Evaluation of the drag force by integrating the energy dissipation rate in stokes flow for 2D domains using the FEM

The total drag force on the surface of a body, which is the sum of the form drag and the skin friction drag in a 2D domain, is numerically evaluated by integrating the energy dissipation rate in the whole domain for an incompressible Stokes fluid. The finite element method is used to calculate both the energy dissipation rate in the whole domain as well as the drag on the boundary of the body. The evaluation of the drag and the energy dissipation rate are post-processing operations which are carried out after the velocity field and the pressure field for the flow over a particular profile have been obtained. The results obtained for the flow over three different but constant area profiles—a circle, an ellipse and a cross-section of a prolate spheroid—with uniform inlet velocity are presented and it is shown that the total drag force times the velocity is equal to the total energy dissipation rate in the entire finite flow domain. Hence, by calculating the energy dissipation rate in the domain with unit velocity specified at the far-field boundary enclosing the domain, the drag force on the boundary of the body can be obtained.     

TDPAC study in ZnTiF6·6H2O between room temperature and 1273 K

Using the time differential perturbed angular correlation technique, the hyperfine interactions as titanium sites in ZnTiF6·6H₂O and its decomposition products were determined between room temperature (300 K) and 1273 K. The different steps in the decomposition pattern were identified and a simple model is given for it.     

On the evaluation of the nonisothermal kinetic parameters of (GeS2)0.3(Sb2S3)0.7 crystallization using the IKP method

The isoconversional method suggested by Friedman and the invariant kinetic parameters method (IKP) were used in order to examine the kinetics of the nonisothermal crystallization of (GeS₂)_0.3(Sb₂S₃)_0.7. The objective of the paper is to show the usefulness of the IKP method both for determining the activation parameters as well as the model of the investigated process. It was shown that the kinetic triplet [(E, A, f(α), where E is the activation energy, A is the preexponential factor, and f(α) is the differential function of conversion], which results through the application of the IKP method, depends on the set of kinetic models considered. For different sets of kinetic models, proportional values of f(α) are obtained. A criterion for the selection of this set, the use of which lead to the true kinetic triplet corresponding to the analyzed process (E = 163.2 kJ mol^?1; A = 2.47 × 10¹² min^?1 and the Avrami‐Erofeev model, A_m, for m = 2.5–2.6 was suggested. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 309–315, 2004     

Click chemistry in materials synthesis. III. Metal‐adhesive polymers from Cu(I)‐catalyzed azide–alkyne cycloaddition

1,2,3‐Triazole‐based polymers generated from the Cu(I)‐catalyzed cycloaddition between multivalent azides and acetylenes are effective adhesive materials for metal surfaces. The adhesive capacities of candidate mixtures of azide and alkyne components were measured by a modified peel test, using a customized adhesive tester. A particularly effective tetravalent alkyne and trivalent azide combination was identified, giving exceptional strength that matches or exceeds the best commercial formulations. The addition of Cu catalyst was found to be important for the synthesis of stronger adhesive polymers when cured at room temperature. Heating also accelerated curing rates, but the maximum adhesive strengths achieved at both room temperature and high temperature were the same, suggesting that crosslinking reaches the same advanced point in all cases. Polytriazoles also form adhesives to aluminum, but copper is bound more effectively, presumably because active Cu(I) ions may be leached from the surface to promote crosslinking and adhesion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5182–5189, 2007     

Enthalpies of sorption of linear hydrocarbons (C2–C8) and chloroderivatives of methane and ethylene on the surface of hydrotalcite

Differential molar adsorption enthalpies (DMAE) were determined by gas chromatographic measurements of specific retention volume of vapors on the surface of two forms of Mg–Al hydrotalcite. A linear dependence of the DMAE on the number of the carbon atoms in hydrocarbons was observed for both form of hydrotalcite. The dependence of the differential molar adsorption enthalpies on the number of chlorine atoms in organic molecules is discussed. A linear dependence of DMAE on the molecular weight of chloroderivatives of methane and ethylene on the basic form in an order monochloromethane < dichloromethane < trichloromethane or vinylidene chloride < 1,1-dichloroethylene < trichloroethylene was found.     

<Superscript>40</Superscript>K activities and potassium concentrations in tobacco samples of Mexican cigarettes

Nine brands of tobacco cigarettes manufactured and distributed in the Mexican market were analyzed by γ-spectrometry to certify their non-artificial radioactive contamination. Since natural occurring radioactive materials (NORM) ⁴⁰K, ²³²Th, ²³⁵U, and ²³⁹U (and decay products from the latter three nuclides) are the main sources for human radiation exposure, the aim of this work was to determine the activity of ⁴⁰K and potassium concentration. Averages of ⁴⁰K and potassium concentration were of 1.29±0.18 Bq·g⁻¹, and 4.0±0.57%. The annual dose equivalents to the whole body from ingestion and inhalation of 26 Bq ⁴⁰K were 0.23 μSv and 15.8 μSv, respectively. The corresponding 50 years committed dose equivalents was 0.23 μSv. The total committed dose to the lungs due to inhalation of ⁴⁰K in tobacco was 16 μSv. Potassium concentrations obtained in this work were in the same range of those obtained by INAA, so showing that the used technique is acute, reproducible, and accessible to laboratories equipped with low background scintillation detectors.     

Difference schemes on uniform grids performed by general discrete operators

Our aim is to set the foundations of a discrete vectorial calculus on uniform n-dimensional grids, that can be easily reformulated on general irregular grids. As a key tool we first introduce the notion of tangent space to any grid node. Then we define the concepts of vector field, field of matrices and inner products on the space of grid functions and on the space of vector fields, mimicking the continuous setting. This allows us to obtain the discrete analogous of the basic first order differential operators, gradient and divergence, whose composition define the fundamental second order difference operator. As an application, we show that all difference schemes, with constant coefficients, for first and second order differential operators with constant coefficients can be seen as difference operators of the form for suitable choices of q, and  . In addition, we characterize special properties of the difference scheme, such as consistency, symmetry and positivity in terms of q, and  .     

Asymmetric synthesis of 6-(2′,3′,4′,5′,6′-pentafluorophenyl)-δ-lactones via “allyl”boranes: application for the synthesis of fluorinated analog of key pharmacophore of statin drugs

Asymmetric “allyl”boration of pentafluorobenzaldehyde with various α-pinene based “allyl”boranes provides homoallylic alcohols in high de and ee; the alcohols have been converted into δ-lactones via acryloylation, ring-closing metathesis and hydrogenation. Pentafluorophenyl analog of key pharmacophore of statin drugs has been synthesized using diastereoselective epoxidation and regioselective reduction as key steps.     

L'intégration graphique des équations différentielles ordinaires

In the period which precedes the appearance of computers, needs in calculation of the scientists and engineers led to an important development of graphic methods of integration. To contribute to the study of this little known phenomenon, the article presents techniques and instruments used for the graphic integration of ordinary differential equations, and looks for their historic origins by going back to the beginning of calculus: processes of geometric calculation by the polygonal method or the method of radius of curvature, use of tractional motion for the conception of integraphs, reduction to graphic quadratures in finite or infinite number.