Sulfonation of polystyrene: Toward the “ideal” polyelectrolyte

Sulfonation of narrow polydispersity polystyrene, PS, standards remains the method of choice for generating polystyrene sulfonate, PSS, samples with defined composition. Although a variety of sulfonation techniques have been described, relatively little is reported on the material obtained, which is used for so many studies on the fundamental behavior of polyelectrolytes. Here, we show that powdered polystyrene treated with concentrated sulfuric acid (96%) at 90 °C without catalyst yields fully sulfonated PSS. Extensive characterization with ¹H and ¹³C NMR as well as size exclusion chromatography coupled with static and dynamic light scattering shows no evidence of sulfone crosslinking or chain degradation under the conditions used. Though mono‐sulfonated as soon as it dissolves in the acid, the PSS contains about 6% meta substitution. Sulfonation kinetics for this heterogeneous reaction depend strongly on particle size, sulfuric acid content and temperature. For preparing perdeuterated PSS from the corresponding PS it is essential to employ D₂SO₄, as about half of the aromatic units undergo H/D exchange during sulfonation. The remaining ortho H/D may be exchanged with extended exposure to the concentrated sulfuric acid, but the meta site is deactivated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2416–2624     

1,4-Diazabicyclo[2.2.2]octane as an Efficient Catalyst for a Clean,One-Pot Synthesis of Tetrahydrobenzo[b]pyran Derivatives via Multicomponent Reaction in Aqueous Media

1,4-Diazabicyclo[2.2.2]octane (DABCO) has been used as a mild and efficient catalyst for the synthesis of various tetrahydrobenzo[b]pyran derivatives via a one-pot, three component condensation of aromatic aldehydes, dimedone, and active methylene compounds. This method provides several advantages: a simple workup procedure, environmental friendliness, neutral conditions, and good yields. In addition, water or 50% aqueous ethanol was chosen as a green solvent.

Nanostructured ZrO2 and Zr‐C‐N Coatings from Chemical Vapor Deposition of Metal‐Organic Precursors

Nanocrystalline zirconium carbonitride (Zr‐C‐N) and zirconium oxide (ZrO₂) films were deposited by chemical vapor deposition (CVD) of zirconium‐tetrakis‐diethylamide (Zr(NEt₂)₄) and ‐tert‐butyloxide (Zr(OBu^t)₄), respectively. The films were deposited on iron substrates and characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The Zr‐C‐N films show blue, golden brown or bronze colours, with colour stability depending upon the precursor composition (pure metal amide or mixed with Et₂NH). The deposition temperature showed no pronounced effect on the granular morphology of the Zr‐C‐N films. The XRD data of the films correspond to the formation of carbonitride phase whereas the XPS analyses revealed a strong surface oxidation and incorporation of oxygen in the film. The films deposited using a mixture of Zr(NEt₂)₄ and Et₂NH showed higher N content, better adhesion and scratch resistance when compared to films obtained from the CVD of pure Zr(NEt₂)₄. Subject to the precursor composition and deposition temperature (550‐750 °C), the microhardness values of Zr‐C‐N films were found to be in the range 2.11‐5.65 GPa. For ZrO₂ films, morphology and phase composition strongly depend on the deposition temperature. The CVD deposits obtained at 350 °C show tetragonal ZrO₂ to be the only crystalline phase. Upon increasing the deposition temperature to 450 °C, a mixture of tetragonal and monoclinic modifications was formed with morphology made up of interwoven elongated grains. At higher temperatures (550 and 650 °C), pure monoclinic phase was obtained with facetted grains and developed texture.     

On the trimerization of cyanoacetylene: mechanism of formation of tricyanobenzene isomers and laboratory detection of their radio spectra

In support of a deeper understanding of the chemistry of cyanoacetylene--a known constituent of planetary atmospheres and interstellar space--theoretical and experimental studies address the chemical mechanism of dimerization and trimerization, and provide high-resolution rotational spectra of two of the trimeric products, 1,2,3- and 1,2,4-tricyanobenzene. Analysis of the rotational spectra is particularly challenging because of quadrupolar coupling from three (14)N nuclei. The laboratory rotational spectra provide the basis for future searches for these polar aromatic compounds in interstellar space by radio astronomy.     

Non‐Hydrolyzable RNA–Peptide Conjugates: A Powerful Advance in the Synthesis of Mimics for 3′‐Peptidyl tRNA Termini

Translation of specific small peptides on the ribosome can confer resistance to macrolide antibiotics. To reveal the molecular details of this and related phenomena, stable RNA–peptide conjugates that mimic peptidyl‐tRNA would be desirable, especially for ribosome structural biology. A flexible solid‐phase synthesis strategy now allows efficient access to these highly requested derivatives without restriction on the RNA and peptide sequences.

     

Analytical and preparative separation of PEGylated lysozyme for the characterization of chromatography media

The effect of PEGylation on cation exchange chromatography was studied with poly(ethylene glycol) of different chain lengths (5 kDa, 10 kDa and 30 kDa) using lysozyme as a model system. A stable binding via reduction of a Schiff base was formed during random PEGylation on lysine residues with methoxy-PEG-aldehyde. A purification method for PEGylated proteins using cation exchange chromatography was developed, and different isoforms of mono-PEGylated lysozyme were isolated. TSKgel SP-5PW and Toyopearl GigaCap S-650M showed the best performance of all tested cation exchange resins, and the separation of PEGylated lysozyme could be also scaled up to semi-preparative level. Size-exclusion chromatography, SDS-PAGE and MALDI-TOF mass spectrometry were used for analysis. Separated mono-PEGylated lysozyme of different sizes was used to determine dynamic binding capacities (DBC) and selectivity of cation exchange chromatography resins. An optimization of binding conditions resulted in a more than 20-fold increase of DBC for Toyopearl GigaCap S-650M with 30 kDa mono-PEGylated lysozyme.     

Size and purity of gold nanoparticles changes with different types of thiolate ligands

Gold nanoparticles (Au-NPs) were prepared by a surfactant-free single-phase reduction of hydrogen tetrachloroaurate(III) hydrate in the presence of different organic thiol ligands. Sizes, size distributions, and crystallinity of the Au-NPs were determined by high-resolution transmission electron microscopy and powder X-ray diffraction, whereas thermogravimetric analysis provided information on the organic ligand-to-gold ratios as well as amounts of contaminants. A systematic decrease in size with increasing conical bulk of the thiolate ligand is observed but large size distributions and contamination of the generated Au-NPs prohibit detailed mechanistic studies. A first-generation Fréchet dendron thiol produced the smallest and cleanest Au-NPs of the narrowest size distribution.