Screen-printed electrode-based electrochemical detector coupled with in-situ ionic-liquid-assisted dispersive liquid–liquid microextraction for determination of 2,4,6-trinitrotoluene

A novel method is reported, whereby screen-printed electrodes (SPELs) are combined with dispersive liquid–liquid microextraction. In-situ ionic liquid (IL) formation was used as an extractant phase in the microextraction technique and proved to be a simple, fast and inexpensive analytical method. This approach uses miniaturized systems both in sample preparation and in the detection stage, helping to develop environmentally friendly analytical methods and portable devices to enable rapid and onsite measurement. The microextraction method is based on a simple metathesis reaction, in which a water-immiscible IL (1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [Hmim][NTf₂]) is formed from a water-miscible IL (1-hexyl-3-methylimidazolium chloride, [Hmim][Cl]) and an ion-exchange reagent (lithium bis[(trifluoromethyl)sulfonyl]imide, LiNTf₂) in sample solutions. The explosive 2,4,6-trinitrotoluene (TNT) was used as a model analyte to develop the method. The electrochemical behavior of TNT in [Hmim][NTf₂] has been studied in SPELs. The extraction method was first optimized by use of a two-step multivariate optimization strategy, using Plackett–Burman and central composite designs. The method was then evaluated under optimum conditions and a good level of linearity was obtained, with a correlation coefficient of 0.9990. Limits of detection and quantification were 7 μg L^?1 and 9 μg L^?1, respectively. The repeatability of the proposed method was evaluated at two different spiking levels (20 and 50 μg L^?1), and coefficients of variation of 7 % and 5 % (n?=?5) were obtained. Tap water and industrial wastewater were selected as real-world water samples to assess the applicability of the method.

Paths to synchronization on complex networks

The understanding of emergent collective phenomena in natural and social systems has driven the interest of scientists from different disciplines during decades. Among these phenomena, the synchronization of a set of interacting individuals or units has been intensively studied because of its ubiquity in the natural world. In this Letter, we show how for fixed coupling strengths local patterns of synchronization emerge differently in homogeneous and heterogeneous complex networks, driving the process towards a certain global synchronization degree following different paths. The dependence of the dynamics on the coupling strength and on the topology is unveiled. This study provides a new perspective and tools to understand this emerging phenomena.     

Stability of AgIII towards Halides in Organosilver(III) Complexes

The involvement of silver in two-electron Ag^I/Ag^III processes is currently emerging. However, the range of stability of the required and uncommon Ag^III species is virtually unknown. Here, the stability of Ag^III towards the whole set of halide ligands in the organosilver(III) complex frame [(CF₃)₃AgX]⁻ (X=F, Cl, Br, I, At) is theoretically analyzed. The results obtained depend on a single factor: the nature of X. Even the softest and least electronegative halides (I and At) are found to form reasonably stable Ag^III−X bonds. Our estimates were confirmed by experiment. The whole series of nonradiative halide complexes [PPh₄][(CF₃)₃AgX] (X=F, Cl, Br, I) has been experimentally prepared and all its constituents have been isolated in pure form. The pseudohalides [PPh₄][(CF₃)₃AgCN] and [PPh₄][(CF₃)₃Ag(N₃)] have also been isolated, the latter being the first silver(III) azido complex. Except for the iodo compound, all the crystal and molecular structures have been established by single-crystal X-ray diffraction methods. The decomposition paths of the [(CF₃)₃AgX]⁻ entities at the unimolecular level have been examined in the gas phase by multistage mass spectrometry (MSⁿ). The experimental detection of the two series of mixed complexes [CF₃AgX]⁻ and [FAgX]⁻ arising from the corresponding parent species [(CF₃)₃AgX]⁻ demonstrate that the Ag−X bond is particularly robust. Our experimental observations are rationalized with the aid of theoretical methods. Smooth variation with the electronegativity of X is also observed in the thermolyses of bulk samples. The thermal stability in the solid state gradually decreases from X=F (145 °C, dec.) to X=I (78 °C, dec.) The experimentally established compatibility of Ag^III with the heaviest halides is of particular relevance to silver-mediated or silver-catalyzed processes.     

A generalised model of hydrogen diffusion in metals with multiple trap types

Continuum modelling of hydrogen diffusion in metals, which accounts for both trapping and an imposed force field, is revisited. A generalised model of hydrogen diffusion and trapping is developed as a continuous interpretation of the discrete random-walk theory. A system of nonlinear equations describing the phenomenon of diffusion with multiple types of traps is derived without the assumption of a local equilibrium among hydrogen populations in dissimilar positions. Lattice-trap interchange kinetics can degenerate into local equilibrium as a limit case. Moreover, certain terms in general equations may be negligible in specific situations. By removing these terms, known particularised models of hydrogen diffusion and trapping are recovered. Determining the terms, which are disregarded in reduced models, enables a straightforward assessment of the applicability of these models. The advantages and limitations of particularised models applied to hydrogen embrittlement analyses are discussed.     

Development of a calorimetric sensor for medical application

A calorimetric sensor has been developed for local and direct measurement of calorific dissipations in different parts of the human body. The constructed prototype has a detection surface of 36 cm². In this paper, a deconvolution method is proposed to reconstruct the dissipated power. The advantage of this method is that: to determine the dissipated power, it is not necessary to correct the baselines to calculate either the areas of the calorimetric signal or that of the dissipated power in the temperature control because the proposed method takes into account, apart from the calorimetric signal, the thermostat temperature and the ambient temperature.     

Phosphatidylcholine‐Coated Iron Oxide Nanomicelles for In Vivo Prolonged Circulation Time with an Antibiofouling Protein Corona

We report the synthesis of micellar phosphatidylcholine‐coated superparamagnetic iron oxide nanoparticles as a new long circulation contrast agents for magnetic resonance imaging. Oleic acid‐coated Fe₃O₄ nanoparticles were first prepared through thermal degradation and then encapsulated into small clusters with a phosphatidylcholine coating to obtain hydrophilic nanomicelles. A thorough characterization confirmed the chemical nature of the coating and the excellent colloidal stability of these nanomicelles in aqueous media. Magnetization and relaxivity properties proved their suitability as magnetic resonance imaging (MRI) contrast agent and in vitro cell viability data showed low toxicity. Vascular lifetime and elimination kinetics in the liver were assessed by blood relaxometry and by in vivo MRI in rats and compared with “control” particles prepared with a polyethylene glycol derivative. These micellar particles had a lifetime in blood of more than 10 h, much longer than the control nanoparticles (≈2 h), which is remarkable considering that the coating molecule is a small biocompatible zwitterionic phospholipid. The protein corona was characterized after incubation with rat serum at different times by high‐throughput proteomics, showing a higher proportion of bound apolipoproteins and other dysopsonins for the phosphatidylcholine particles. The antibiofouling properties of this corona and its resistance to the adsorption of proteins corroborate the observed enhanced stability and prolonged systemic circulation.     

Fluorescence of New o‐Carborane Compounds with Different Fluorophores: Can it be Tuned?

Two sets of o‐carborane derivatives incorporating fluorene and anthracene fragments as fluorophore groups have been successfully synthesized and characterized, and their photophysical properties studied. The first set, comprising fluorene‐containing carboranes 6 – 9 , was prepared by catalyzed hydrosilylation reactions of ethynylfluorene with appropriate carboranylsilanes. The compound 1‐[(9,9‐dioctyl‐fluorene‐2‐yl)ethynyl]carborane ( 11 ) was synthesized by the reaction of 9,9‐dioctyl‐2‐ethynylfluorene and decaborane (B₁₀H₁₄). Furthermore, reactions of the lithium salt of 11 with 1 equivalent of 4‐(chloromethyl)styrene or 9‐(chloromethyl)anthracene yielded compounds 12 and 13 . Members of the second set of derivatives, comprising anthracene‐containing carboranes, were synthesized by reactions of monolithium or dilithium salts of 1‐Me‐1,2‐C₂B₁₀H₁₁, 1‐Ph‐1,2‐C₂B₁₀H₁₁, and 1,2‐C₂B₁₀H₁₂ with 1 or 2 equivalents of 9‐(chloromethyl)anthracene, respectively, to produce compounds 14 – 16 . In addition, 2 equivalents of the monolithium salts of 1‐Me‐1,2‐C₂B₁₀H₁₁ (Me‐o‐carborane) and 1‐Ph‐1,2‐C₂B₁₀H₁₁ (Ph‐o‐carborane) were reacted with 9,10‐bis(chloromethyl)anthracene to produce compounds 17 and 18 , respectively. Fluorene derivatives 6 – 9 exhibit moderate fluorescence quantum yields (32–44 %), whereas 11 – 13 , in which the fluorophore is bonded to the C_cluster (C_c), show very low emission intensity (6 %) or complete fluorescence quenching. The anthracenyl derivatives containing the Me‐o‐carborane moiety exhibit notably high fluorescence emissions, with ?_F=82 and 94 %, whereas their Ph‐o‐carborane analogues are not fluorescent at all. For these compounds, we have observed a correlation between the C_c?C_c bond length and the fluorescence intensity in CH₂Cl₂ solution, comparable to that observed for previously reported styrene‐containing carboranes. Thus, our hypothesis is that for systems of this type the fluorescence may be tuned and even predicted by changing the substituent on the adjacent C_c.     

Vinyl Dihydropyrans and Dihydrooxazines: Cyclizations of Catalytic Ruthenium Carbenes Derived from Alkynals and Alkynones

A novel synthesis of 2‐vinyldihydropyrans and dihydro‐1,4‐oxazines (morpholine derivatives) from alkynals and alkynones has been developed. The cyclizations require a mild generation of catalytic ruthenium carbenes from terminal alkynes and (trimethylsilyl)diazomethane followed by trapping with carbonyl nucleophiles. Mechanistic aspects of the new cyclizations are discussed.     

A Carbene‐Rich but Carbonyl‐Poor [Ir6(IMe)8(CO)2H14]2+ Polyhydride Cluster as a Deactivation Product from Catalytic Glycerol Dehydrogenation

The title cluster, a deactivation product in the catalytic dehydrogenation of glycerol, was characterized by XRD, DFT calculations, HRMS, FTIR spectroscopy, and NMR spectroscopy. Experimental/computational studies located the 14 H ligands, and all ¹H and ¹³C{¹H} NMR resonances were assigned. The structure contains an unprecedented Ir₆H₁₄ core with two CO and eight IMe ligands.     

Highly Stable Water‐Soluble Platinum Nanoparticles Stabilized by Hydrophilic N‐Heterocyclic Carbenes

Controlling the synthesis of stable metal nanoparticles in water is a current challenge in nanochemistry. The strategy presented herein uses sulfonated N‐heterocyclic carbene (NHC) ligands to stabilize platinum nanoparticles (PtNPs) in water, under air, for an indefinite time period. The particles were prepared by thermal decomposition of a preformed molecular Pt complex containing the NHC ligand and were then purified by dialysis and characterized by TEM, high‐resolution TEM, and spectroscopic techniques. Solid‐state NMR studies showed coordination of the carbene ligands to the nanoparticle surface and allowed the determination of a ¹³C–¹⁹⁵Pt coupling constant for the first time in a nanosystem (940 Hz). Additionally, in one case a novel structure was formed in which platinum(II) NHC complexes form a second coordination sphere around the nanoparticle.