Rietveld refinement, microstructure, conductivity and impedance properties of Ba[Zr0.25Ti0.75]O3 ceramic

In this work, we report the Rietveld refinement, microstructure, conductivity and impedance properties of Ba[Zr_0.25Ti_0.75]O₃ ceramic synthesized by solid state reaction. This ceramic was characterized by X-ray diffraction, Rietveld refinement, scanning electron microscopy and energy dispersive X-ray spectrometry. Impedance spectroscopy analyses reveals a non-Debye relaxation phenomenon being its relaxation frequency moving toward to positive side with increase of temperature. A significant shift in impedance loss peaks toward higher frequency side indicates conduction in material and favoring the long range motion of mobile charge carriers. The frequency dependent ac conductivity at different temperatures indicates that the conduction process is thermally activated. The variation of dc conductivity exhibited a negative temperature coefficient of resistance behavior. The ac conductivity data are used to evaluate the density of states at Fermi level and activation energy of this ceramic. The dc electrical and thermal conductivities of grain and grain boundary have been discussed.     

Novel design model for the stator currents subsystem of induction motors

The stator currents subsystem is a vital element of many high-performance induction motor control schemes. While there are several control techniques available for this subsystem, traditional linear controllers are still widely used because of its simplicity and proven effectiveness. However, the traditional simplified design-model lacks important information, necessary for the design of high-performance and robust controllers. In this article a novel design-model intended for linear controller formulation and evaluation is developed. This new mathematical representation captures several elements which are missing in the traditional representation, maintaining at the same time a similar level of simplicity. Along the derivation of this new representation several models of decreasing complexity and comprehensiveness are also presented together with a critical classification. This classification is intended to aid the designer in choosing the appropriate mathematical representation for specific purposes. Finally, the article is accompanied with experimental findings which illustrate the use of the proposed model.     

Real plane algebraic curves

We study real algebraic plane curves, at an elementary level, using as little algebra as possible. Both cases, affine and projective, are addressed. A real curve is infinite, finite or empty according to the fact that a minimal polynomial for the curve is indefinite, semi-definite nondefinite or definite. We present a discussion about isolated points. By means of the P operator, these points can be easily identified for curves defined by minimal polynomials of order bigger than one. We also discuss the conditions that a curve must satisfy in order to have a minimal polynomial. Finally, we list the most relevant topological properties of affine and projective, complex and real plane algebraic curves.     

The application of multiplexed,multi‐dimensional ultra‐high‐performance liquid chromatography/tandem mass spectrometry to the high‐throughput screening of lysosomal storage disorders in newborn dried bloodspots

Lysozomal storage disorders are just beginning to be routinely screened using enzyme activity assays involving dried blood spots and tandem mass spectrometry (MS/MS). This paper discusses some of the analytical challenges associated with published assays including complex sample preparation and potential interference from excess residual substrate. Solutions to these challenges are presented in the form of on‐line two‐dimensional chromatography to eliminate off‐line liquid‐liquid extraction (LLE) and solid‐phase extraction (SPE), the use of ultra‐high‐performance liquid chromatography (UHPLC) to separate excess substrate from all other analytes and multiplexed sample introduction for higher throughput required of a population screening assay. High sensitivity, specificity and throughput were demonstrated using this novel method. Copyright © 2010 John Wiley & Sons, Ltd.     

Immobilized ruthenium complexes and aspects of their reactivity

Methodologies for the immobilization and characterization of ruthenium complexes into/onto functionalized silica gel, zeolites, polymers, dendrimers, sol–gel, nano and microparticles are described. The corresponding spectroscopic, electrochemical, and photochemical properties as well as chemical reactivities are used for their characterization and study. Comparison between the reactivities of immobilized and in solution species is presented. Some biological applications are also described.     

Determination of the mineral composition of fresh bovine milk from the milk-producing areas located in the State of Sergipe in Brazil and evaluation employing exploratory analysis

In this work, the mineral composition of fresh bovine milk obtained from the milk-producing areas of the Brazilian State of Sergipe was examined. A dry-ashed digestion method and the ICP OES technique were used for the quantification of mineral elements (e.g., Ca, Mg, K, Na, P, Sr and Zn) in 27 samples of milk collected from properties located in milk-producing areas around Nossa Senhora da Glória. The following ranges of values (% m/v) were obtained: 0.063 to 0.117 for Ca; 0.060 to 0.114 for P; 0.024 to 0.064 for Na; and 0.087 to 0.164 for K. The ranges of values (mg L^− 1) for the other mineral elements were also found: 0.68 to 1.89 for Sr; 2.46 to 5.73 for Zn; and 54.2 to 109.9 for Mg. Additionally, the exploratory evaluation of the 27 milk samples was performed using principal component analysis (PCA) involving seven variables dealing with the effect of different management systems (conventional and organic) on milk composition. The results show that there are indeed differences between the mineral composition of milk from properties that use organic practices and those that use conventional management practices.     

Negishi cross-coupling of organotellurium compounds: synthesis of biaryls, aryl-, and diaryl acetylenes

A functional group tolerant palladium-catalyzed Negishi coupling of diaryl tellurides with organozinc has been developed. This methodology permits efficient preparation of biaryls, aryl acetylenes and diaryl acetylenes in moderate to good yields. A preliminary study to gain further insight into the reaction was performed using in situ ReactIR technology.     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of thiometallate complexes and catalytic hydration of acetonitrile

The bimetallic complexes [M(bipy)nS2M′X2], where M=FeII, RuII, NiII or CoII; bipy=2,2′-bipyridine; n=1 or 2; M′=MoVI or WVI and X=O or S, were synthesized using tetrathiometallates and dithiometallates as bidentate ligands. The characterization of the new bimetallic complexes was carried out by standard techniques. The complexes were tested as catalysts in acetonitrile hydrolysis. The reaction products are acetamide and acetic acid, formed by hydrolysis of acetamide. The most active catalysts in the acetonitrile hydrolysis are [Fe(bipy)2S2MoS2], [Ru(bipy)2S2MoS2] and [Co(bipy)2S2WS2], whereas the lowest activity is shown by the nickel complexes. However, the latter exhibit the highest selectivity in acetamide formation. ZINDO semi-empirical calculations were performed in order to explain some of the properties of the complexes. This revised version was published online in June 2006 with corrections to the Cover Date.     

Environmental inversion using high-resolution matched-field processing

This paper considers the inversion of experimental field data collected with light receiving systems designed to meet operational requirements. Such operational requirements include system deployment in free drifting configurations and a limited number of acoustic receivers. A well-known consequence of a reduced spatial coverage is a poor sampling of the vertical structure of the acoustic field, leading to a severe ill-conditioning of the inverse problem and data to model cost function with a massive sidelobe structure having many local extrema. This causes difficulties to meta-heuristic global search methods, such as genetic algorithms, to converge to the true model parameters. In order to cope with this difficulty, broadband high-resolution processors are proposed for their ability to significantly attenuate sidelobes, as a contribution for improving convergence. A comparative study on simulated data shows that high-resolution methods did not outperform the conventional Bartlett processor for pinpointing the true environmental parameter when using exhaustive search. However, when a meta-heuristic technique is applied for exploring a large multidimensional search space, high-resolution methods clearly improved convergence, therefore reducing the inherent uncertainty on the final estimate. These findings are supported by the results obtained on experimental field data obtained during the Maritime Rapid Environmental Assessment 2003 sea trial.