Stereoselective synthesis of unnatural α-amino acid derivatives through photoredox catalysis

A protocol for stereoselective C-radical addition to a chiral glyoxylate-derived N-sulfinyl imine was developed through visible light-promoted photoredox catalysis, providing a convenient method for the synthesis of unnatural α-amino acids. The developed protocol allows the use of ubiquitous carboxylic acids as radical precursors without prior derivatization. The protocol utilizes near-stoichiometric amounts of the imine and the acid radical precursor in combination with a catalytic amount of an organic acridinium-based photocatalyst. Alternative mechanisms for the developed transformation are discussed and corroborated by experimental and computational studies.

A protocol for stereoselective C-radical addition to a chiral glyoxylate-derived N-sulfinyl imine was developed through visible light-promoted photoredox catalysis, providing a convenient method for the synthesis of unnatural α-amino acids.     

Simultaneous determination of N-butylscopolamine and oxazepam in pharmaceutical formulations by first-order digital derivative spectrophotometry

A simple method has been developed for the simultaneous determination of N-butylscopolamine bromide and oxazepam in pharmaceutical formulations using first-order digital derivative spectrophotometry. Acetonitrile was selected as the solvent in which both compounds showed well-defined bands. Both analytes showed good stability in this solvent when solutions of the analytes were exposed to light and temperatures between 20 degrees and 80 degrees C. The simultaneous determination of both drugs was performed by the zero-crossing method at 226.0 and 257.0 nm for N-butylscopolamine and oxazepam, respectively. The linear range of determination was found to be 2.5 x 10(-7) to 8.0 x 10(-5) mol/L for N-butylscopolamine and 7.1 x 10(-8) to 8.0 x 10(-5) mol/L for oxazepam. A very good level of repeatability (relative standard deviation) of 0.2% was observed for N-butylscopolamine and oxazepam. The ingredients commonly found in pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in pharmaceutical formulations (capsules).     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Indene and pseudoazulene discotic liquid crystals: a synthetic and structural study

Several new liquid-crystalline indene and pseudoazulene systems are reported. These molecules give rise to either columnar hexagonal mesophases and/or columnar plastic phases. The unique nature of these compounds stems from their non-classical discotic structure. Although the molecules have rigid aromatic cores, they lack terminal tails and instead the polarizable atoms (S, halogens) or polar groups (CN, CO) act as unusual soft parts. On the basis of many structurally related materials, we conclude that for this type of compound molecular stacking in the solid state is a prerequisite for the appearance of a columnar mesophase, although other intermolecular interactions within the layers are also important in establishing liquid-crystalline order. The behavior reported for these mesomorphic molecules opens up new possibilities in the search for related molecular interactions that might be useful for the construction of supramolecular architectures with particular properties.     

Synthesis and molecular structure of methyl 4-O-methyl-alpha-D-glucopyranuronate

A method for the preparation of methyl 4-O-methyl-alpha-D-glucopyranuronate and its single crystal X-ray structure determination are reported. The molecule adopts an almost ideal (4)C1 ((degree)C3) conformation.     

Electrochemical Synthesis of MII Complexes with a Schiff Base containing an Amido Group. Crystal Structure of a Cobalt(II) Complex with a Reorganised Ligand

M(HL)(H₂O)_n complexes have been obtained by the electrochemical reaction of Fe, Co, Ni, Cu, Zn and Cd anodes with the potentially pentadentate and trianionic asymmetrical Schiff base 3‐aza‐N‐{2‐[1‐aza‐2‐(5‐nitro‐2‐hydroxylphenyl)‐vinyl]phenyl}‐4‐(5‐nitro‐2‐hydroxyphenyl)but‐3‐enamide (H₃L), containing a hard amido donor atom. The complexes have been characterized by elemental analysis, mass spectrometry, IR and ¹H NMR spectroscopies, magnetic measurements and molar conductivities. Co(HL)(H₂O) ( 2 ) has been found to rearrange in DMF solution into a crystallographically solved octahedral complex, CoL¹(H₂O)₂ ( 7 ) [where H₂L¹ is the symmetrical Schiff base ligand N,N′‐(1,2‐phenylene)‐bis(5‐nitro‐3‐hydroxysalicylidenimine)]. A hydrolysis mechanism is discussed to explain this rearrangement.     

Thermal Analysis of Acrylonitrile Polymerization and Cyclization in the Presence of N,N-Dimethylformamide

This paper examines the polymerization of acrylonitrile to poly(acrylonitrile)(PAN), and its cyclization, in bulk form and using N,N-dimethylformamide (DMF) as solvent in which both monomer and polymer are soluble. Thermal analysis of the resultant products after polymerization has been performed by DSC and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). Scanning electron microscopy has been used to study the morphology of the resultant products and after thermal treatments. The DSC thermal curve of PAN-DMF sample is quite different from the PAN bulk sample, showing a single sharp exothermic peak associated with nitrile group polymerization (cyclization) of PAN at lower temperature (240°C) than that of bulk PAN sample (314°C). Cyclization of PAN was confirmed by IR spectroscopy. It was found that the amide molecules are difficult to eliminate completely in the product obtained after the polymerization reaction, even after prolonged heating at 110°C, and remain occluded. The formation of a complex by dipolar bonding is also possible and it is discussed. It is concluded that the amount of heat evolved as well as the temperature interval over which it is released are influenced by the chemical processing of PAN when using DMF as solvent of both monomer and polymer. Pyrolysis of these PAN samples revealed the release of occluded molecules of DMF, and several compounds containing nitrogen produced from the thermal degradation processes. All these results are interesting to know the chemical processing of carbon fibres and activated carbon fibres from PAN modified precursors.This revised version was published online in November 2005 with corrections to the Cover Date.     

Synthesis of new guanidine derivatives from 2′,3′,4′,9′-tetrahydrospiro[piperidine-4,1′-[1H]pyrido[3,4-b]indole]

The reaction of the isothiourea derivative 2 with methylaminc or pyrrolidine resulted in guanidines 3a-3b . Using hydrazine under the same conditions the tetrazole derivative 4 was obtained. On reacting 2 with piperidine, morpholine, methylhydrazine, phenylhydrazine, hydroxylamine or sodium hydroxide, cycliza-tion took place leading to the novel 4-cyanimino-1,2,3,4,6,7,12,12b-octahydro-3,12b-ethanopyrim-ido[1′,6′:1,2]pyrido[3,4-b]indole ( 5 ). Some structural aspects of 5 and other model compounds were analysed mainly by ¹³C nmr spectroscopy.     

The observation of a large gauche preference when 2-fluoroethylamine and 2-fluoroethanol become protonated

The energies of the gauche and anti conformers of 2-fluoroethylamine, 2-fluoroethanol and their protonated analogues are calculated using density functional theory. Unlike the non protonated systems, the protonated systems show a strong gauche effect where the C-F and the C-(+)NH(3) or C-F and C-(+)OH(2) bonds are gauche rather than anti to each other. Single crystal X-ray diffraction studies of 2-fluoroethylammonium compounds identify the same conformational preference.     

Unexpected valence bond isomerization of [1,2,4]triazolo[3,4-c][1,2,4]benzotriazines under flash vacuum pyrolytic (fvp) conditions

Flash vacuum pyrolysis (fvp) of some substituted [1,2,4]triazolo[3,4-c][1,2,4]benzotriazine derivatives (1a-d) has been studied between 450 and 600 °C. The only transformation observed up to 525 °C was the unexpected valence bond isomerization of the angularly fused starting compounds to the isomeric linearly fused [1,2,4]triazolo[4,3-b][1,2,4]benzotriazine derivatives (9a-d), whereas at higher temperatures fragmentation products such as aromatic nitriles were also formed. Kinetic measurements revealed negative entropies of activation in the isomerization process, which suggest a concerted ring closure reaction to an intermediate antiaromatic diazirine. Reversibiblity of the title isomerization reaction was also proved by FVP experiments.