Effects of edge screens on the absorption of blocks of theatre chairs

This paper reports new measurement results investigating the use of screens around samples of theatre chairs to minimize edge effects when measuring theatre chair absorption in reverberation chambers. The absorption measurements included both full scale and scale model measurements in reverberation chambers and a model recital hall. The use of screens has been proposed to better approximate the sound absorption of the larger blocks of chairs in auditoria. The method of measuring the absorption of blocks of chairs with screens around their edges and located in the corner of a reverberation chamber did not give results indicative of the values obtained for larger areas in auditoria. The addition of screens around samples of chairs did not eliminate the variation of absorption coefficients with perimeter/area ratio. The results of extrapolations from measurements of blocks of screened chairs to infinite samples gave lower absorption coefficients than found for blocks of unscreened chairs. The absorption of chairs in large performance halls can best be predicted using the P/A method to extrapolate from reverberation chamber measurements of smaller samples of unscreened chairs, with a range of P/A values, to the larger samples and lower P/A ratios of blocks of chairs typical of performance spaces.     

Photoluminescence properties of a new Eu2+-activated CaLaGa3S7 yellowish-green phosphor for white LED applications

A thiogallate chalcogenide phosphor CaLaGa₃S₇:Eu²⁺ was synthesized by a solid-state reaction at 950 °C in a H₂S atmosphere. The photoluminescence excitation,emission spectra, concentration quenching, fluorescence lifetime, and thermal quenching process of the phosphor were investigated in detail. It was found that the synthesized phosphor emitted intense and broadband yellowish-green light with a peak at 554 nm. Thus, the proposed phosphor is suitable for the development of blue or near UV LED. The critical dopant concentration of Eu²⁺ (R_c=15 Å) per unit formula was found to be 0.15 mol. At room temperature, the fluorescence lifetime of Eu²⁺ in CaLaGa₃S₇ was found to be 0.216 μs. The activation energy for thermal quenching was 0.29 eV. The chromaticity coordinates of our phosphor is very close in color to Y₃Al₅O₁₂:Ce³⁺. Therefore, CaLaGa₃S₇:Eu²⁺ can be a good alternative as a yellowish-green phosphor and can be used for white light generation in phosphor-converted LEDs.     

Effect of strain and nonparabolicity on interband transition energies of InAs/GaAs coupled double quantum dots

Strained potential profiles and electronic subband energies of InAs/GaAs coupled double quantum dots (DQDs) were calculated by using a three-dimensional finite-difference method (FDM) taking into account shape-based strain and nonparabolic effects. The interband transition energies from the ground electronic subband to the ground heavy-hole band (E₁-HH₁) in the InAs/GaAs DQDs, as determined from the FDM calculations taking into account strain and nonparabolic effects, were in reasonable agreement with the experimental peaks corresponding to the (E₁-HH₁) interband transition energies at several temperatures, as determined from the temperature-dependent photoluminescence spectra.     

Anomalous Hall effect in sputter-deposited CoxTi1−xO2–δ films

Hall effect measurements were performed on epitaxial Co_xTi_1−xO_2–δ thin films grown on (0 0 1) LaAlO₃ by reactive RF magnetron co-sputter deposition. Magnetization measurements reveal ferromagnetic behavior in M–H loop at room temperature for Co_xTi_1−xO_2–δ thin films for which x?0.02. An anomalous Hall effect was observed for Co_0.10Ti_0.90O_2−δ films grown with the partial pressure of water P(H₂O)=4×10⁻⁴ Torr or less. These films exhibit a positive ordinary Hall coefficient and a positive magnetoresistance. X-ray diffraction on films grown under these conditions shows evidence for Ti_nO_2n−1 phase due to the deficiency of oxygen. In contrast, Hall measurements taken for undoped and Co-doped TiO₂ thin films grown under more oxidizing conditions show only the ordinary Hall effect with a negative Hall coefficient consistent with n-type conduction. For these films, the magnetoresistance was positive and increased monotonically with increasing magnetic field. The results suggest that Co-doped Ti_nO_2n−1 may be a dilute magnetic semiconducting oxide for which the carriers couple to the spin polarization.     

Observation of the D1(2420)-->Dpi + pi- decays

We report on the first observation of D0/1(2420)-->D0pi- pi+ and D+/1(2420-->D+ pi- pi+ decays (where the contribution from the dominant known D1-->D*pi decay mode is excluded) in the B- -->D0/1pi-) and (-)B0-->D+/1pi- decays, respectively. The observation is based on 15.2 x 10(7) B(-)B events collected with the Belle detector at the KEKB collider. We also set 90% confidence level upper limits for the branching fractions of the four following decays: B- -->D0/1pi-, D01-->D(*0)pi- pi+, (-)B0-->D+/1pi-, D+/1-->D(*+) pi- pi+, B- -->D(*0)2(2460)pi-, D(*0)2 -->D(*0) pi- pi+, (-)B0-->D(*+)2(2460)pi-, D(*+)2-->D(*+)pi- pi+.     

Observation of a near-threshold omegaJ/psi mass enhancement in exclusive B-->KomegaJ/psi decays

We report the observation of a near-threshold enhancement in the omegaJ/psi invariant mass distribution for exclusive B-->KomegaJ/psi decays. The results are obtained from a 253 fb(-1) data sample that contains 275 x 10(6) BB pairs that were collected near the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric energy e(+)e(-) collider. The statistical significance of the omegaJ/psi mass enhancement is estimated to be greater than 8sigma.     

Search for D0-D0 mixing in D0 --> K+ pi(-) decays and measurement of the doubly-Cabibbo-suppressed decay rate

We have searched for mixing in the D(0)-D (0) system by measuring the decay-time distribution of D(0) --> K(+) pi(-) decays. The analysis uses 90 fb(-1) of data collected by the Belle detector at the KEKB e(+) e(-) collider. We fit the decay-time distribution for the mixing parameters x' and y' and also for the parameter R(D), which is the ratio of the rate for the doubly-Cabibbo-suppressed decay D(0)--> K+ pi(-) to that for the Cabibbo-favored decay D(0)--> K-pi(+). We do these fits both assuming CP conservation and allowing for CP violation. We use a frequentist method to obtain a 95% C.L. region in the x'(2) - y' plane. Assuming no mixing, we measure R(D) = (0.381 +/- 0.017(+0.008)(-0.016))%.     

A fast automatic calibration system for a sound level meter in an anechoic room

A fast automatic calibration system for a sound level meter in an anechoic environment has been developed. The precise and fast generation of the constant frequency-independent acoustic pressure field and reduction of digital voltmeter readout to sound pressure level were achieved by a newly designed software algorithm, assuming the system linearity. The performance test justified the assumed linearity, and showed that the searching speed was sufficiently fast within the small error limit.     

Measurement of time-dependent CP-violating asymmetries in B0 --> K(s)0K(s)0K(s)0 decay

We present a measurement of CP-violation parameters in the B0 --> K(s)0K(s)0K(s)0 decay based on a sample of 275 x 10(6) BB pairs collected at the upsilon(4S) resonance with the Belle detector at the KEKB energy-asymmetric e+e- collider. One neutral B meson is fully reconstructed in the decay B0 --> K(s)0K(s)0K(s)0, and the flavor of the accompanying B meson is identified from its decay products. CP-violation parameters are obtained from the asymmetry in the distributions of the proper-time interval between the two B decays: S = +1.26 +/- 0.68(stat) +/- 0.20(syst) and [symbol: see text] = +0.54 +/- 0.34(stat) +/- 0.09(syst).