Characterization of mitochondria isolated from normal and ischemic hearts in rats utilizing atomic force microscopy

Mitochondria play critical roles in both the life and the death of cardiac myocytes. Various factors, such as the loss of ATP synthesis and increase of ATP hydrolysis, impairment in ionic homeostasis, formation of reactive oxygen species (ROS), and release of proapoptotic proteins are related to the generation of irreversible damage. It has been proposed that the release of cytochrome c is caused by a swelling of the mitochondrial matrix triggered by the apoptotic stimuli. However, there is a controversy about whether or not the mitochondria, indeed, swell during apoptosis. The major advantages of atomic force microscopy (AFM) over conventional optical and electron microscopes for bio-imaging include the fact that no special coating and vacuum are required and imaging can be done in all environments--air, vacuum or aqueous conditions. In addition, AFM force-distance curve measurements have become a fundamental tool in the fields of surface chemistry, biochemistry, and material science. In this study, we used AFM to observe the morphological and property changes in heart mitochondria that were isolated from a rat myocardial infarction model. From the shape parameters of the mitochondria in the AFM topographic image, it seemed that myocardial infarction caused the mitochondrial swelling. Also, the results of force-distance measurements showed that the adhesion force of heart mitochondria was significantly decreased by myocardial in infarction. Therefore, we suggested that myocardial infarction might be the cause of mitochondrial swelling and the changes in outer membrane of heart mitochondria.     

Measurement of the tau lepton mass and an upper limit on the mass difference between tau+ and tau-

The mass of the tau lepton has been measured in the decay mode tau-->3pinutau using a pseudomass technique. The result obtained from 414 fb-1 of data collected with the Belle detector is Mtau=[1776.61+/-0.13(stat)+/-0.35(sys)] MeV/c2. The upper limit on the relative mass difference between positive and negative tau leptons is |Mtau+-Mtau-|/Mtau<2.8 x 10-4 at 90% confidence level.     

Enhanced stability of 1D molecular lines on the H-terminated Si(001) surface

We present a facile method for the self-directed growth of 1D molecular lines on the H-terminated Si(001) surface. Instead of a previously employed single dangling bond, we here employ a single H-free Si dimer as a reaction site, resulting in an enhanced stability of the radical intermediate for the O-phthalaldehyde (OP) molecule containing two carbonyl groups. This radical intermediate easily abstracts two H atoms from a neighboring Si dimer, thereby allowing the chain reaction for a 1D molecular line. Such a fabricated OP line will be stable at higher temperatures compared to previously reported alkene lines because of its enhanced stability.     

Complete synchronization of Kuramoto oscillators with finite inertia

We present an approach based on Gronwall’s inequalities for the asymptotic complete phase-frequency synchronization of Kuramoto oscillators with finite inertia. For given finite inertia and coupling strength, we present admissible classes of initial configurations and natural frequency distributions, which lead to the complete phase-frequency synchronization asymptotically. For this, we explicitly identify invariant regions for the Kuramoto flow, and derive second-order Gronwall’s inequalities for the evolution of phase and frequency diameters. Our detailed time-decay estimates for phase and frequency diameters are independent of the number of oscillators. We also compare our analytical results with numerical simulations.     

Synthesis and optical properties of 10 mol% Ce, 5 mol% Tb co-doped KGdF4 and GdF3 submicro/nanocrystals

By controlling the pH values of prepared solutions, the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped KGdF₄ (synthesized with pH = 3) and the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped GdF₃ (synthesized with pH = 1) submicro/nanocrystals have been synthesized based on a citric acid assisted hydrothermal method. For comparison, the samples synthesized by co-precipitation method (without hydrothermal treatment) with pH = 3 and 1 were also collected. The X-ray diffraction data illustrate that the hydrothermal treated KGdF₄ sample crystallizes in the cubic phase and the GdF₃ sample crystallizes in the orthorhombic phase. However, the samples synthesized by co-precipitation method with pH = 3 and 1 are both cubic phase KGdF₄. The field emission scanning electron microscopy images suggest that the hydrothermal treated KGdF₄ submicro/nanocrystals present spherical morphology and the GdF₃ submicrocrystals are rhombic-shaped. And the photoluminescence excitation and emission spectra as well as the luminescent dynamic curves demonstrate the difference in optical properties of the two hydrothermal treated samples.     

Structural studies of AgSbTe2 under pressure: Experimental and theoretical analyses

The crystal structure of AgSbTe₂ has been refined using first-principles calculations, from which the ordering of the cations, Ag and Sb, was confirmed. The spontaneous formation of two (D4 and L1₁) phases at ambient and elevated pressure was demonstrated theoretically. The compound was also prepared and its high-pressure structural deformation sequence, ranging from ambient to 50.9 GPa, was observed with synchrotron radiation at room temperature. The compound underwent a pressure-induced amorphization (PIA) at 24.6 GPa and then started recrystallizing at 49.2 GPa. The bulk modulus (B₀) and pressure derivative of the bulk modulus (B_p) were determined experimentally to be 56.3 ± 5.1 GPa and 4.3 ± 0.8, respectively. We suggest that large displacements of Te atoms to Ag vacancy positions are responsible for PIA and the recrystallization.     

Bipolar-power-transistor-based limiter for high frequency ultrasound imaging systems

High performance limiters are described in this paper for applications in high frequency ultrasound imaging systems. Limiters protect the ultrasound receiver from the high voltage (HV) spikes produced by the transmitter. We present a new bipolar power transistor (BPT) configuration and compare its design and performance to a diode limiter used in traditional ultrasound research and one commercially available limiter. Limiter performance depends greatly on the insertion loss (IL), total harmonic distortion (THD) and response time (RT), each of which will be evaluated in all the limiters. The results indicated that, compared with commercial limiter, BPT-based limiter had less IL (−7.7 dB), THD (−74.6 dB) and lower RT (43 ns) at 100 MHz. To evaluate the capability of these limiters, they were connected to a 100 MHz single element transducer and a two-way pulse-echo test was performed. It was found that the −6 dB bandwidth and sensitivity of the transducer using BPT-based limiter were better than those of the commercial limiter by 22% and 140%, respectively. Compared to the commercial limiter, BPT-based limiter is shown to be capable of minimizing signal attenuation, RT and THD at high frequencies and is thus suited for high frequency ultrasound applications.     

The Smart 2-(2-Fluorobenzoyl)-N-(2-Methoxyphenyl)Hydrazinecarbothioamide Functionalized as Ni(II) Sensor in Micromolar Concentration Level and its Application in Live Cell Imaging

In recent years, fluorescent probes for the detection of environmentally and biologically important metal cations have received extensive attention for designing and development of fluorescent chemosensors. Herein, we report the photophysical results of 2-(2-fluorobenzoyl)-N-(2-methoxyphenyl) hydrazinecarbothioamide (4) functionalized as Ni (II) sensor in micromolar concentration level. Through fluorescence titration at 488 nm, we were confirmed that ligand 4 showed the remarkable emission by complexation between 4 and Ni (II) while it appeared no emission in case of the competitive ions (Cr³⁺, Fe²⁺, Co²⁺, Ba²⁺, Cu²⁺, Ca²⁺, Na⁺, K⁺, Cu⁺, Cs⁺). Furthermore, ligand 4 exhibited no toxicity with precise cell permeability toward normal living cells using L929 cell lines in bio imaging experiment investigated through confocal fluorescence microscope. The non-toxic behavior of ligand 4 (assessed by MTT assay) and its ability to track the Ni²⁺ in living cells suggest its possibility to use in biological system as nickel sensor.