The key elements of traceability in chemical measurement: agreed or still under debate?

Talking about "traceability" means talking about a "property of the result of a measurement", about "the value of a standard", about "stated references" and about an "unbroken chain of comparisons". It describes by which comparison, and to which other value, the result of a measurement has been obtained, i.e. is "traceable to". It is about the underlying structure of the measurement process of the result of a measurement and therefore about the authority of the result. Since values carried by (certified) reference materials have also been obtained by measurement, the definition of traceability equally applies. Traceability in the context of reference materials is also about the authority of the values carried by the (certified) reference materials and is, therefore, of key importance for the authority of the reference materials themselves. Hence, values of results of measurements constitute part of the traceability chain and their uncertainties are an intrinsic accompanying phenomenon. Uncertainties need a traceability chain against which they can be evaluated, and a traceability chain is an a priori requirement for evaluating the uncertainty budget of a measurement result. An attempt has been made to exemplify "traceability" chains in some types of chemical measurement and to identify the degree of international agreement on the key elements of "traceability". It is concluded that there is less than universal agreement on this issue. The debate should continue in order to arrive at the international understanding and agreement needed, as "traceability" is now being incorporated in the International Organization for Standardization (ISO), the International Laboratory Accreditation Co-operation (ILAC) and in other "guiding" or regulatory documents. It is also the reason why the Institute for Reference Materials and Measurements (IRMM) has taken up the study of the concept in its core programme on Metrology in Chemistry, and why it sponsored the Workshop in Bratislava.     

Synthesis and Photochemical Behaviour of 2-Amino-1,3-Cyclohexadienes

The reaction of the 4,4-dialkylated 2-cyclohexenones 1 or 2 with a twofold excess of a secondary amine 3 affords the 2-amino-1,3-cyclohexadienes 4 and 5 , respectively. Irradiation (λ ≧ 300 nm) of the morpholino derivative 4a yields a mixture of the isomeric 3-morpholino-6-methyl-1,3,5-heptatrienes 6 and 7 , while 5 gives only one corresponding product 8 . The reaction of enone 1 with an equimolar amount of pyrrolidine ( 3c ) affords the bis-enamine 9 which is converted to the unsaturated diketone 10 by oxidative hydrolysis.     

Zur Analyse des Flu?spats

Zusammenfassung Die Analyse hochprozentigen Flußspats wird in ihrer derzeitigen Ausführungsform beschrieben. Nach Beseitigung carbonatischer Begleiter durch eine Behandlung mit verd. Essigsäure wird die Kieselsäure entweder mit Flußsäure verflüchtigt und aus dem Gewichtsverlust bestimmt oder in einer gesonderten, mit Soda aufgeschlossenen Probe als Tetrapyridiniumdodecamolybdatosilicat gefällt und als SiO₂ + 12 MoO₃ ausgewogen. Der Bariumsulfatgehalt wird nach Verflüchtigung der Kieselsäure durch Abrauchen des verbleibenden Rückstandes mit Schwefelsäure und anschließendes Kochen mit verd. Salzsäure/Schwefelsäure in der üblichen Art ermittelt. Im Filtrat der Bariumsulfatfällung wird Calcium nach Abtrennung oder Maskierung der dreiwertigen Begleiter als Oxalat gefällt und zum Oxid verglüht oder direkt durch eine photometrische Titration mit ÄDTA bestimmt. Der kleine Sulfidschwefelgehalt in Flußspat wird durch Säure als Schwefelwasserstoff ausgetrieben, als Cadmiumsulfid gebunden und anschließend jodometrisch bestimmt.Für Kieselsäure, Bariumsulfat und Calciumfluorid ergibt die Fehlerrechnung Standardabweichungen von ^s SiO₂=0.04%; sBaSO₄=±0,04%; sCaF₂=±0,09%.

---

Summary The present form of the analysis of high-percentage fluorspar is described. After removal of accompanying carbonates by treatment with dilute acetic acid, the silica is either volatilized with hydrofluoric acid and determined from the loss of weight or precipitated in a separate sample, decomposed with sodium carbonate, as tetrapyridinium dodecamolybdatosilicate and weighed as SiO₂ + 12 MoO₃. After volatilization of silica the remaining residue is fumed with sulphuric acid, boiled with a dilute hydrochloric/sulphuric acid mixture and the barium sulphate determined gravimetrically. In the filtrate of the barium sulphate precipitation the trivalent elements are either separated or masked. Then calcium is precipitated as oxalate and weighed after conversion to the oxide or directly determined by photometric titration with EDTA. After conversion to hydrogensulphide, the small sulphide-sulphur content in fluorspar is bound as cadmium sulphide and determined iodometrically.The error calculation results in the following standard deviations for silica, barium sulphate, and calcium fluoride: ^s SiO₂=0.04%; sBaSO₄=±0,04%; sCaF₂=±0,09%.

     

Direct determination of free methionine in soy-based infant formula

A method was developed for the direct determination of free methionine in soy-based infant formula, with analyte separation and quantitation by reversed-phase liquid chromatography (LC), and UV absorbance at 214 nm, respectively. Sample preparation required only dilution with mobile phase and syringe filtration. Using a 0.02M KH2PO4 mobile phase (pH adjusted to 2.9 with 85% o-phosphoric acid) and 0.7 mL/min flow rate, methionine eluted at approximately 8 min, and total run time was 14 min after column regeneration with acetonitrile-water. System linearity was demonstrated as peak area versus analyte concentration, ranging from 80 to 120% of the formula specification for free methionine (r > 0.999, and all residuals < 0.45%). Intermediate precision relative standard deviation values were < 1.5% for ready-to-feed and reconstituted powder samples, and recoveries ranged from 98.0 to 103.5% for inter-method comparison with an amino acid analyzer method. The limit of quantitation was 3 mg methionine/L in the "as fed" infant formula. Despite the relatively weak UV absorptivity of methionine, the 214 nm signal was sufficiently intense in the 30-65 mg/L (201-436 microM) range to afford quantitation by peak area proportionation versus a 2-point external standard calibration. This direct UV detection after reversed-phase LC separation provides a simple and accurate method for determining free methionine without derivatization.     

ETUDE DE LA FRAGMENTATION DE N-ARYL ET DE N-ALKYL AMINOCETONES EN SPECTROMETRIE DE MASSE

A Comparison of the chemical ionisation and elctron-impact mass spectra of alkyl and aryl aminoketones has bee carried out. This has revealed the particular stabilization of the N-aryl grops in all cases.     

Zinc solid-state NMR spectroscopy of human carbonic anhydrase: implications for the enzymatic mechanism

The pH dependence of the (67)Zn solid-state nuclear magnetic resonance spectroscopy of human carbonic anhydrase (CAII) has been investigated to characterize the nature of the fourth ligand. CAII, through the Zn(2+)-bound hydroxide, catalyzes the deceptively simple reaction: CO(2) + H(2)O <==> HCO(3)(-) + H(+). The accepted mechanism for CAII would predict that water would be bound to the Zn(2+) at pH 5 and hydroxide would be bound at pH 8.5. The measured values for the electric field gradient (EFG) or quadrupole coupling constant (Cq) for CAII are independent of pH within the limits of the experimental error, i.e., 9.8 +/- 0.2 MHz. The EFG interaction has been predicted by ab initio electronic structure calculations for water and hydroxide bound to the zinc, including various levels of hydrogen bonding. After comparing the predicted Cq's with the experimental values, we conclude that the species present from pH 5-8.5 is the hydroxide form. The NMR data presented here is not consistent with the accepted mechanism for CAII. We show that the NMR data is consistent with an alternative mechanism of CAII.     

Substituent effects in chemical carcinogenesis: Methyl derivatives of the benzacridines

An explanation for the different carcinogenic potencies observed among methyl derivatives of the angular benzacridines is given in terms of the tendencies of these compounds to undergo specific metabolic activating reactions analogous to those of polycyclic aromatic hydrocarbons. Theoretical reactivity indices representing these reactions correlate with the carcinogenic activities of these compounds.