Acrylamide analysis: assessment of results from six rounds of Food Analysis Performance Assessment Scheme (FAPAS) proficiency testing

Six proficiency tests have now been completed in an ongoing program of the UK Food Analysis Performance Assessment Scheme (FAPAS) for the analysis of acrylamide in a range of food matrixes. Homogeneous test material samples were requested by laboratories throughout the world, with 29 to 45 submitting results for each test. Results were analyzed by appropriate statistical procedures, and z-scores were awarded for reported values. In the absence of both legislation and collaborative trial data, the target standard deviation was derived from the Horwitz equation, although it is acknowledged that there is a need to establish a "fit for purpose" target standard deviation specifically for acrylamide analysis. Participants were encouraged to use the analytical method routinely used in their own laboratory and to provide details of their procedure. Close examination of the data submitted indicates that performance is generally acceptable in terms of accuracy. There is no significant difference between results submitted by gas chromatography and liquid chromatography (GC and LC) methods, and no method dependency on the use of internal standards or sample size. However, choice of extraction solvent may be important, with indications that plain water is an acceptable extraction method. There is evidence from the most recent test that direct (underivatized) GC methodology may present problems, but more data are required and this aspect will be monitored in the continuing proficiency testing program.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Chromatographic studies of corrosion sites in metallic materials

Many types of corrosion phenomena are controlled by the ionic composition of a small volume of solution at the surface. Localized corrosion and atmospheric corrosion are two examples in which < 1 μl of solution can cause dramatic damage. Ion chromatographic (IC) techniques have been used to analyze these solutions in order to gain a better understanding of the mechanisms which govern them. Two examples are presented. The presence of minor alloying elements at localized corrosion sites in two aluminum alloys has been demonstrated, indicating non-stoichiometric dissolution of the alloy during localized corrosion. In addition, IC analysis allowed the determination of the species responsible for the atmospheric corrosion failure of electrical connectors, including their likely origin.     

Magnetic nanoparticle assemblies on denatured DNA show unusual magnetic relaxivity and potential applications for MRI

Denatured (substantially single-stranded) herring sperm DNA acts as a template for the preparation of magnetic nanowires, forming stable aqueous suspensions, which exhibit unprecedentedly high relaxivity at low field, suggesting that the material may be a potentially useful reagent for MRI.     

Development of electrophoretic conditions for the characterization of protein glycoforms by capillary electrophoresis—electrospray mass spectrometry

A capillary electrophoresis (CE) method using acidic buffers and capillaries coated with Polybrene, a cationic polymer has been developed for the separation of glycoproteins and glycopeptides. Electrophoretic conditions have been optimized to provide resolution of individual glycoforms observed for different glycoprotein preparations. These conditions were found to be entirely compatible with the operation of electrospray mass spectrometry (ESMS), which facilitated the assignments of possible carbohydrate compositions of glycopeptides arising from digests of glycoproteins. By using operating conditions enhancing the formation of oxonium fragment ions prior to mass spectral analysis, selective identification of glycopeptides was achieved for complex samples such as those from proteolytic digests or chemical cleavages. Examples of applications are presented for ribonuclease B, ovalbumin, horseradish peroxidase, and a lectin from Erithrina corallodendron using both CE-ESMS and CE with ultraviolet detection (CE-UV).     

Specific determination of 20 primary aromatic amines in aqueous food simulants by liquid chromatography-electrospray ionization-tandem mass spectrometry

A multi-analyte method without any pre-treatment steps using reversed-phase liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) was developed and applied for the determination of 20 primary aromatic amines (PAA) associated with polyurethane (PUR) products or azo-colours. The method was validated in-house for water and 3% acetic acid food simulants using spiked migrates from plastic laminates. Detection limits ranged from 0.27 to 3 microg amine/L food simulants, and RSD values of within-laboratory reproducibility at the 2 microg PAA/L level ranged from 3.9 to 19%. PAA migration from plastic laminates and black nylon cooking utensils were determined with the method, and high levels of 4,4'-methylenedianiline and aniline were found in migrates from about half of the tested cooking utensils. The method fulfils present legislative demands in the EU for screening and verification of PAA migration from food contact materials.     

210Pb/210Po isotope generator

As a continuation of previous work (Kmak et al. in J Radioanal Nucl Chem 314:985–989, 2017), an isotope generator column based on the ²¹⁰Pb decay chain has been made to produce highly radiopure ²¹⁰Po. Two replicate studies were performed on AG 50Wx8 columns with an average yield of 90.4 ± 1.9%. ²¹⁰Pb breakthrough was seen at the 6 month elution for both generators.

     

Deuterium/hydrogen isotope ratio measurement of water and organic samples by continuous-flow isotope ratio mass spectrometry using chromium as the reducing agent in an elemental analyser

A rapid continuous-flow technique for quantitative determination of hydrogen isotope ratios in water and organic materials at natural abundance levels is described. Water and organic samples were reduced in a helium stream at temperatures in excess of 1000 degrees C over chromium metal. delta(2)H per thousand values of water and organic samples were determined by calibration against International Atomic Energy Agency reference materials V-SMOW and SLAP water. The accuracy of the method was demonstrated through the analysis of the intermediate water standard GISP and IAEA water intercomparison materials OH-1, OH-2 and OH-3. Values obtained using this technique compared well with reference values (maximum difference 2.2 per thousand). The precision of water analyses was less than 2.3 per thousand (1 sigma or 1 standard deviation) in all cases. No apparent memory effect was observed when measuring samples at the natural abundance level. The application of the technique to organic molecules and the salts of organic acids was successfully demonstrated by measuring the delta(2)H per thousand values of an n-hexadecane laboratory reference and anhydrous calcium formate versus water calibration materials. Copyright Crown copyright 2001. Reproduced with permission of the Controller of Her Majesty's Stationery Office. Published by John Wiley & Sons, Ltd.     

Synthesis of [ethylene-1-(eta(5)-4,5,6,7-tetrahydro-1-indenyl)-2- (eta(5)-4',5',6',7'-tetrahydro-2'-indenyl)]titanium dichloride, the elusive isomer of the Brintzinger-type ansa-titanocenes

We present a short synthesis of 1-(2-indenyl)-2-(3-indenyl)ethane (5) and a method for its conversion to the ansa-metallocene [ethylene(eta5-inden-1-yl)(eta5-inden-2-yl)]titanium dichloride (13). The synthetic strategy applied to prepare bisindene 5 relies on the efficient alkylation of 2-(phenylsulfonyl)indane followed by HMPA-assisted E1cB-elimination of phenylsulfinate. This tandem sequence circumvents the predisposition of indene to undergo C(1)-alkylation and enables access to C(2)-substituted indenes. The key step in the synthesis of the title ansa-titanocene (4) features a previously unreported equilibration step to generate the bis(indenide anion) of 5. Complexation with TiCl4.(THF)2 followed by hydrogenation of the product metallocene furnishes ansa-titanocene 4.     

Does ionized diacetylene have a positive proton affinity?

Singly and doubly charged C₄H₃^+/2+ ions generated upon electron ionization (EI) of the neutral precursors 1,3-butadiene, benzene, and exo-methylene cyclopropane, respectively, are examined by sector-field mass-spectrometry. Charge stripping of the mass-selected monocations affords the corresponding dications and charge exchange of the C₄H₃²⁺ dications allows for the reverse redox process. Refined analysis and additional MS/MS studies suggest that the monocations are mixtures of isomeric ions formed upon ionization, whereas only a single type of dication seems to be formed. As an average of energy-resolved measurements, a vertical ionization energy of IE_v(C₄H₃⁺)=16.5±0.4 eV is derived. In addition to the experimental work, density functional theory is used for a computational exploration of the mono- and dicationic species. The best theoretical estimates are IE_a(C₄H₃⁺)=16.33 eV and IE_v(C₄H₃⁺)=16.49 eV for the most stable isomer H₂C=C---CCH⁺. Combination of the experimental and theoretical findings leads to the conclusion that the diacetylene cation C₄H₂⁺ has indeed a positive proton affinity of PA(C₄H₂⁺)=1.50±0.42 eV.