Ultrafast dynamics of room temperature ionic liquids after ultraviolet femtosecond excitation

The photochemistry and relaxation dynamics of four room-temperature ionic liquids (RTILs) after ultraviolet (UV) photolysis were investigated by femtosecond pump-probe absorption spectroscopy. A pulse duration-limited rise of the induced absorption in halide-containing RTILs at various probe wavelengths was attributed to the generation of solvated electrons. With continuous irradiation (static conditions), di- and trihalide ion formation became apparent especially below 1000 nm. The formation of trihalide ions was further confirmed by steady-state UV absorption spectroscopy. All RTILs showed a rich photochemistry after UV photolysis leading to the build-up of various long-lived intermediate products as evidenced from the observation that ionic liquids turn yellow upon continuous irradiation. On the other hand, exposing RTILs to the excitation pulse for a short time (rapid-scan method) significantly suppressed the formation of halides. The results suggest that the development of flow-cell systems for highly viscous ionic liquids is urgently needed to quantitatively investigate their ultrafast dynamics.     

Synthesis of a diarylheptanoid, (+)-centrolobine

A chiron approach for the total synthesis of (+)-centrolobine has been described from the commercially available aldehyde 3 employing an acid-catalyzed stereoselective formation of tetrahydropyran ring as the key step. The desired molecule was accomplished in eight steps with 62% overall yield.     

A Validated, Specific Stability-Indicating RP-LC Method for Moxifloxacin and Its Related Substances

A validated, specific, stability-indicating reversed-phase liquid chromatographic method has been developed for quantitative analysis of moxifloxacin and its related substances in bulk samples and pharmaceutical dosage forms in the presence of degradation products and process-related impurities. Forced degradation studies were performed on bulk samples of moxifloxacin, in accordance with ICH guidelines, using acidic, basic, and oxidizing conditions, and thermal and photolytic stress, to show the stability-indicating power of the method. Significant degradation was caused by oxidative stress and by basic conditions; no degradation was observed under the other stress conditions. The method was optimized by analysis of the samples generated during the forced degradation studies and sample solutions spiked with the impurities. Good resolution between the analyte peak and peaks corresponding to process-related impurities and degradation products was achieved on a C₁₈ column with a simple linear mobile phase gradient prepared from aqueous sodium dihydrogen orthophosphate dihydrate containing triethylamine, pH adjusted to 3.0 with orthophosphoric acid, and methanol. Detection was performed at 240 nm. Limits of detection and quantification were established for moxifloxacin and its process related impurities. When the stressed test solutions were assayed against moxifloxacin working standard solution the mass balance was always between 99.3 and 100.1%, indicating the method was stability-indicating. The method was validated in accordance with ICH guidelines, and found to be suitable for checking the quality of bulk samples of moxifloxacin at the time of release of a batch and during storage (long term and accelerated stability testing was conducted).     

Rational assembly of soluble copper(II) phosphonates: synthesis, structure and magnetism of molecular tetranuclear copper(II) phosphonates

The reactions of the dinuclear copper complexes [Cu(2)(L)(OAc)] [H(3)L = N,N'-(2-hydroxypropane-1,3-diyl)bis(salicylaldimine) or [Cu(2)(L')(OAc)] (H(3)L' = N,N'-(2-hydroxypropane-1,3-diyl)bis(4,5-dimethylsalicylaldimine)] with various phosphonic acids, RPO(3)H(2) (R = t-Bu, Ph, c-C(5)H(9), c-C(6)H(11) or 2,4,6-i-Pr(3)-C(6)H(2)), leads to the replacement of the acetate bridge affording tetranuclear copper(II) phosphonates, [Cu(4)(L)(2)(t-BuPO(3))](CH(3)OH)(2)(C(6)H(6)) (1), [Cu(4)(L)(2)(PhPO(3))(H(2)O)(2)(NMe(2)CHO)](H(2)O)(2) (2), [Cu(4)(L')(2)(C(5)H(9)PO(3))](CH(3)OH)(2) (3), [Cu(4)(L')(2)(C(6)H(11)PO(3)](MeOH)(4)(H(2)O)(2) (4) and [Cu(4)(L')(2)(C(30)H(46)P(2)O(5))](PhCH(3)) (5). The molecular structures of 1-4 reveal that a [RPO(3)](2-) ligand is involved in holding the four copper atoms together by a 4.211 coordination mode. In 5, an in situ formed [(RPO(2))(2)O](4-) ligand bridges two pairs of the dinuclear subunits. Magnetic studies on these complexes reveal that the phosphonate ligand is an effective conduit for magnetic interaction among the four copper centers present; a predominantly antiferromagnetic interaction is observed at low temperatures.     

A validated stability-indicating RP-HPLC assay method for Amsacrine and its related substances

A validated specific stability indicating reversed-phase high-performance liquid chromatography method was developed for the quantitative determination of Amsacrine as well as its related substances determination in bulk samples, in presence of degradation products, and its process related impurities. Forced degradation studies were performed on bulk samples of Amsacrine as per International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human use (ICH) prescribed stress conditions using acid, base, oxidative, thermal stress, and photolytic degradation to show the stability indicating power of the method. Significant degradation was observed during basic hydrolysis, slight degradation was observed in oxidative and thermal stress, and no degradation was observed in other stress conditions. The chromatographic method was optimized using the samples generated from forced degradation studies and the impurity spiked solution. Good resolution between the peaks corresponds to process-related impurities and degradation products from the analyte were achieved on Inertsil ODS column using the mobile phase consists a mixture of 1.0% triethyl amine in 20 mM potassium dihydrogen orthophosphate, with pH adjusted to 6.5, with ortho phosphoric acid in water and acetonitrile using a simple linear gradient. The detection was carried out at wavelength 248 nm. The mass balance in each case was in between 99.4% to 99.9%, indicating that the developed method was stability-indicating. Validation of the developed method was carried out as per ICH requirements. The developed method was found to be suitable to check the quality of bulk samples of Amsacrine at the time of batch release and also during its stability studies.     

Synthesis and spectroscopic characterization of Cu(II) containing chlorocadmiumphosphate Cd(HPO4)Cl·[H3N(CH2)6NH3]0.5 crystals

Chlorocadmiumphosphate Cd(HPO(4))Cl·[H(3)N(CH(2))(6)NH(3)](0.5) crystals containing Cu(II) ions have been successfully synthesized at room temperature by using organic amine 1,6-diamino hexane as a template. The samples are characterized by X-ray powder diffraction, Thermal and spectroscopic studies. These are crystallizes in the monoclinic crystal system with cell dimensions: a=1.7697, b=0.6576, c=1.9026nm and β=106.5°. FT-IR spectrum showed the absorption bands related to PO(4), NH(3)(+) ions and other organic molecule vibrations originated from the templated molecule. The prepared crystals are stable at room temperature and as well as up to around 300°C which were confirmed by thermal analysis. Optical absorption and EPR studies suggest that Cu(II) ion enters in to the lattice as tetragonally distorted octahedral symmetry, for which crystal field and spin-Hamiltonian parameters are calculated. Bonding parameters are suggesting that there exists partial covalent nature between Cu(II) ions and ligands.     

Bismuth-ferrocene carboxylates: synthesis and structure

The reaction of ferrocenedicarboxylic acid with triphenylbismuth in a 1?:?1 ratio under solvothermal conditions afforded the 1D coordination polymer [Bi(2)(μ(2)-η(2)-OOCFcCOO-μ(2)-η(2))(η(2)-OOCFcCOO-η(2))(μ(2)-η(2)-OOCFcCOO-η(2))](n) (1). In this polymer two types of bismuth centers (hepta- and octacoordinate) are present and are interconnected by the bridging coordination of ferrocene dicarboxylate ligands. The reaction of ferrocenecarboxylic acid with triphenylbismuth in a 1?:?3 ratio, in toluene, under refluxing conditions, afforded the 1D coordination polymer [Bi(μ(2)-η(2)-FcCOO)(η(2)-FcCOO)(2)](n) (2). In the solid state, 2 exists as a helical polymer, where the inner bismuth chain is enclosed by an external sheath of ferrocene carboxylate ligands. In solution, however, 2 decomposes into the monomeric repeat unit [Bi(FcCOO)(3)] which is indicated by ESI-MS as well as cyclic voltammetric studies. Thus, a single, quasi-reversible redox event is seen for 2 in solution. The reaction of triphenylbismuth with ferrocenecarboxylic acid in a 1?:?1 stoichiometry afforded the molecular dimer [Bi(2)(μ(2)-η(2)-FcCOO)(2)(η(2)-FcCOO)(4)(H(2)O)(4)]·(2FcCOOH) (3). Compounds 1-3 reveal rich supramolecular architectures in the solid state as a result of the presence of C-HO, C-Hπ and ππ interactions.     

Nonlocal correlations in normal-metal superconducting systems

We examine nonlocal effects between normal-metal gold probes connected by superconducting aluminum. For highly transparent Au/Al interfaces, we find nonlocal voltages that obey a spatial and temperature evolution distinct from the nonequilibrium charge imbalance signals usually found in such systems. These voltages are consistent with the predicted effects of crossed Andreev reflection and elastic cotunneling, effects that involve coherent correlations between spatially separated electrons.