Synthesis, structures, and magnetic properties of face-sharing heterodinuclear Ni(II)-Ln(III) (Ln = Eu, Gd, Tb, Dy) complexes

Heterodinuclear [(Ni (II)L)Ln (III)(hfac) 2(EtOH)] (H 3L = 1,1,1-tris[(salicylideneamino)methyl]ethane; Ln = Eu, Gd, Tb, and Dy; hfac = hexafluoroacetylacetonate) complexes ( 1.Ln) were prepared by treating [Ni(H 1.5L)]Cl 0.5 ( 1) with [Ln(hfac) 3(H 2O) 2] and triethylamine in ethanol (1:1:1). All 1.Ln complexes ( 1.Eu, 1.Gd, 1.Tb, and 1.Dy) crystallized in the triclinic space group P1 (No. 2) with Z = 2 with very similar structures. Each complex is a face-sharing dinuclear molecule. The Ni (II) ion is coordinated by the L (3-) ligand in a N 3O 3 coordination sphere, and the three phenolate oxygen atoms coordinate to an Ln (III) ion as bridging atoms. The Ln (III) ion is eight-coordinate, with four oxygen atoms of two hfac (-)'s, three phenolate oxygen atoms of L (3-), and one ethanol oxygen atom coordinated. Temperature-dependent magnetic susceptibility and field-dependent magnetization measurements showed a ferromagnetic interaction between Ni (II) and Gd (III) in 1.Gd. The Ni (II)-Ln (III) magnetic interactions in 1.Eu, 1.Tb, and 1.Dy were evaluated by comparing their magnetic susceptibilities with those of the isostructural Zn (II)-Ln (III) complexes, [(ZnL)Ln(hfac) 2(EtOH)] ( 2.Ln) containing a diamagnetic Zn (II) ion. A ferromagnetic interaction was indicated in 1.Tb and 1.Dy, while the interaction between Ni (II) and Eu (III) was negligible in 1.Eu. The magnetic behaviors of 1.Dy and 2.Dy were analyzed theoretically to give insight into the sublevel structures of the Dy (III) ion and its coupling with Ni (II). Frequency dependence in the ac susceptibility signals was observed in 1.Dy.     

Computational study of the aminolysis of anhydrides: effect of the catalysis to the reaction of succinic anhydride with methylamine in gas phase and nonpolar solution

Different possible pathways of the aminolysis reaction of succinic anhydride were investigated by applying high level electronic structure theory, examining the general base catalysis by amine and the general acid catalysis by acetic acid, and studying the effect of solvent. The density functional theory at the B3LYP/6-31G(d) and B3LYP/6-311++G(d,p) levels was employed to investigate the reaction pathways for the aminolysis reaction between succinic anhydride and methylamine. The single point ab initio calculations were based on the second-order M?ller-Plesset perturbation theory (MP2) with 6-31G(d) and 6-311++G(d,p) basis sets and CCSD(T)/6-31G(d) level calculations for geometries optimized at the B3LYP/6-311++G(d,p) level of theory. A detailed analysis of the atomic movements during the process of concerted aminolysis was further obtained by intrinsic reaction coordinate calculations. Solvent effects were assessed by the polarized continuum model method. The results show that the concerted mechanism of noncatalyzed aminolysis has distinctly lower activation energy compared with the addition/elimination stepwise mechanism. In the case of the process catalyzed by a second methylamine molecule, asynchronous proton transfer takes place, while the transition vectors of the acid-catalyzed transition states correspond to the simultaneous motion of protons. The most favorable pathway of the reaction was found through the bifunctional acid catalyzed stepwise mechanism that involves formation of eight-membered rings in the transition state structures. The difference between the activation barriers for the two mechanisms averages 2 kcal/mol at various levels of theory.     

Theoretical studies on the mechanism of C-P bond cleavage of a model alpha-aminophosphonate in acidic condition

Various reaction paths of the P-C bond cleavage of alpha-aminophosphonates in acidic media, resulting in the derivatives of phosphonic acid, has been investigated using density functional level of theories in the gas phase as well as in aqueous medium. Dimethyl (alpha-anilinobenzyl)phosphonate has been used as the model molecule and our investigation confirms a three steps process including protonation, P-C bond cleavage, and the transformation of the products from the final transition state (imine cation and H-phosphonate) through hydrolysis. The most favorable reaction path starts from the amino group protonation, followed by a proton transfer through N-H...O(P) hydrogen bond, and the P-C bond cleavage from the resulting protonated structure. Explicit inclusion of water molecules indicated that two waters are needed for the P-C bond cleavage, and the calculated mechanistic paths in this hydrated model are similar to those of the aqueous solvation model.     

Platinum(IV) complexes with purine analogs. Studies of molecular structure and antiproliferative activity in vitro

A series of tetrachloride platinum(IV) compounds of the general formulae PtCl₄L₂, where L = 1,2,4-triazolo[1,5-a]pyrimidine (tp) (1), 5,7-dimethyl-1,2,4-triazolo[1,5-a]pyrimidine (dmtp) (2), 5,7-ditertbutyl-1,2,4-triazolo[1,5-a]pyrimidine (dbtp) (3) and 5-methyl-1,2,4-triazolo[1,5-a]pyrimidin-7(4H)-one (HmtpO) (4) have been prepared and characterized by thermal analysis, ¹H, ¹³C, ¹⁵N, ¹⁹⁵Pt NMR and IR spectroscopy. Spectral data suggest that the triazolopyrimidines act as a monodentate ligand via the nitrogen atom N(3). The preliminary assessments of antitumor properties of the four complexes were evaluated as in vitro antiproliferative activity against three cell lines: HL-60 human acute promyelocytic leukemia, SW707 rectal adenocarcinoma and HCV29T bladder cancer. PtCl₄(dbtp)₂ exhibits high cytotoxic activity against all human cell lines, whereas the other complexes are only moderately active.     

Anti-Stokes Yb3+ emission--valuable structure information in spectra of rare earth compounds measured with FT-Raman spectrometers

Raman spectroscopy is a powerful and simple method which proved to be very useful in studies of solids. The most widely used Raman spectrometers are FT-Raman instruments with YAG:Nd(3+) laser as an excitation source. However, in the case of samples containing rare earth elements, the quality of FT-Raman spectra is often low due to strong fluorescence effects. We show that, in such cases, anti-Stokes part of the Raman spectra often contains strong, well resolved bands identified as multiphonon-assisted emission bands of Yb(3+) present as an impurity. We show on several examples that analysis of these bands may provide useful structure information, similar to that obtained by "Eu structure probe" method in optical spectroscopy. The Yb(3+) emission can be also measured using standard luminescence detection systems. However, the application of FT-Raman system allows one to obtain good quality spectra in a much cheaper, easier and faster way (in times as short as a few seconds). Moreover, high-sensitivity of FT-Raman spectrometers allows to detect even very small amounts of Yb(3+) impurity.     

Theoretical study of interaction of urate with li(+), na(+), k(+), be(2+), mg(2+), and ca(2+) metal cations

The geometries and energetics of complexes of Li(+), Na(+), K(+), Be(2+), Mg(2+), and Ca(2+)metal cations with different possible uric acid anions (urate) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d,p) basis set. Complexes of urate with Mg(2+), and Ca(2+)metal cations were also optimized at the MP2/6-31+G(d) level. Single point energy calculations were performed at the MP2/6-311++G(d,p) level. The interactions of the metal cations at different nucleophilic sites of various possible urate were considered. It was revealed that metal cations would interact with urate in a bi-coordinate manner. In the gas phase, the most preferred position for the interaction of Li(+), Na(+), and K(+) cations is between the N(3) and O(2) sites, while all divalent cations Be(2+), Mg(2+), and Ca(2+) prefer binding between the N(7) and O(6) sites of the corresponding urate. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi's polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between urate and the metal cations. It was revealed that aqueous solvation would have significant effect on the relative stability of complexes obtained by the interaction of urate with Mg(2+) and Ca(2+)cations. Consequently, several complexes were found to exist in the water solution. The effect of metal cations on different NH and CO stretching vibrational modes of uric acid has also been discussed.     

Soft-templating synthesis and adsorption properties of mesoporous carbons with embedded silver nanoparticles

Mesoporous carbons containing silver nanoparticles have been successfully synthesized under acidic conditions by employing resorcinol and formaldehyde as carbon precursors and triblock copolymer EO₁₀₁PO₅₆EO₁₀₁ (Lutrol F127) as a soft template. Silver nanoparticles of ∼90 nm were added to the synthesis mixture to achieve 10 wt% and 20 wt% of Ag loading in the carbon. Also, tetraethyl orthosilicate (TEOS) was introduced to the system in order to improve adsorption properties of the silver-carbon composites and to reinforce its structure. The resulting carbons with incorporated silver nanoparticles featured high surface areas, large total pore volumes and primary mesopores in the range between ∼6–7 nm.     

Synthesis and characterisation of PEG-peptide surfaces for proteolytic enzyme detection

Peptide surfaces were obtained by the covalent immobilisation of fluorescently labelled pentapeptides carboxyfluorescein–glycine–arginine–methionine–leucine–glycine, either directly or through a poly(ethylene glycol) (PEG) linker on modified silicon wafers. Each step during the preparation of the peptide surfaces was confirmed by several surface characterisation techniques. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy were used to determine the surface composition, the wafers philicity was measured by contact angle and atomic force microscopy was used to investigate the surface morphology. Exposure of the peptide surfaces to trypsin resulted in the release of a fluorescently labelled peptide product, which allowed the kinetics of the enzymatic reaction to be followed with the aid of fluorescence spectroscopy. The electrospray ionisation mass spectrometry analysis of the post-digestion solution confirmed that the pentapeptides attached to the solid support undergo specific trypsin hydrolysis at the C-terminus of the arginine residues. Detailed surface analyses before and after the enzyme action was performed using ToF-SIMS. Because of the limited accessibility of the short peptide directly attached to the surface, a quantitative yield of enzymatic hydrolysis was observed only in case when the peptide was bound through the PEG linker. The insertion of the PEG linker increased the number of immobilised peptides and the rate of enzymatic digestion which consequently improved the quality of the enzyme assays. The described approach may be used for different peptide sequences designed for other proteases.

Influence of tin on the oxidation of methanol on a platinum electrode

The influence of adsorbed tin and tin(IV) ions on the oxidation of methanol chemisorbed species as well as the methanol from the bulk of the solution was studied on a Pt electrode by voltammetric and radiometric methods. It was found that tin is not adsorbed as an ad-atom but rather as a divalent ion. Enhancement of the electrocatalytic oxidation of chemisorbed species derived from methanol was observed only in the potential range from 0.4 to 0.8 V. The influence of some factors on the electrocatalytic properties of platinum is discussed.     

Theoretical studies on interactions between low energy electrons and protein-DNA fragments: valence anions of AT-amino acids side chain complexes

Electron attachment to trimeric complexes that mimic most frequent hydrogen bonding interactions between an amino acid side chain (AASC) and the Watson-Crick (WC) 9-methyladenine-1-methylthymine (MAMT) base pair has been studied at the B3LYP/6-31++G(d,p) level of theory. Although the neutral trimers will not occur in the gas phase due to unfavorable free energy of stabilization (G(stab)) they should form a protein-DNA complex where entropy changes related to formation of such a complex will more than balance its disadvantageous G(stab). The most stable neutrals possess an identical pattern of hydrogen bonds (HBs). In addition, the proton-acceptor (N7) and proton-donor (N10) atoms of adenine involved in those HBs are located in the main groove of DNA. All neutral structures support the adiabatically stable valence anions in which the excess electron is localized on a π* orbital of thymine. The vertical detachment energies (VDEs) of anions corresponding to the most stable neutrals are substantially smaller than that of the isolated WC MAMT base pair. Hence, electron transfer from the anionic thymine to the phosphate group and as a consequence formation of a single strand break (SSB) should proceed more efficiently in a protein-dsDNA complex than in the naked dsDNA as far as electron attachment to thymine is concerned.