A nondestructive method for estimation of the fracture toughness of CrMoV rotor steels based on ultrasonic nonlinearity

The objective of this paper is to develop a nondestructive method for estimating the fracture toughness (K(IC)) of CrMoV steels used as the rotor material of steam turbines in power plants. To achieve this objective, a number of CrMoV steel samples were heat-treated, and the fracture appearance transition temperature (FATT) was determined as a function of aging time. Nonlinear ultrasonics was employed as the theoretical basis to explain the harmonic generation in a damaged material, and the nonlinearity parameter of the second harmonic wave was the experimental measure used to be correlated to the fracture toughness of the rotor steel. The nondestructive procedure for estimating the K(IC) consists of two steps. First, the correlations between the nonlinearity parameter and the FATT are sought. The FATT values are then used to estimate K(IC) using the K(IC) versus excess temperature (i.e., T-FATT) correlation that is available in the literature for CrMoV rotor steel.     

An Experimental Study on Heat Transfer Coefficients of a CO2-Filled Thermosyphon

Abstract

Because carbon dioxide is ozone friendly and has negligible global warming potential, it has received renewed interest in recent years as an important alternative refrigerant. In this article, the heat transfer characteristics of a carbon dioxide-filled two-phase closed thermosyphon were investigated experimentally, and the empirical heat transfer correlations are reported. The heat transfer data were analyzed, and heat transfer coefficients were compared with conventional heat transfer correlations. The results represent that heat transfer correlation of the heated section can be expressed with Kutatelatze's correlation, and heat transfer coefficients of the condenser section are found to be in reasonable agreement with the Nusselt equation.     

Optimal growth conditions for GdBa2Cu3O7 thin-film coated conductors characterized by polarized Raman scattering spectroscopy

High temperature superconducting GdBa₂Cu₃O₇ (GdBCO) thin films were grown by pulsed laser ablation. Textured MgO on metal substrates was used as a template for second generation wire applications. Growth conditions of GdBCO thin films were investigated for substrate temperature (T_s) and oxygen partial pressure (PO₂) during deposition. Superconducting critical currents of the films were obtained in the films grown at 790–810 °C of T_s and at 100–700 mTorr of PO₂. Scanning electron micrographs of the films revealed uniform and well-connected grains with some outgrown structures. X-ray θ–2θ scans of the films grown at 810 °C and 300–500 mTorr exhibited c-axis oriented texture. In-plane alignment and c-axis mosaic spread of the films were determined from X-ray Φ scans and rocking curves, respectively. Polarized Raman scattering spectroscopy was used to characterize optical phonon modes, oxygen content, cation disorder, and some possible second phases of the films. The Raman spectra of the films with large critical current density showed modes at 326–329 cm⁻¹, 444–447 cm⁻¹, 500–503 cm⁻¹ related to vibration of oxygen atoms. Origin of small peaks near 600 cm⁻¹ will be discussed as well. The information obtained from Raman scattering measurements will be useful for quality control of the conductors as well as optimization of the process conditions.     

Micromorphology of epicuticular wax structures of the garden strawberry leaves by electron microscopy: Syntopism and polymorphism

Ultrastructural aspects of leaf epicuticular wax structures were investigated in the garden strawberry Fragaria × ananassa by scanning and transmission electron microscopy. Both the adaxial and abaxial surfaces of two cultivars (Maehyang and Red Pearl) were collected and subjected to surface observations and ultrathin sections. The most prominent leaf epicuticular wax structures included membraneous platelets and angular rodlets. Most wax platelets were membraneous, and appeared to protrude from the surface at an acute angle. Angular rodlets were usually bent and had rather distinct facets in the abaxial surface of the two cultivars. Membraneous platelets were predominant on the adaxial surface of Maehyang, whereas the adaxial surface of Red Pearl was characterized by angular rodlets. However, both cultivars possessed angular rodlets on the abaxial surface, simultaneously. The combination of air-drying without vacuum and in-lens imaging of secondary electron signals with a field emission gun could impart the superb resolution at low electron dose with minimal specimen shrinkage. In vertical profiles of the leaf epidermis, epicuticular waxes were observed above the cuticle layer, and measured approximately as 50 nm in thickness. The natural epicuticular waxes were seemingly mixtures of electron-dense microfibrils, and heterogeneous in shape on ultrathin sections. Distinct crystal-like strata could be hardly discernable in the wax structures. These results suggest that the garden strawberry has the nature of syntopism within one plant and polymorphism within the same species in the formation and occurrence of leaf epicuticular waxes.     

Abnormal Li diffusion in β-LiGa by the formation of defect complex

The diffusion coefficients of Li in the NaTl-type Li intermetallic compound of β-LiGa have been measured by using a short-lived radioactive diffusion tracer. As the tracer, the α-emitting radioisotope of ⁸Li delivered as the energetic and pulsed beam from Tokai Radioactive Ion Accelerator Complex (TRIAC) was implanted into the β-LiGa compounds with the composition in the range of about 43 to 54 at.% Li. By analyzing the time-dependent yields of the α-particles measured according to the repetition cycle of the beam, the tracer diffusion coefficients were extracted over the wide range of Li composition. Abnormal composition-dependence of Li diffusion coefficients in β-LiGa was observed; the stoichiometric β-LiGa showed the highest diffusivity of Li. By referring to the composition-dependent diffusivity of Li in the iso-structural β-LiAl and β-LiIn, we could identify the abnormal diffusion of Li in very Li-poor composition of β-LiGa. The anomaly has been discussed qualitatively in terms of the formation of defect complex and the interaction between the constitutional defects.     

MR microscopy of micron scale structures

Magnetic resonance (MR) microscopy of up to 1–5-μm resolutions have been reported previously. The tested phantom structures, however, had widths one order of magnitude bigger than the reported resolutions, e.g., spherical beads or capillary tubes of tens-of-micron diameters or wall thicknesses have been imaged. In this study, we fabricated structures having a few micron widths on a silicon wafer and imaged them using our 1-μm-resolution MR microscopy at 14.1 T. Micron scale width structures were, for the first time, resolved by MR microscopy.     

Fabrication of a solution-processed thin-film transistor using zinc oxide nanoparticles and zinc acetate

We have fabricated a solution-processed ZnO thin-film transistor without vacuum deposition. ZnO nanoparticles were prepared by the polyol method from zinc acetate, polyvinyl pyrrolidone, and diethyleneglycol. The solution-processable semiconductor ink was prepared by dispersing the synthesized ZnO in a solvent. Inverted stagger type thin-film transistors were fabricated by spin casting the ZnO ink on the heavily doped Si wafer with 200 nm thick SiO₂, followed by evaporation of Cr/Au source and drain electrodes. After the drying and heat treatment at 600 C, a relatively dense ZnO film was obtained. The film characteristics were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to obtain the electrical properties of the solution-derived transistor, the on–off ratio, threshold voltage, and mobility were measured.     

Thermal Hysteresis Accompanying Incommensurate-Commensurate Phase Transition in Mixed Crystals (K1-xCsx)2ZnCl4

The mixed crystal (K_1-xCs_x)₂ZnCl₄ with x = 0, 0.001, 0.01, 0.1, and 0.2 with optical quality has been grown by the Czochralski method. Using the Atomic Absorption Spectroscopy (AAS) and Energy Dispersive Spectroscopy (EDS), we determined the amount of Cs ion included in the mixed crystal. By using of DTA and DSC, we observed the change of T_c and T_i. The thermal hysteresis in the dielectric constants show strong dependence on the thermal process and on the amount of impurity which are explained by the influence of the thermal process and impurity, respectively on the creation, annihilation, and growth of discommensuration (DC).     

Fabrication of thermo-responsive polymer nanocomposites for smart window applications

Abstract

Thermo-responsive polymers have attracted much attention in recent years because they can provide a variety of applications for smart devices, but the lack of sufficient mechanical properties and late response rate of the polymers limit their applications. In the current work, we fabricated polymer nanocomposites made from poly(vinyl methyl ether) and nanofillers with photothermal conversion property such as graphene oxide, antimony tin oxide nanoparticles, and silver nanoplates. The prepared nanocomposites showed rapidly reversible and reliable transparent-opaque transitions during the repeated heating and cooling processes, suggesting that they can be applied to smart window applications.