Supercritical fluid extraction of the fluoroquinolones norfloxacin and ofloxacin from orally treated-chicken breast muscles

Supercritical fluid extraction (SFE) of the fluoroquinolones norfloxacin and ofloxacin from chicken breast muscles was examined. A liquid chromatography with fluorescence detection was used for the determination of the fluoroquinolones. Extraction conditions of the SFE were optimized by determining the extraction parameters to achieve a sufficiently high recovery of each fluoroquinolone in fortified-muscle samples. Recovery values for the extraction of the fluoroquinolones using the SFE ranged from 70 to 87%. Chickens were treated orally with each fluoroquinolone and their muscles were extracted at set time intervals for time-course determination of the fluoroquinolones in chickens. The SFE combined with liquid chromatographic analysis showed that the concentrations of the fluoroquinolones decreased gradually with time in the chicken muscles after oral treatment, giving a concentration less than 5 ng/ml in 120 h. No further sample cleanup procedures were required after the SFE. These results suggest that SFE method is an extraction method for the determination of norfloxacin and ofloxacin in chicken muscle.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

High-Throughput Analysis of Sofalcone in Human Plasma by Use of Automated 96-Well Protein Precipitation and LC-MS-MS

A sensitive and selective method for the determination of sofalcone in human plasma was established by use of protein precipitation and liquid chromatography-tandem mass spectrometry. Plasma samples were transferred into 96-well plate using an automated sample handling system and spiked with 10 L of 2 g mL^–1 internal standard solution (d₃-sofalcone). 0.5 mL of acetonitrile was added to the 96-well plate and the plasma samples were then vortexed for 30 sec. After centrifugation, the supernatant was transferred into another 96-well plate and completely evaporated at 40 °C under a stream of nitrogen. The dry residue was reconstituted with mobile phase. All sample transfer and protein precipitation was automated through the application of both the PerkinElmer MultiPROBE II HT and TOMTEC Quadra 96 workstation. The limit of quantitation of sofalcone was 2 ng mL^–1 using a sample volume of 0.2 mL for the analysis. The reproducibility of the method was evaluated by analyzing five samples at nine quality control (QC) levels over the nominal concentration range from 2 ng mL^–1 to 1000 ng mL^–1. Validation of the method showed that the assay has good precision and accuracy. Sofalcone and internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 451 and 454, and both gave a corresponding product ion at m/z 315. The high sample throughput of the method has been successfully applied to a pharmacokinetic study of sofalcone in human plasma.     

Remarkably Efficient Photocurrent Generation Based on a [60]Fullerene–Triosmium Cluster/Zn–Porphyrin/Boron–Dipyrrin Triad SAM

A new artificial photosynthetic triad array, a [60]fullerene–triosmium cluster/zinc–porphyrin/boron–dipyrrin complex ( 1 , Os₃C₆₀/ZnP/Bodipy), has been prepared by decarbonylation of Os₃(CO)₈(CN(CH₂)₃Si(OEt)₃)(μ₃‐η²:η²:η²‐C₆₀) ( 6 ) with Me₃NO/MeCN and subsequent reaction with the isocyanide ligand CNZnP/Bodipy ( 5 ) containing zinc porphyrin (ZnP) and boron dipyrrin (Bodipy) moieties. Triad 1 has been characterized by various spectroscopic methods (MS, NMR, IR, UV/Vis, photoluminescence, and transient absorption spectroscopy). The electrochemical properties of 1 in chlorobenzene (CB) have been examined by cyclic voltammetry; the general feature of the cyclic voltammogram of 1 is nine reversible one‐electron redox couples, that is, the sum of those of 5 and 6 . DFT has been applied to study the molecular and electronic structures of 1 . On the basis of fluorescence‐lifetime measurements and transient absorption spectroscopic data, 1 undergoes an efficient energy transfer from Bodipy to ZnP and a fast electron transfer from ZnP to C₆₀; the detailed kinetics involved in both events have been elucidated. The SAM of triad 1 ( 1 /ITO; ITO=indium–tin oxide) has been prepared by immersion of an ITO electrode in a CB solution of 1 and diazabicyclo‐octane (2:1 equiv), and characterized by UV/Vis absorption spectroscopy, water contact angle, X‐ray photoelectron spectroscopy, and cyclic voltammetry. The photoelectrochemical properties of 1 /ITO have been investigated by a standard three‐electrode system in the presence of an ascorbic acid sacrificial electron donor. The quantum yield of the photoelectrochemical cell has been estimated to be 29 % based on the number of photons absorbed by the chromophores. Our triad 1 is unique when compared to previously reported photoinduced electron‐transfer arrays, in that C₆₀ is linked by π bonding with little perturbation of the C₆₀ electron delocalization.     

Hypergolic N,N‐Dimethylhydrazinium Ionic Liquids

N,N‐Dimethylhydrazinium dicyanamide and nitrocyanamide ionic liquids (ILs) were prepared by quaterization of N,N‐dimethylhydrazine with alkyl halides followed by metathesis reactions with silver dicyanamide or silver nitrocyanamide. The key physicochemical properties, such as melting point and decomposition temperatures, density, viscosity, heat of formation, detonation pressure and velocity, and specific impulse were measured/calculated. The impact of anions and alkyl‐substituted cations on these properties is demonstrated. Droplet tests with white‐fuming nitric acid (WFNA) as an oxidizer were utilized to show that the 14 new N,N‐dimethylhydrazinium salts are hypergolic with ignition delay (ID) times ranging from 22 to 1642 ms, thereby suggesting that some may have potential as bipropellants.     

Metal-directed supramolecular assembly of metal(II) benzoates (M = Co,Ni, Cu,Zn, Mn,and Cd) with 4,4′-bipyridine: Effects of metal coordination modes and novel catalytic activities

Six polymeric metal(II)-benzoate complexes of formula [Co₂(O₂CPh)₄(4,4′-bpy)₂]_n (1-Co), [Ni(O₂CPh)₄(H₂O)₂(4,4′-bpy)]_n (2-Ni), [Cu₂(O₂CPh)₄(4,4′-bpy)]_n (3-Cu), [Zn₂(O₂CPh)₂(OH)₂(4,4′-bpy)₂]_n (4-Zn), [Zn₃(O₂CPh)₄(μ-OH)₂(4,4′-bpy)₂]_n (5-Zn), and [Cd₂(O₂CPh)₄(4,4′-bpy)₂]_n (6-Cd) have been synthesized and characterized (4,4′-bpy = 4,4′-bipyridine). 1-Co and 6-Cd show ladder-type double chains, 2-Ni does a helical structure, 3-Cu does a one-dimensional chain containing paddle-wheel units, 4-Zn does a zigzag chain, and 5-Zn does two-dimensional sheets. Since different structures provide different coordination geometry of each metal ion, it is clear that selection of appropriate metal ions can control the coordination geometry of each metal ion to form different crystal structures. Reactivity study of the compounds 1–7 for the transesterification of a variety of esters has shown that 4-Zn and 5-Zn are very efficient and the best among them. The catalyst 6-Cd containing Cd ion, well known as an inert metal ion for the ligand substitution, also catalyzed efficiently the transesterification of a variety of esters, and its reactivity is comparable to 4-Zn and 5-Zn. Moreover, the redox-active metal-containing polymers, 1-Co, 3-Cu, and 7-Mn, have shown efficient catalytic reactivities for the transesterification reactions, while 2-Ni has displayed a very slow conversion. The reactivities of the compounds used in this study are in the order of 5-Zn > 4-Zn > 6-Cd > 7-Mn ∼ 3-Cu > 1-Co > 2-Ni, indicating that the non-redox metal-containing compounds (5-Zn, 4-Zn, and 6-Cd) show better activity than the redox-active metal-containing compounds (7-Mn, 3-Cu, 1-Co, and 2-Ni). These results suggest that it is possible to tune the catalytic activities by changing from Zn to those metals such as Cd, a kinetically inert metal, or Cu, Mn, and Co, the redox-active metals.     

Energetic Ethylene‐ and Propylene‐Bridged Bis(nitroiminotetrazolate) Salts

High energy density materials with ethylene‐ and propylene bis(5‐nitroiminotetrazolate) as the anions are reported; all salts were fully characterized by IR, and ¹H, ¹³C, and ¹⁵N NMR spectroscopy as well as elemental analyses. In addition, the heats of formation (ΔH_f) and the detonation pressures (P) and velocities (D) were calculated.

     

Synthesis of azidochloromethane and azidobromomethane

By treatment of tris(azidomethyl)amine with dry hydrogen halide, azidochloromethane and azidobromomethane were prepared. The former product, which is more stable than the latter, was isolated as a colorless liquid. The desired azidohalomethanes are intermediates in the nucleophilic substitution of dihalomethanes to generate diazidomethane but could not be detected in this transformation.     

Closed-packed lattice model for polymer solution systems considering the chain length dependence effect: Correlating LLE,VLE, and gel swelling behaviors using identical interaction energy parameters

We propose a new Helmholtz energy of mixing equation following the original Flory–Huggins (F–H) closed-packed lattice model. Also, to overcome F–H mean-field approximation, we introduce new universal constants to consider chain length dependence of polymer in solvent and consider specific interactions to describe strongly interacting polymer systems. Our proposed model successfully describes liquid–liquid equilibria (LLE) for binary polymer–solvent systems using identical interaction parameters which do not depend on the polymer molecular weight. We also describe vapor–liquid equilibria (VLE) for polymer/solvent systems and swelling equilibria of thermosensitive hydrogel systems using the same energy parameters obtained from LLE calculations.     

Hydrogen bonding nature between calix[6]arene and piperidine/triethylamine

We investigated the binding nature of the 1,2,3-alternate calix[6]arene with one piperidine, two piperidines, and two triethyl amines with a special emphasis on the hydrogen bonding networks by density functional theory calculations. The 1,2,3-alternate calix[6]arene strongly binds with piperidines and triethylamines at two different binding sites, exo and endo sites. In the two binding sites, the hydrogen bonding nature shows a characteristic difference. In the exo site, there formed only one hydrogen bond, while in the endo site, two hydrogen bonds except for the triethylamine. The proton transfer within the hydrogen bonding and the hydrogen bonding types, normal hydrogen bonding (NHB), short strong hydrogen bond (SSHB), and low barrier hydrogen bonding (LBHB), will be discussed in detail.