Double-quantum filtered STMAS

Double-quantum and double-quantum-filtered satellite-transition magic-angle spinning (STMAS) experiments are proposed. The experiments efficiently convert satellite-transition coherence from single- to double-quantum with a central-transition selective pi-pulse. The conversion allows the selection of double-quantum coherence transfer pathways with phase cycling that completely filters out unwanted diagonal and outer satellite-transition peaks. Both experiments are demonstrated with RbNO3 and AlPO4-berlinite as model compounds for obtaining clean STMAS spectra of spins 3/2 and 5/2, respectively.     

Comparison of activities of homogeneous Ti-based catalysts in the presence of methylaluminoxane (MAO) for synthesis of syndiotactic polystyrene by UV/visible spectroscopic study

The catalytic activities in syndiospecific polymerization of styrene in hydrocarbon using homogeneous Ti-based catalysts in the presence of methylaluminoxane (MAO) were investigated through UV/visible spectroscopic analysis. A strong UV absorption band of CpTiCl₃, itself, incipiently appeared at λ_max = 400 nm in toluene, followed by a bathochromic shift with its remarkable decrease by the addition of MAO. The absorption band intensity at λ_max = 400 nm arising from delocalization of π-electrons on the cyclopentadienyl ring decreased by methylation in the presence of MAO with regard to the mechanism for production of an active center (“cation-like”), for example, the change of the ionic nature. The intensity decrease at λ_max = 400 nm was suppressed over 2000 of the [Al]/[Ti] ratio. In the case of Ti(OC₄H₉)₄ having a σ-ligand, new and broad UV absorption bands were developed at λ_max = 340 nm and 410 nm in the presence of MAO in contrast with the CpTiCl₃/MAO system. Comparison between the relative absorption intensities at λ_max = 340 nm and 410 nm led to the determination of a maximum catalytic activity of Ti(OC₄H₉)₄ in the presence of MAO related to the polymerization yield. The maximum polymerization yield was observed with regard to the relative maximum value of the absorption intensity at λ_max = 410 nm with the [Al]/[Ti] ratio (500). From observation for polymorphism of the final products via differential scanning calorimetric analysis (DSC), the thermally unstable β-form seemed to be produced by the CpTiCl₃/MAO system independent of the MAO concentration, the Ti(OC₄H₉)₄/MAO system produced a thermally stable α-form in the low MAO concentration (up to 100 of the [Al]/[Ti] ratio), and a mixture of α- and/or β-forms over 200 of the [Al]/[Ti] ratio under our experimental conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1733–1741, 1998     

Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes

The most important variable affecting the yield in the coupling reactions of polymeric organolithium compounds with chlorosilane compounds has been investigated through size-exclusion chromatographic (SEC) analysis. The coupling reaction of poly(styryl)lithium with dichlorodimethylsilane as a silane-coupling agent provided 44 wt % of the coupling yield. The coupling yield, depending on the chain end reactivity of active polymers, was not greatly affected. The addition of a Lewis base such as N,N,N′,N′-tetramethylethylenediamine (TMEDA) even after complete polymerization of the dienes in hydrocarbon seems to affect the coupling reaction, resulting in decreasing the yield. The 1,2- or 3,4-enchain contents in the polydiene backbones affected the reduction of the linking efficiency in the coupling of the poly(dienyl)lithiums with chlorosilanes as the linking agent. The linking yields of the active polymers including over 75 mol % of 1,2- or 3,4-enchainment on the polydiene segment were below 20 wt %. The linking yields exhibited a dependence not only on the steric requirement of the chain end, but also the microstructure of the polydiene segment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1743–1753, 1998     

Liquid-phase dehydration of sorbitol under microwave irradiation in the presence of acidic resin catalysts

Liquid-phase dehydration of sorbitol has been investigated in wide reaction conditions especially under microwave irradiation in the presence of acidic resin catalysts. From the selectivity for sorbitan and isosorbide, it can be understood that the dehydration is a consecutive reaction (sorbitol to sorbitan, and finally to isosorbide) and that the sorbitan is an intermediate of the dehydration. By using microwave irradiation, the dehydration can be accelerated by around 20?C34 times compared with the rate by conventional electric heating at the same temperature, or the reaction temperature can be decreased by around 40 °C for the comparable conversion in a similar reaction time. However, the microwaves do not have noticeable effects on the selectivity for isosorbide or sorbitan. The accelerated dehydration under microwaves is mainly due to decreased activation energy.     

Remarkable Change in Fluorescence Emission of Poly(diphenylacetylene) Film via in situ Desilylation Reaction: Correlation with Variations in Microporous Structure,Chain Conformation,and Lamellar Layer Distance

Fluorescence (FL) emission properties, microporous structures, energy‐minimized chain conformations, and lamellar layer structures of the silicon‐containing poly(diphenylacetylene) derivative of p‐PTMSDPA before and after desilylation were investigated. The nitrogen‐adsorption isotherms of p‐PTMSDPA film before and after desilylation were typical of type I, indicating microporous structures. The BET surface area and pore volume of the p‐PTMSDPA film were significantly reduced after the desilylation reaction, simultaneously, its FL emission intensity remarkably decreased. The theoretical calculation on both model compounds of p‐PTMSDPA and its desilylated polymer, PDPA, showed a remarkable difference in chain conformation: The side phenyl rings of p‐PTMSDPA are discontinuously arranged in a zig‐zag pattern, while the PDPA is continuously coiled in a helical manner. The lamellar layer distance (LLD) in the p‐PTMSDPA film significantly decreased after the desilylation reaction.

     

Rheology of hydrophobically modified polyacrylamide-co-poly(acrylic acid) on addition of surfactant and variation of solution pH

Constant shear and shear dependent viscosity measurements are reported in aqueous systems of co- and terpolymers of acrylamide (AM), N-n-alkylacrylamide (C10, C12, and C14 alkyl groups), and acrylic acid (AA) with added anionic surfactant sodium dodecyl sulfate (SDS). The results are presented as three-dimensional plots of viscosity vs surfactant concentration and pH at constant shear rate or viscosity vs shear rate and surfactant concentration at constant pH. For terpolymers incorporating AA, a strong viscosity maximum is observed at intermediate pH values (pH 4-6) where the AA groups are partially ionized and at SDS concentrations close to the critical micelle concentration. At high pH, all AA incorporating terpolymer solutions with SDS are strongly shear thinning, but at pH 3-4 the systems of terpolymers with SDS are strongly shear thickening at low shear, followed by a shear-thinning region at high shear. These results are explained in terms of surfactant-mediated network formation with polymer coil expansion and hydrogen bonding between partially ionized AA groups as additional factors.     

Metal-directed supramolecular assembly of metal(II) benzoates (M = Co,Ni, Cu,Zn, Mn,and Cd) with 4,4′-bipyridine: Effects of metal coordination modes and novel catalytic activities

Six polymeric metal(II)-benzoate complexes of formula [Co₂(O₂CPh)₄(4,4′-bpy)₂]_n (1-Co), [Ni(O₂CPh)₄(H₂O)₂(4,4′-bpy)]_n (2-Ni), [Cu₂(O₂CPh)₄(4,4′-bpy)]_n (3-Cu), [Zn₂(O₂CPh)₂(OH)₂(4,4′-bpy)₂]_n (4-Zn), [Zn₃(O₂CPh)₄(μ-OH)₂(4,4′-bpy)₂]_n (5-Zn), and [Cd₂(O₂CPh)₄(4,4′-bpy)₂]_n (6-Cd) have been synthesized and characterized (4,4′-bpy = 4,4′-bipyridine). 1-Co and 6-Cd show ladder-type double chains, 2-Ni does a helical structure, 3-Cu does a one-dimensional chain containing paddle-wheel units, 4-Zn does a zigzag chain, and 5-Zn does two-dimensional sheets. Since different structures provide different coordination geometry of each metal ion, it is clear that selection of appropriate metal ions can control the coordination geometry of each metal ion to form different crystal structures. Reactivity study of the compounds 1–7 for the transesterification of a variety of esters has shown that 4-Zn and 5-Zn are very efficient and the best among them. The catalyst 6-Cd containing Cd ion, well known as an inert metal ion for the ligand substitution, also catalyzed efficiently the transesterification of a variety of esters, and its reactivity is comparable to 4-Zn and 5-Zn. Moreover, the redox-active metal-containing polymers, 1-Co, 3-Cu, and 7-Mn, have shown efficient catalytic reactivities for the transesterification reactions, while 2-Ni has displayed a very slow conversion. The reactivities of the compounds used in this study are in the order of 5-Zn > 4-Zn > 6-Cd > 7-Mn ∼ 3-Cu > 1-Co > 2-Ni, indicating that the non-redox metal-containing compounds (5-Zn, 4-Zn, and 6-Cd) show better activity than the redox-active metal-containing compounds (7-Mn, 3-Cu, 1-Co, and 2-Ni). These results suggest that it is possible to tune the catalytic activities by changing from Zn to those metals such as Cd, a kinetically inert metal, or Cu, Mn, and Co, the redox-active metals.     

Loniceroside C,an antiinflammatory saponin from Lonicera japonica

A new triterpenoid saponin, loniceroside C was isolated from the aerial parts of Lonicera japonica. Its structure was established to be 3-O-beta-D-glucopyranosyl hederagenin 28-O-alpha-L-rhamnopyranosyl (1-->2)-[beta-D-xylopyranosyl(1-->6)]-beta-D-glucopyranosyl ester by spectroscopic techniques and chemical transformations. Loniceroside C showed in vivo antiinflammatory activity against mouse ear edema provoked by croton oil.     

Synthesis of 2,3-disubstituted benzofurans on solid-support

A library of 2,3-disubstituted benzofuran scaffold was developed by using intramolecular Wittig olefination and Friedel-Crafts acylation.