösungsmitteln wurden die Spektren der Lösungen von Kupfer(II)- und Nikkel(II)-perchlorat inDMF in Gegenwart verschiedener Mengen Tetraäthylammoniumchlorid aufgenommen.Mit 5 Abbildungen     

Comparative analysis of (p,d), (d,t) and (3He, α) reactions on13C nucleus

The angular distributions of the (p, d), (d, t) and(³He, ) reactions on¹³C have been analysed within the framework of DWBA in which additional information on nuclear vertex constants was introduced. Although all these reactions seem to be similar single nucleon transfer, their mechanism is shown to be quite different and so is the information extracted thereof. While from the (p, d) reactions spectroscopic factors may be extracted unambiguously, from the (d, t) reactions it is possible to obtain directly the values of vertex constants only, which in turn are consistent with those determined by extrapolation of the experimental cross sections of the (p, d) reactions to the pole.In the case of (³He, ) reactions, however, the analysis indicates inadequacy of the DWBA concerning the calculations of central partial amplitudes. For a more reliable extraction of structural information, besides the correct normalization of peripheral amplitudes, a contribution of more complex mechanisms must be taken into account.     

Dependence of the S-matrix on the choice of field variables in the effective Lagrangian

The dependence of the on-shellS-matrix on the change of the Lagrangian induced by a nonlinear substitutionF() is investigated by means of a graphical analysis. A cancellation mechanism is found and used to show that the tree approximation of theS-matrix is independent of such a substitution and that the Jacobian of the substitution has to be introduced in order to cancel a new class of singular one-loop graphs and to recover the primaryS-matrix at the one-loop level.     

Cartesian currents,weak diffeomorphisms and existence theorems in nonlinear elasticity

Summary In this paper we introduce some new classes of functions, among these a class of weak diffeomorphisms. In these classes we prove by direct methods the existence of minimizers for several kinds of variational integrals. In particular, we prove the existence of one-to-one orientation-preserving maps that minimize suitable energies associated with hyperelastic materials. The minimizers are also proved to satisfy equilibrium equations. Finally radial deformations are discussed in connection with cavitation.     

Linear mode conversion of waves near the maxima or minima of the density in a warm magnetized plasma

Behaviour of the h. f. electrostatic waves near the plasma or upper hybrid resonances was studied in the case that these resonances are situated at the maxima or minima of the plasma density. Supposing the parabolic density profile in these regions we obtained the connection formulae for the WKB solutions. In a weakly inhomogeneous magnetoplasma the effect of the parabolic profile manifests itself only in narrow frequency band centred at the resonance frequency corresponding to the extreme value of the density. The whole process can be then described by only two coefficients, viz. the power conversion and power transmission coefficients.