Atomic structure of the Si(5 5 12)-2 × 1 surface

Based on the results of scanning tunneling microscopy studies of the reconstructed Si(5 5 12)-2 × 1 surface, its atomic structure has been found. It turns out that Si(5 5 12)-2 × 1 consists of four one-dimensional structures: honeycomb (H) chain, π-bonded H′ (π) chain, dimer-adatom (D/A) row, and tetramer (T) row. Its period is composed of three subunits, i.e., (i) (3 3 7) unit with a D/A row [D(3 3 7)], (ii) (3 3 7) unit with a T row [T(3 3 7)], and (iii) (2 2 5) unit with both a D/A and a T row. Two kinds of adjacent subunits, T(3 3 7)/D(3 3 7) and D(3 3 7)/(2 2 5), are divided by H chains with 2× periodicity due to buckling, while one kind of adjacent subunits, T(3 3 7)/(2 2 5), is divided by a π chain with 1× periodicity. Two chain structures, H and π chains, commute with each other depending upon the external stresses perpendicular to the chain, which is the same for two row structures, D/A and T rows. It can be concluded that the wide and planar reconstruction of Si(5 5 12)-2 × 1 is originates from the stress balance among two commutable chains and two commutable rows.     

1.6 μm band double pass fiber Raman amplifiers using Raman fiber oscillator

We propose double pass fiber Raman amplifier schemes based on Raman fiber oscillator in order to amplify optical signal with wavelengths from 1610 to 1650 nm efficiently. We experimentally demonstrate that the proposed double pass amplifier scheme has enhanced gain characteristics compared to a conventional single pass scheme. We also demonstrate a scheme for the proposed double pass amplifier to have small gain variation over the wavelength range by using two fiber Bragg gratings with different center wavelengths.     

Fabrication of electrode Pt nanotubes for semiconductor capacitors

Template-wetting process was used to fabricate Pt electrode nanotubes for the further application in 3D nanotube capacitors. Anodic alumina oxide (AAO) was used as a template, which can be fabricated by means of two-step anodization process. After the wetting process, released Pt nanotubes have been obtained by selective etching of the template using KOH solution. Pt nanotubes formation and tube walls morphology were investigated by FE-SEM technique. Furnace annealing (FA) effects at temperatures ranging from 200 to 600 °C with 100^oC step on nucleation and crystal growth condition of Pt nanotubes have been examined. Crystallization of the Pt nanotube inside the template has been examined by step-by-step annealing at different temperatures, and confirmed by XRD.     

Plasmon coupling of R6G-linked gold nanoparticle assemblies for surface-enhanced Raman spectroscopy

This paper presents the study of surface-enhanced Raman scattering (SERS) for Rhodamine 6G (R6G)-linked gold (Au) assemblies. The nano-assemblies fabricated with Au nanoparticles, having diameters (D) of ～5–40 nm, possessed interparticle gaps of ～0.03–0.2D, respectively. The R6G-linked Au assemblies displayed weak spectral shifts of localized surface plasmon resonance (LSPR) mode at shorter wavelength region and large fractional red-shifts Δλ ～ 0.07–0.47λ_o at longer wavelength region. The resonant spectral coupling of the nano-assemblies LSPR mode at the longer wavelength region and the optical excitation at ～785 nm, in addition to the highly localized hot spots, could support the large SERS enhancement of R6G-linked Au assemblies.     

Preparation and characterization of crosslinked cellulose/sulfosuccinic acid membranes as proton conducting electrolytes

A series of crosslinked polymer electrolyte membranes were prepared by blending cellulose and sulfosuccinic acid (SA) for fuel cell applications. The crosslinking reaction of membranes occurred via the esterification between –OH of cellulose and –COOH of SA, as confirmed by FT-IR spectroscopy. Both the ion exchange capacity and the proton conductivity increased in proportion to the increase of SA concentrations due to the increasing portion of charged groups in the membrane. In contrast, the water uptake linearly increased up to 25 wt.% of SA concentration, above which it decreased abruptly. The maximum behavior of water uptake may be a result of competitive effect between the increasing number of ionic sites and the increasing degree of crosslinking with the SA concentrations. Wide angle X-ray scattering also showed that the crystalline structures of cellulose disappeared upon the introduction of SA. The mechanical properties of cellulose/SA membranes, i.e., tensile strength at break and Young’s modulus, showed a maximum at 15 wt.% of SA, as revealed by universal testing machine. These membranes exhibited good thermal stability up to 250 °C, as revealed by thermal gravimetric analysis.     

Surface structure of low-coveraged Cs on Si(0 0 1)-() system

Alkali metals (AM) on semiconductors have been investigated as a simple model system for the metal-semiconductor interfaces due to their simple electronic structures. Especially, cesium (Cs) on Si(0 0 1) surface has been studied with various experimental techniques. In this study, we investigated the atomic structure of initial Cs adsorption on Si(0 0 1)-(2×1) surface using coaxial impact collision ion scattering spectroscopy. When Cs atoms are adsorbed on Si(0 0 1)-(2×1) up to 0.2 ML at room temperature, the initial adsorption site is on-top T3 site with poor periodicity and the length of Si dimer is reserved as in the clean Si(0 0 1) surface. It is also found that Cs atoms adsorbed on Si(0 0 1) surface with a height of 2.83±0.05 Å from the second layer of Si(0 0 1) surface.     

Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications

Branched sulfonated poly(ether ketone sulfone)s (Br‐SPEKS) were prepared with bisphenol A, bis(4‐fluorophenyl)sulfone, 3,3′‐disodiumsulfonyl‐4,4′‐difluorobenzophenone, and THPE (1,1,1‐tris‐p‐hydroxyphenylethane), respectively, at 180 °C using potassium carbonate in NMP (N‐methylpyrrolidinone). THPE, as a branching agent, was used with 0.4 mol % of bisphenol A to synthesize branched copolymers. Copolymers containing 10–50 mol % disulfonated units were cast from dimethylsulfoxide solutions to form films. Linear sulfonated poly(ether ketone sulfone)s (SPEKS) were also synthesized without THPE. The films were converted from the salt to acid forms with dilute hydrochloric acid. A series of copolymers were studied by Fourier transform infrared, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. The ion‐exchange capacity (IEC), a measure of proton conductivity, was evaluated. The synthesized Br‐SPEKS and SPEKS membranes exhibit conductivities (25 °C) from 1.04 × 10^?3 to 4.32 × 10^?3 S/cm, water swell from 20.18 to 62.35%, IEC from 0.24 to 0.83 mequiv/g, and methanol diffusion coefficients from 3.2 × 10^?7 to 4.7 × 10^?7 cm²/S at 25 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1792–1799, 2008