Comparison of sediment pollution in the rivers of the Hungarian Upper Tisza Region using non-destructive analytical techniques

The rivers in the Hungarian Upper Tisza Region are frequently polluted mainly due to mining activities in the catchment area. At the beginning of 2000, two major mining accidents occurred in the Romanian part of the catchment area due to the failure of a tailings dam releasing huge amounts of cyanide and heavy metals to the rivers. Surface sediment as well as water samples were collected at six sites in the years 2000–2003, from the northeast-Hungarian section of the Tisza, Szamos and Túr rivers. The sediment pollution of the rivers was compared based on measurements of bulk material and selected single particles, in order to relate the observed compositions and chemical states of metals to the possible sources and weathering of pollution. Non-destructive X-ray analytical methods were applied in order to obtain different kinds of information from the same samples or particles. In order to identify the pollution sources, their magnitude and fate, complementary analyses were carried out. Heterogeneous particulate samples were analyzed from a large geographical territory and a 4-year time period. Individual particles were analyzed only from the “hot” samples that showed elevated concentrations of heavy metals. Particles that were classified as anthropogenic were finally analyzed to identify trace concentrations and chemical states of heavy metals.     

Joint QTAIM and Hirshfeld study of the sigma and pi charge distribution and electron delocalization in carbonyl compounds: a comparative study with the resonance model

Atomic charges and delocalization indexes (DIs) for a series of carbonyl compounds comprising dimethyl ketone, acetaldehyde, acetic acid, methyl acetate, acetamide, methyl vinyl ketone, divinyl ketone, and benzoic acid were studied using two different atomic partitionings: the QTAIM and the Hirshfeld (stockholder) scheme. The resonance model, traditionally employed to explain the reactivity of these compounds, is not in line with the total atomic charges and DIs calculated by both methodologies. However, the resonance model is supported to some extent by the pi charges and pi DIs calculated by both schemes, but the calculated values indicate that the pi population delocalizes only to a small degree. Although the absolute values of QTAIM and stockholder atomic charges are significantly different, the pi charges and the values of the DIs show similar trends for all the atoms and molecules of this study; this is especially the case for the pi DIs. A study of the electron density on the level of a single MO performed for CO, H2CO, F2CO, and H2CS reveals that the differences in the atomic sigma charges computed with both partitionings can be traced back to their different treatment of interatomic regions.     

Dual fluorescence (S1, S2) in chrysene and 3,4-benzophenanthrene

S₂ and S₁ fluorescence of chrysene and 3,4 benzophenanthrene has been observed in the vapour phase under collision free conditions. It is shown that the intermediate strong couplinng model can be applied to these molecules. The efficiency of the transfer of the excess energy to collision partners is given for different gases.     

The determination of ammonia in flue gas from the selective catalytic reduction of nitric oxide with ammonia

The emission of NO_x from coal-fired boilers can be limited by means of the selective catalytic reduction of NO_x with ammonia. The amounts of unreacted ammonia downstream should be low to avoid processing and environmental problems. Continuous measurement of the ammonia in the flue gas is needed. The determination of ammonia and flue gas sampling techniques are discussed. Measurements of ammonia in exhausts of a laboratory reactor and of a pilot plant for the selective catalytic reduction of NO_x with ammonia are presented. Ammonia was determined by mass spectrometry and chemiluminescence in the gas phase, and by spectrophotometric (Nessler and Berthollet reactions) or potentiometry in aqueous solution, in low (<5 μl l^?1) and high (<1000 μl l^?1) concentration ranges.     

Gaussian overlap approximation in the projected Hartree–Fock method

A method for the approximate calculation of matrix elements with respect to projected Hartree–Fock wave functions is proposed. The method is tested on some calculations in the many-parameter AMO method. It is found that the approximation reduces the amount of work, involved in the evaluation of the energy, by a factor of five and that it reproduces the exact values to within a few per cent.     

The polarographic determination of stability constants of urea/crown ether complexes in methanol

A general method for determination of the stability constants of complexes of crown ethers and related compounds with small organic molecules in polar solvents is described, based on an indirect polarographic procedure. Computerized evaluation of the data forms an essential part of the procedure.     

Synthesis of 5-alkylidene-2,5-dihydropyrrol-2-ones and their ring-transformation into 5,6-dihydrobenzo[h]chromones, 5,6,7,8-tetrahydrochromones and pyran-4-ones

Acid-mediated ring-transformations of 5-alkylidene-2,5-dihydropyrrol-2-ones, available by cyclization of 1,3-diketone dianions with bis(imidoyl) dichlorides of oxalic acid, resulted in formation of functionalized pyran-4-ones, such as 5,6-dihydrobenzo[h]chromones and 5,6,7,8-tetrahydrochromones.     

Development of a gas chromatography/ion trap mass spectrometry based method for the quantification of polybrominated diphenyl ethers and polychlorinated biphenyls in adipose tissue

A combined gas chromatographic mass spectrometric (GC/MS/MS) method for the determination of seven polybrominated diphenyl ethers (PBDEs) and seven marker polychlorinated biphenyls (PCBs) in adipose tissue has been developed. Adipose tissue was melted and filtered through anhydrous sodium sulphate to obtain pure fat. Clean-up was performed using a glass column containing acidified silica, deactivated alumina and anhydrous sodium sulphate. Polybrominated biphenyl (PBB) 155 and Mirex were added as internal standards for PBDEs and PCBs, respectively. Injection standards, PBB 103 and PCB 143, for PBDEs and PCBs, respectively, were added before analysis with GC/MS/MS. The developed GC/MS/MS method has the advantage of being more selective than single MS methods because matrix effects are largely eliminated. Validation of this method was conducted according to Commission Decision 2002/657/EC. Decision limits for PBDEs and PCBs ranged from 0.06-0.15 ng g(-1) and from 0.35-1.22 ng g(-1), respectively. Detection capabilities were all between 0.23-0.55 ng g(-1) for PBDEs and between 0.98-2.29 ng g(-1) for PCBs. Precision, recovery, bias and selectivity were tested, with satisfactory results.