Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

Enantiomer separation of a novel aminothiazolecarboxamide fungicide using polysaccharide-derived chiral stationary phases

The direct enantioseparation of a novel aminothiazolecarboxamide fungicide, ethaboxam, on polysaccharide-derived chiral stationary phases (CSPs) is described. Good resolution is achieved with several polysaccharide-derived CSPs. Chiralcel OD (OD-H) and Chiralpak AS are excellent for direct enantiomer separation of ethaboxam. The elution behavior and the effects of eluent composition on the resolution of ethaboxam are also investigated. Furthermore, the mechanism for chiral recognition using molecular mechanics is discussed.     

A facile synthesis of polypyrrole nanotubes using a template-mediated vapor deposition polymerization and the conversion to carbon nanotubes

Polypyrrole (PPy) nanotubes with highly uniform surface and tunable wall thickness were fabricated by one-step vapor deposition polymerization (VDP) using anodic aluminium oxide (AAO) template membranes, and transformed into carbon nanotubes through a carbonization process.     

Characterization of n-butyl acrylate centered triads in poly(n-butyl acrylate-co-carbon monoxide-co-ethylene) by isotopic labeling and two dimensional NMR

Poly(n-butylacrylate-co-carbon monoxide-co-ethylene) (polyEBC) samples prepared from 13C-labeled monomer, n-butyl acrylate, were characterized using two dimensional (2D) pulsed field gradient (PFG) 750 MHz NMR spectroscopy. To elucidate the complex structure of the terpolymer, 2D-1H/13C-heteronuclear single quantum coherence (HSQC) and heteronuclear multiple bond correlation (HMBC) experiments were conducted by selectively exciting the enhanced resonances in the spectra of two polymer samples, one polymer resulting from synthesis with 1-13C-n-butylacrylate monomer and a second polymer obtained from a synthesis with 2-13C-n-butylacrylate monomer. High-resolution 2D-NMR combined with 13C-labeling of the polymer greatly simplifies the 2D-NMR spectra, selectively enhances the weak peaks from low occurrence B-centered triad structures, and aids in their resonance assignments. In all experiments, the sample temperature was 120 degrees C, to ensure a homogeneous solution and sufficient molecular mobility. Electronic Supplementary Material: Supplementary material (1D 13C NMR spectra of the 13C-labeled and unlabeled polymers) is available in the online version of this article at http://dx.doi.org/100.1007/s00216-003-2402-3.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.     

Synthesis and Characterization of Fluoro- and Chloro- bimetallic Alkoxides as Precursors for Luminescent Metal Oxide Materials via Sol-Gel Technique

Heterobimetallic alkoxides are broadly recognized as versatile precursors for luminescence materials, and efforts are being made to develop novel routes by applying the concept of geometrical molecular design, for their synthesis and to design a single source precursor suited to photoluminescent materials. Novel and new series of bimetallic alkoxides has been prepared by metathesis route. They exhibit a lower sensitivity towards hydrolysis and so they are easier to handle as compared to other alkoxides. All the compounds were characterized by elemental analysis, FT-IR and multinuclear NMR spectroscopies. FT-IR revealed that the molecular structure of these metal alkoxides was retained to a large extent in 4 ： 1 halogenated alcohol-benzene solution. The heteronuclear NMR spectroscopy provided useful information about chemical shifts for better understanding the likely structure based on interactions with their coordinate metals. The mass spectra show similar types of fragmentation pattern. SEM-EDS analyses showed consistency with the formulation. XRD patterns show an enhanced homogeneity at high temperature. TGA measurements show that thermal decomposition occured in steps that depended entirely on the chemical compositions and the synthesis routes. SEM observation reveals that the morphology and particle size strongly depend on synthesis routes for their precursors.     

Ruthenium-catalyzed reductive cyclization of nitroarenes with trialkylamines leading to quinolines

Nitroarenes react with trialkylamines in the presence of a catalytic amount of a ruthenium catalyst together with tin(II) chloride dihydrate at 180 °C in an aqueous medium (toluene–H₂O) to afford the corresponding quinolines in moderate to good yields. The catalytic pathway seems to be proceeded via a sequence involving initial reduction of nitroarenes to anilines, alkyl group transfer from alkylamines to anilines to form an imine, dimerization of imine, and heterocyclization.     

Photochemical reactions of a dimethacrylate compound containing a chalcone moiety in the main chain

We synthesized the new photosensitive oligomer containing a chalcone moiety in the main chain by end-capping reaction of diepoxide compound with methacrylic acid. The chalcone-epoxy oligomeric compound was synthesized with 4,4^′-dihydroxychalcone and epichlorohydrin. Investigation of the photosensitivity of the newly synthesized chalcone oligomer was carried out by using UV-Vis absorption and infrared spectroscopies under UV exposure. We observed the photodimerization behavior under UV irradiation. At the same time, we could also observe the photopolymerization of the compound with a trace amount of dimethoxyphenyl acetophenone. Thermal properties of UV-cured dimethacrylate compounds were also studied.     

Electrolytic reduction of spent oxide fuel in a molten LiCl-Li2O system

Summary The Advanced Spent Conditioning Process (ACP) developed by the KAERI is based on pyrometallurgy and the electrolytic reduction plays a central role in transforming spent oxide fuels into metals. The constituents of the spent fuels are distributed between a salt and a reduced metal phase during electrolysis. Lithium metal is produced in a molten LiCl-Li₂O cell and then it reacts with the metal oxides of the spent fuel producing Li₂O and reduced metals. By focusing on the activity of Li₂O and the electric potential, the electrolytic reduction process of the ACP is discussed. Thermodynamic considerations are defined and operation conditions are proposed including Li₂O activity and cell potential.     

Effect of photothermal therapy on breast tumor vascular contents: noninvasive monitoring by near-infrared spectroscopy

The goal of this study was to investigate the effect of photothermal laser irradiation on rat breast tumor (DMBA-4) vascular contents. An 805-nm diode laser was used in our experiment with a power density ranging from 0.32 to 1.27 W/cm2. The dynamic changes of oxygenated hemoglobin and total hemoglobin concentrations, delta[HbO2] and delta[Hb]total, in rat tumors during photothermal irradiation were noninvasively monitored by a near-infrared spectroscopy system. A multichannel thermal detection system was also used simultaneously to record temperatures at different locations within the tumors. Our experimental results showed that: (1) photoirradiation did have the ability to induce hyperthermic effects inside the rat breast tumors in a single exponential trend; (2) the significant changes (P < 0.005) of delta[HbO2] and delta[Hb]total in response to a low dosage of laser irradiation (0.32 W/cm2) have a single exponential increasing trend, similar to that seen in the tumor interior temperature; and (3) the increase in magnitude of delta[HbO2] is nearly two times greater than that of delta[Hb]total, suggesting that photoirradiation may enhance tumor vascular oxygenation. The last observation may be important to reveal the hidden mechanism of photoirradiation on tumors, leading to improvement of tumor treatment efficiency.