Construction of multiporphyrin arrays using ruthenium and rhodium coordination to phosphines

The synthesis of linear multiporphyrin arrays with mono- and bisphosphine-substituted porphyrins as ligand donors and ruthenium(II) or rhodium(III) porphyrins as ligand acceptors is described. With appropriate amounts of the building blocks mixed, linear dimeric and trimeric arrays have been synthesized and analyzed by (1)H NMR and (31)P NMR spectroscopy. The Ru/Rh acceptor porphyrins can be located either at the periphery or in the center of the array. Likewise, the monophosphine porphyrins can be positioned at the periphery, thus allowing a high degree of freedom in the overall composition of the arrays. This way, both donor and acceptor porphyrins can act as chain extenders or terminators. One of the trimeric complexes with two nickel and one ruthenium porphyrin has also been analyzed by X-ray crystallography. Attempts have also been made to synthesize higher order arrays by mixing appropriate amounts of the porphyrins; however, from the NMR data it cannot be concluded if monodisperse five, seven, or nine porphyrin arrays are present or if the solutions are composed of a statistical mixture of smaller and larger arrays.     

Absolute rate constants for the quenching of reactive excited states by melanin and related 5,6-dihydroxyindole metabolites: implications for their antioxidant activity

The triplet-excited state of benzophenone and the singlet-excited state of 2,3-diazabicyclo[2.2.2]oct-2-ene (Fluorazophore-P) have been employed as kinetic probes to obtain information on the antioxidant activity of the skin and eye pigment melanin and its biogenetic precursors 5,6-dihydroxyindole (DHI) and 5,6-dihydroxyindole-2-carboxylic acid (DHICA). The excited states were generated by the laser-flash photolysis technique and their reaction kinetics was examined by time-resolved transient absorption or fluorescence spectroscopy, respectively. The reaction between triplet benzophenone and DHI produced with unit efficiency the corresponding 6O-centered semiquinone radical, which was characterized by its characteristic transient absorption. The quenching rate constants for DHI (3.1-8.4 x 10(9) M-1 s-1) and DHICA (3.3-5.5 x 10(9) M-1 s-1) were near the diffusion-controlled limit, indicating excellent antioxidant properties. Kinetic solvent effects were observed. The reactivity of synthetic melanin, assessed through the quenching rate constant of Fluorazophore-P and normalized to the number of monomer units, was more than one order of magnitude lower (2.7 x 10(8) M-1 s-1) than that of its precursors. The trend of the quenching rate constants, i.e. DHI > DHICA approximately alpha-tocopherol > melanin, along with the preferential solubility of DHICA in aqueous environments, serves to account for several experimental results from biochemical studies on the inhibition of lipid peroxidation by these natural antioxidants.     

Role of Cell Surface Lipopolysaccharides in Escherichia coli K12 adhesion and transport

The influence of bacterial surface lipopolysaccharides (LPS) on cell transport and adhesion has been examined by use of three mutants of Escherichia coli K12 with well-characterized LPS of different lengths and molecular composition. Two experimental techniques, a packed-bed column and a radial stagnation point flow system, were employed to investigate bacterial adhesion kinetics onto quartz surfaces over a wide range of solution ionic strengths. Although the two systems capture distinct deposition (adhesion) mechanisms because of their different hydrodynamics, similar deposition kinetics trends were observed for each bacterial strain. Bacterial deposition rates were directly related to the electrostatic double layer interaction between the bacteria and quartz surfaces, in qualitative agreement with classic Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. However, DLVO theory does not fully explain the deposition behavior for the bacterial strain with the lengthy, uncharged O-antigen portion of the LPS. Neither the length nor the charge characteristics of the LPS molecule directly correlated to deposition kinetics, suggesting a complex combination of cell surface charge heterogeneity and LPS composition controls the bacterial adhesive characteristics. It is further suggested that bacterial deposition behavior is determined by the combined influence of DLVO interactions, LPS-associated chemical interactions, and the hydrodynamics of the deposition system.     

A sensitive solid-phase fluoroimmunoassay for detection of opiates in urine

An automated flow fluorometer designed for kinetic binding analysis was adapted to develop a solid-phase competitive fluoroimmunoassay for urinalysis of opiates. The solid phase consisted of polymer beads coated with commercial monoclonal antibodies (MAbs) raised against morphine. Fluorescein-conjugated morphine (FL-MOR) was used as the fluorescein-labeled hapten. The dissociation equilibrium constant (K _D ) for the binding of FL-MOR to the anti-MOR MAb was 0.23 nM. The binding of FL-MOR to the anti-MOR MAb reached steady state within minutes and was displaced effectively by morphine and other opiates. Morphine-3-glucuronide (M3G), the major urinary metabolite of heroin and morphine, competed effectively with FL-MOR in a concentration-dependent manner for binding to the antimorphine MAb and was therefore used to construct the calibration curve. The sensitivity of the assay was 0.2 ng/mL for M3G. The assay was effective at concentrations of M3G from 0.2 to 50 ng/mL, with an IC₅₀ of 2 ng/mL. Other opiates and heroin metabolites that showed >50% crossreactivity when present at 1 μg/mL included codeine, morphine-6-glucuronide, and oxycodone. Methadone showed very low crossreactivity (<5%), which is a benefit for testing in patients being treated for opiate addictions. The high sensitivity of the assay and the relatively high cutoff value for positive opiate tests allows very small sample volumes (e.g., in saliva or sweat) to be analyzed. A double-blind comparison using 205 clinical urine samples showed good agreement between this single-step competitive assay and a commercially performed enzyme multiplied immunoassay technique for the detection of opiates and benzoylecgonine (a metabolite of cocaine).     

Ascorbate-induced oxidation of formate by peroxodisulfate: product yields,kinetics and mechanism

The slow reaction between peroxodisulfate and formate is significantly accelerated by ascorbate at room temperature. The products of this induced oxidation, CO₂ and oxalate (C₂O^2– ₄), were analyzed by several methods and the kinetics of this reaction were measured. The overall mechanism involves free radical species. Ascorbate reacts with peroxodisulfate to initiate production of the sulfate radical ion (SO^– ₄), which reacts with formate to produce carbon dioxide radical ion (CO^– ₂) and sulfate. The carbon dioxide radical reacts with peroxodisulfate to form CO₂ or self-combines to form oxalate. Competition occurring between these two processes determines the overall fate of the carbon dioxide radical species. As pH decreases, protonation of the carbon dioxide radical ion tends to favor production of CO₂.     

Substituent effects and the mechanism of alkene metathesis catalyzed by ruthenium dichloride catalysts

Density functional theory calculations are reported concerning the dissociative mechanism for alkene metathesis by ruthenium dichloride catalysts, including both bisphosphine and diaminocarbene/phosphine complexes. The calculations use a hierarchy of models, ranging from [(L)(PH(3))Ru(Cl)(2)(CH(2))](L=PH(3) or diaminocarbene) through the larger [(L)(PMe(3))Ru(Cl)(2)(CHPh)] to the "real"[(L)(PCy(3))Ru(Cl)(2)(CHPh)]. Calculations show that the rate-limiting step for metathesis is either ring closing from an alkene complex to form a ruthena-cyclobutane, or ring-opening of the latter intermediate to form an isomeric alkene complex. The higher efficiency of the diaminocarbene based catalysts is due to the stabilization of the formal +iv oxidation state of the ruthenium centre in the metallacycle. This effect is partly masked in the smaller model systems due to a previously unnoticed stereoelectronic effect. The calculations do not reproduce the experimental observation whereby the initiation step, phosphine dissociation, is more energetically demanding and hence slower for the diaminocarbene-containing catalyst system than for the bisphosphine. Further calculations on the corresponding bond energies using a variety of DFT and hybrid DFT/molecular mechanics methods all find instead a larger phosphine dissociation energy for the bisphosphine catalyst. This reversed order of binding energies would in fact be the one expected based on the stronger trans influence of the diaminocarbene ligand. The discrepancy with experiment is small and could have a number of causes which are discussed here.     

Expedient Diels-Alder assembly of 4-aryl-4-phenylsulfonyl cyclohexanones

The efficient preparation of 4-aryl-4-phenylsulfonyl cyclohexanones, containing a quaternary sulfone-bearing carbon centre, is described. Their synthesis proceeds in 38-78% overall yield by way of three steps: (i) sulfinate alkylation; (ii) methylenation; and (iii) regioselective Diels-Alder condensation with 2-trimethylsiloxybutadiene. The scope and limitations of the one-pot Mannich-type methylenation described were examined.     

Synthesis of the 4-methyl-1,2-oxazetidine-4-carboxylic acid moiety of the originally proposed halipeptin A and B structures

O-Alkylation of N-hydroxycarbamate 6 with iodo ester 5 affords 15, which was elaborated to mesylate 4. Intramolecular N-alkylation affords methyl N-Boc-4-methyl-1,2-oxazetidine-4-carboxylate (3). The geminal coupling constant of the methylene protons is 8.5 Hz, which is much smaller than the 12.0 Hz reported for halipeptins A and B. This confirms that the halipeptins do not contain an oxazetidinecarboxylic acid as originally proposed in structure 1, but a thiazoline as in the revised structure 2. The unusual O-alkylation of 5 probably proceeds by an electron transfer mechanism.