芥子气中毒人员尿液标记物谱分析及其临床诊断应用

该研究基于暴露生物标记物溯源思路,应用于解决芥子气(SM)临床早期诊断、溯源确证难题.建立了芥子气中毒患者尿液中7 种游离代谢产物的两步固相萃取/超高效液相色谱-串联质谱(SPE/UPLC-MS/MS)同时定量方法,检出限为5 pg/mL～1 ng/mL,定量下限为10 pg/mL～5 ng/mL;结合前期建立的4 种...     

带-NH2的嘧啶环对钌配合物与DNA相互作用的瞬态发光特性的影响

采用时间分辨的发光光谱技术,分别测量了两种新合成的钌配合物[Ru(bpy)2 (dpbpd(NH2)2)]2 和[Ru(phen)2(dpbpd(NH2)2)]2 与小牛胸腺脱氧核糖核酸(ctDNA)相互作用时的瞬态发光动力学过程,并与以往对[Ru(phen)2dppz]2 等的研究结果进行对比,从而研究带-NH2的嘧啶环对配合物与DNA作用动力学过程的影响.结果表明:这两种含有带-NH2的嘧啶环的钌配合物与DNA相互作用时的发光按双指数规律衰减,发光寿命为几十纳秒,比dppz类钌配合物与DNA作用时的发光衰变寿命(几百纳秒)小一个数量级.归因于嘧啶环上的N和-NH2可能与水分子、DNA的碱基对或磷酸骨架形成氢键,从而加快激发态的无辐射弛豫,削弱发射光强,缩短发光寿命.该结论为进一步研究配合物分子与DNA的相互作用的机理提供了一定的依据.     

An FEM approximation for a fourth-order variational inequality of second kind

A fourth-order variational inequality of the second kind arising in a plate frictional bending problem is considered. By using regularization method, the original problem can be formulated as a differentiable variational equation, and the corresponding discrete FEM variational equation is presented afterwards. Abstract error estimates and error estimates of the approximation are derived in terms of energy norm and L^2-norm.     

Application of Two Novel Acoustic Emission Parameters on Identifying the Instability of Granite

The issue of monitoring and early warning of rock instability has received increasing critical attention in the study of rock engineering. To investigate the damage evolution process of granite under triaxial compression tests, acoustic emission (AE) tests were performed simultaneously. This study firstly introduced two novel parameters, i.e., the coefficient of variation (CoV) of the information entropy and correlation dimension of the amplitude data from the AE tests, to identify the precursor of the failure of granite. Then the relationship between the changes in these parameters and the stress-time curve was compared and analyzed. The results of this study show that: (1) There is a strong correlation between the CoV of the information entropy and the failure process of granite. The granite failed when the CoV curve raised to a plateau, which could be used as an indicator of rock instability. (2) The fluctuation of the correlation dimension indicates the different stages during the loading process, i.e., the initial compaction stage, the linear elastic stage, the yield stage, and the failure stage. Each stage contains a descending and a rising process in the correlation dimension curve, and the exhibited starting point or the bottom point at the correlation dimension curve could be selected as the indicator point for the rock instability. (3) The combined analysis of the Information entropy and Correlation dimension can improve the accuracy of rock instability prediction. This study provides new insights into the prediction of rock instability, which has theoretical implications for the stability of subsurface engineering rock masses.     

ACTIVE CONTROL OF A FLEXIBLE CANTILEVER PLATE WITH MULTIPLE TIME DELAYS

Active control of a flexible cantilever plate with multiple time delays is investigated using the discrete optimal control method. A controller with multiple time delays is presented. In this controller, time delay effect is incorporated in the mathematical model of the dynamic system throughout the control design and no approximations and assumptions are made in the controller derivation, so the system stability is easily guaranteed. Furthermore, this controller is available for both small time delays and large time delays. The feasibility and efficiency of the proposed controller are verified through numerical simulations in the end of this paper.     

PARALLEL FINITE ELEMENT ANALYSIS OF HIGH FREQUENCY VIBRATIONS OF QUARTZ CRYSTAL RESONATORS ON LINUX CLUSTER

Quartz crystal resonators are typical piezoelectric acoustic wave devices for frequency control applications with mechanical vibration frequency at the radio-frequency （RF） range. Precise analyses of the vibration and deformation are generally required in the resonator design and improvement process. The considerations include the presence of electrodes, mountings, bias fields such as temperature, initial stresses, and acceleration. Naturally, the finite element method is the only effective tool for such a coupled problem with multi-physics nature. The main challenge is the extremely large size of resulted linear equations. For this reason, we have been employing the Mindlin plate equations to reduce the computational difficulty. In addition, we have to utilize the parallel computing techniques on Linux clusters, which are widely available for academic and industrial applications nowadays, to improve the computing efficiency. The general principle of our research is to use open source software components and public domain technology to reduce cost for developers and users on a Linux cluster. We start with a mesh generator specifically for quartz crystal resonators of rectangular and circular types, and the Mindlin plate equations are implemented for the finite element analysis. Computing techniques like parallel processing, sparse matrix handling, and the latest eigenvalue extraction package are integrated into the program. It is clear from our computation that the combination of these algorithms and methods on a cluster can meet the memory requirement and reduce computing time significantly.     

ELECTRICALLY FORCED THICKNESS-SHEAR VIBRATIONS OF QUARTZ PLATE WITH NONLINEAR COUPLING TO EXTENSION

We study electrically forced nonlinear thickness-shear vibrations of a quartz plate resonator with relatively large amplitude. It is shown that thickness-shear is nonlinearly coupled to extension due to the well-known Poynting effect in nonlinear elasticity. This coupling is relatively strong when the resonant frequency of the extensional mode is about twice the resonant frequency of the thickness-shear mode. This happens when the plate length/thickness ratio assumes certain values. With this nonlinear coupling, the thickness-shear motion is no longer sinusoidal. Coupling to extension also affects energy trapping which is related to device mounting. When damping is 0.01, nonlinear coupling causes a frequency shift of the order of 10^-6 which is not insignificant,and an amplitude change of the order of 10^-8. The effects are expected to be stronger under real damping of 10^-5 or larger. To avoid nonlinear coupling to extension, certain values of the aspect ratio of the plate should be avoided.     

微波烧结Al_2O_3陶瓷的研究

简要介绍了微波烧结的特点,对 Ａｌ２ Ｏ３ 陶瓷的微波烧结过程进行了介绍和分析,并同常规烧结进行了对比实验,在此基础上得出了一些结论,为陶瓷微波烧结提供了实验依据     

Cl+F2→ClF+F和F+ClF′→ClF+F′反应机理的密度泛函理论研究

用密度泛函理论（ＤＦＴ）Ｂ３ＬＹＰ方法,在６－３３１Ｇ＊基组下,计算研究了反应Ｃｌ＋Ｆ２→ＣｌＦ＋Ｆ和对称反应Ｆ＋ＣｌＦ’→ＣｌＦ＋Ｆ’的机理。求得前者的过渡态为三角形,活化能为１５．５７ｋＪ·ｍｏｌ＾－１;后者的过渡态为线形和三角形,活化能分别为１１．５２和１９６．２５ｋＪ·ｍｏｌ＾－１。结果均经过振动分析和ＩＲＣ计算验证。     

电沉积－退火工艺制备铜铟硒太阳能电池薄膜及表征

利用电沉积硒气氛下后续退火的工艺制备出了高结晶质量的铜铟硒薄膜．通过X射线衍射、扫描电子显微镜、拉曼光谱、紫外-可见-近红外光谱和阻抗谱技术对退火后的铜铟硒薄膜进行表征,结果表明530 oC硒化退火后的铜铟硒薄膜具有四方的黄铜矿晶体结构,晶粒尺寸达到微米量级,光学带隙为0.98 eV,经过KCN溶液去除表面高导电性的铜硒化合物后铜铟硒薄膜的载流子浓度在10¹⁶ cm^-3量级．利用硒化退火的铜铟硒薄膜作为光吸收层制备了结构为AZO/i-ZnO/CdS/CIS/Mo/glass的太阳能电池,在AM1.5光照条件下对其电流-电压特性测试后发现面积为0.2 cm²的电池可以达到0.96％的能量转换效率,并对限制电池效率的原因做出了初步的分析和讨论.