Nanostructured ZrO2 and Zr‐C‐N Coatings from Chemical Vapor Deposition of Metal‐Organic Precursors

Nanocrystalline zirconium carbonitride (Zr‐C‐N) and zirconium oxide (ZrO₂) films were deposited by chemical vapor deposition (CVD) of zirconium‐tetrakis‐diethylamide (Zr(NEt₂)₄) and ‐tert‐butyloxide (Zr(OBu^t)₄), respectively. The films were deposited on iron substrates and characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The Zr‐C‐N films show blue, golden brown or bronze colours, with colour stability depending upon the precursor composition (pure metal amide or mixed with Et₂NH). The deposition temperature showed no pronounced effect on the granular morphology of the Zr‐C‐N films. The XRD data of the films correspond to the formation of carbonitride phase whereas the XPS analyses revealed a strong surface oxidation and incorporation of oxygen in the film. The films deposited using a mixture of Zr(NEt₂)₄ and Et₂NH showed higher N content, better adhesion and scratch resistance when compared to films obtained from the CVD of pure Zr(NEt₂)₄. Subject to the precursor composition and deposition temperature (550‐750 °C), the microhardness values of Zr‐C‐N films were found to be in the range 2.11‐5.65 GPa. For ZrO₂ films, morphology and phase composition strongly depend on the deposition temperature. The CVD deposits obtained at 350 °C show tetragonal ZrO₂ to be the only crystalline phase. Upon increasing the deposition temperature to 450 °C, a mixture of tetragonal and monoclinic modifications was formed with morphology made up of interwoven elongated grains. At higher temperatures (550 and 650 °C), pure monoclinic phase was obtained with facetted grains and developed texture.     

Complexation of phenolic guests by endo- and exo-hydrogen-bonded receptors

This article describes the complexation of phenol derivatives by hydrogen-bonded receptors. These phenol receptors are formed by self-assembly of calix[4]arene dimelamine or tetramelamine derivatives with 5,5-diethylbarbiturate (DEB) or cyanurate derivatives (CYA). The double rosette assemblies 3(3).(DEB)6/(CYA)6 have their phenol-binding functionalities (ureido groups) at the top and at the bottom of the double rosette (exo-receptors). The tetrarosette assemblies 4(3).(DEB)12/(CYA)12 form a cavity with binding sites between the two double rosettes for guest encapsulation (endo-receptors). An intrinsic binding constant Ka of 202 M-1 and 286 M-1 for the binding of 4-nitrophenol to the ureido functionalized exo- and endo-receptors, respectively, was observed. For the exo-receptor a 1:6 stoichiometry was observed while for the endo-receptor 1:4 binding stoichiometry was determined by Job plot and MALDI-TOF MS. The important role that the hydroxy group's acidity plays in the complexation of 4-nitrophenol is clarified by binding studies with different phenol derivatives. The hydrogen-bonded receptors showed a much smaller response towards less acidic phenol derivatives.     

Propagation of melting cooperativity along the phosphodiester backbone of DNA

The role of the DNA phosphodiester backbone in the transfer of melting cooperativity between two helical domains was experimentally addressed with a helix-bulge-helix DNA model, in which the bulge consisted of a varying number of either conformationally flexible propanediol or conformationally constrained bicyclic anucleosidic phosphodiester backbone units. We found that structural communication between two double helical domains is transferred along the DNA backbone over the equivalent of ca. 12-20 backbone units, depending on whether there is a symmetric or asymmetric distribution of the anucleosidic units on both strands. We observed that extension of anucleosidic units on one strand only suffices to disrupt cooperativity transfer in a similar way as if extension occurs on both strands, indicating that the length of the longest anucleosidic inset determines cooperativity transfer. Furthermore, conformational rigidity of the sugar unit increases the distance of coopertivity transfer along the phosphodiester backbone. This is especially the case when the units are asymmetrically distributed in both strands.     

Behaviour and design considerations for continuous flow closed-open-closed liquid microchannels

This paper introduces a method of combining open and closed microchannels in a single component in a novel way which couples the benefits of both open and closed microfluidic systems and introduces interesting on-chip microfluidic behaviour. Fluid behaviour in such a component, based on continuous pressure driven flow and surface tension, is discussed in terms of cross sectional flow behaviour, robustness, flow-pressure performance, and its application to microfluidic interfacing. The closed-open-closed microchannel possesses the versatility of upstream and downstream closed microfluidics along with open fluidic direct access. The device has the advantage of eliminating gas bubbles present upstream when these enter the open channel section. The unique behaviour of this device opens the door to applications including direct liquid sample interfacing without the need for additional and bulky sample tubing.     

Limitations of atom-centered dielectric functions in implicit solvent models

Many recent advances in Poisson-Boltzmann and generalized Born implicit solvent models have used atom-centered polynomial or Gaussian functions to define the boundary separating low and high dielectric regions. In contrast to the Lee and Richards molecular surface, atom-centered surfaces result in interatomic crevices and buried pockets of high dielectric which are too small for a solvent molecule to occupy. We show that these interstitial high dielectric regions are of significant magnitude in globular proteins, that they artificially increase solvation energies, and that they distort the free energy surface of nonbonded interactions. These results suggest that implicit solvent dielectric functions must exclude interstitial high dielectric regions in order to yield physically meaningful results.     

Correction strategy for diffusion-weighted images corrupted with motion: application to the DTI evaluation of infants' white matter

Objective

Diffusion imaging techniques such as DTI and HARDI are difficult to implement in infants because of their sensitivity to subject motion. A short acquisition time is generally preferred, at the expense of spatial resolution and signal-to-noise ratio. Before estimating the local diffusion model, most pre-processing techniques only register diffusion-weighted volumes, without correcting for intra-slice artifacts due to motion or technical problems. Here, we propose a fully automated strategy, which takes advantage of a high orientation number and is based on spherical-harmonics decomposition of the diffusion signal.

Material and methods

The correction strategy is based on two successive steps: 1) automated detection and resampling of corrupted slices; 2) correction for eddy current distortions and realignment of misregistered volumes. It was tested on DTI data from adults and non-sedated healthy infants.

Results

The methodology was validated through simulated motions applied to an uncorrupted dataset and through comparisons with an unmoved reference. Second, we showed that the correction applied to an infant group enabled to improve DTI maps and to increase the reliability of DTI quantification in the immature cortico-spinal tract.

Conclusion

This automated strategy performed reliably on DTI datasets and can be applied to spherical single- and multiple-shell diffusion imaging.     

Reversible photomechanical switching of individual engineered molecules at a metallic surface

We have observed reversible light-induced mechanical switching for individual organic molecules bound to a metal surface. Scanning tunneling microscopy (STM) was used to image the features of individual azobenzene molecules on Au(111) before and after reversibly cycling their mechanical structure between trans and cis states using light. Azobenzene molecules were engineered to increase their surface photomechanical activity by attaching varying numbers of tert-butyl (TB) ligands ("legs") to the azobenzene phenyl rings. STM images show that increasing the number of TB legs "lifts" the azobenzene molecules from the substrate, thereby increasing molecular photomechanical activity by decreasing molecule-surface coupling.     

Tailored pump-probe transient spectroscopy with time-dependent density-functional theory: controlling absorption spectra

Recent advances in laser technology allow us to follow electronic motion at its natural time-scale with ultra-fast time resolution, leading the way towards attosecond physics experiments of extreme precision. In this work, we assess the use of tailored pumps in order to enhance (or reduce) some given features of the probe absorption (for example, absorption in the visible range of otherwise transparent samples). This type of manipulation of the system response could be helpful for its full characterization, since it would allow us to visualize transitions that are dark when using unshaped pulses. In order to investigate these possibilities, we perform first a theoretical analysis of the non-equilibrium response function in this context, aided by one simple numerical model of the hydrogen atom. Then, we proceed to investigate the feasibility of using time-dependent density-functional theory as a means to implement, theoretically, this absorption-optimization idea, for more complex atoms or molecules. We conclude that the proposed idea could in principle be brought to the laboratory: tailored pump pulses can excite systems into light-absorbing states. However, we also highlight the severe numerical and theoretical difficulties posed by the problem: large-scale non-equilibrium quantum dynamics are cumbersome, even with TDDFT, and the shortcomings of state-of-the-art TDDFT functionals may still be serious for these out-of-equilibrium situations.     

Effects of adsorption-induced microstructural changes on separation of xylene isomers through MFI-type zeolite membranes

Various factors were found to affect the performance of MFI-type zeolite membranes in separating xylene isomers (p-xylene, PX; o-xylene, OX) by pervaporation. In this work the effect of membrane microstructure, membrane quality, and pervaporation operating conditions were investigated using three membrane microstructures: random, c-oriented, and h,0,h-oriented. Operation under pervaporation conditions means that high loadings of PX will be present in the framework; therefore, the role of PX–framework and PX–OX interactions needs to be taken into consideration. Single component experiments demonstrated that the order of experimentation with OX and PX will affect the ideal selectivity. Multi-component studies showed that membrane performance is highly dependent on the relative concentration of the isomers in the feed; the higher the PX concentration the lower the selectivity observed. However, although high selectivity (18) was observed at low PX concentrations in the feed, it was not stable over time. Similar trends were observed for all membrane microstructures but differences in the selectivity values occurred. The structural deformation caused by high loadings of PX into the silicalite crystal affects each microstructure differently, ultimately leading to differences in performance.     

Novel synthesis of 3-pyrrole substituted β-lactams via microwave-induced bismuth nitrate-catalyzed reaction

Highly stereoselective synthesis of 3-pyrrole substituted β-lactams is accomplished. The first step involves the synthesis of 3-phthalimido substituted β-lactams following Staudinger cycloaddition reaction of acid chloride equivalent with imines. Synthesis of 3-amino β-lactams is achieved via the deprotection of phthalimido group with ethylenediamine. These 3-amino β-lactams are converted to a new series of N-substituted pyrroles at room temperature as well as using microwave-induced bismuth nitrate-catalyzed reaction with an excellent yield. Exclusive formation of trans pyrrole-substituted β-lactams is observed with N-chrysenyl system. The method is equally efficient for the synthesis of racemic as well as optically pure 3-pyrrole substituted β-lactams.