Molecular dynamics simulation study on graphene-nanoribbon-resonators tuned by adjusting axial strain

A tunable graphene-nanoribbon (GNR)-resonator was investigated via classical molecular dynamics simulations. Resonance frequencies increased with increasing externally applied gate-force and axial-strain, and could be tuned above several hundred GHz. Tunable resonance frequencies achieved from the gate force were higher than those achieved from the axial-strain. The operating frequencies of GNR-resonators without axial-strain or with small axial-strains were most widely tuned by the gate, and almost linearly increased with increasing mean deflection. As the axial strain increased, the tunable ranges of the GNR-resonators were exponentially decreased, although the operating frequencies increased. GNR-resonators without axial-strain could be applied to wide-range-tuners, whereas GNR-resonators with high axial-strain could be applied to high-frequency-fine-tuners.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.     

Significant decrease in interfacial energy of grain boundary through serrated grain boundary transition

The mechanism of serrated grain boundary formation and its effect on liquation behaviour have been studied in a wrought nickel-based superalloy – Alloy 263. It was newly discovered that grain boundaries are considerably serrated in the absence of γ?′-phase or M₂₃C₆ at the grain boundaries. An electron energy-loss spectroscopy study suggests that serration is triggered by the discontinuous segregation of C and Cr atoms at grain boundaries for the purpose of relieving the excessive elastic strain energy. The grain boundaries serrate to have specific segments approaching one {111} low-index plane at a boundary so that the interfacial free energy of the grain boundary can be decreased, which may be responsible for the driving force of the serration. The serrated grain boundaries effectively suppress grain coarsening and are highly resistant to liquation due to their lower wettability resulting from a lower interfacial energy of the grain boundary.     

27Al Magic Angle Spinning Nuclear Magnetic Resonance Study of Al1−x Cr x K(SO4)2·12H2O (x = 0, 0.07, and 0.2)

The physical properties of Al_1?x Cr _x K(SO₄)₂·12H₂O (x = 0, 0.07, and 0.2) were studied as a function of temperature using magic angle spinning nuclear magnetic resonance for ²⁷Al. On the basis of the physical properties of pure AlK(SO₄)₂·12H₂O, the effects of partially replacing Al³⁺ with Cr³⁺ ions were examined. Molecular motion changed with the concentration of Cr³⁺ ions. The relaxation process near 320 K was found to undergo molecular motion as described by the Bloembergen–Purcell–Pound theory. The activation energies, phase transition temperatures, and spin–lattice relaxation times in the rotating frame T _1ρ changed with the concentration of paramagnetic ions.     

Quantum Spheres and Projective Spaces as Graph Algebras

 The C ^* -algebras of continuous functions on quantum spheres, quantum real projective spaces, and quantum complex projective spaces are realized as Cuntz-Krieger algebras corresponding to suitable directed graphs. Structural results about these quantum spaces, especially about their ideals and K-theory, are then derived from the general theory of graph algebras. It is shown that the quantum even and odd dimensional spheres are produced by repeated application of a quantum double suspension to two points and the circle, respectively. Received: 31 January 2001 / Accepted: 29 July 2002 Published online: 7 November 2002 RID="*" ID="*" Supported by grant No. R04–2001–000–00117–0 from the Korea Science & Engineering Foundation. RID="**" ID="**" Partially supported by the Research Management Committee of the University of Newcastle.     

Using Gd-EOB-DTPA-enhanced 3-T MRI for the differentiation of infiltrative hepatocellular carcinoma and focal confluent fibrosis in liver cirrhosis

Purpose

The purpose of the study was to determine significant imaging features to differentiate between infiltrative hepatocellular carcinoma (HCC) and confluent fibrosis (CF) in liver cirrhosis using Gd-EOB-DTPA-enhanced 3-T magnetic resonance imaging.

Material and methods

Nineteen infiltrative HCCs and eight CFs were included. We evaluated the difference in imaging findings and apparent diffusion coefficient (ADC) between the two entities. We compared T2-weighted image (WI) and hepatobiliary phase (HBP) in terms of the clarity of the lesion outer margin.

Results

Seventeen infiltrative HCCs showed lobulated margin, while focal CFs showed either straight (n = 3) or irregular margins (n = 5) (P = .001). All infiltrative HCCs had intact or bulging contours, and all focal CFs showed capsular retraction (P = .001). Fourteen infiltrative HCCs and two focal CFs showed arterial enhancement (P = .035). The ADC of infiltrative HCCs was significantly lower than that of CFs (P = .001). Satellite nodules were noted in 10 infiltrative HCCs. In terms of outer margin clarity, infiltrative HCCs showed a more distinct margin on HBP than on T2-WI (P = .005), while these two sequences were not significantly different in focal CFs (P = 1.000).

Conclusion

HBP improved the imaging characteristics of infiltrative HCC, allowing it to be distinguished from focal CF. Infiltrative HCC showed lower ADC values than focal CF. Lobular configuration, contour bulging, enhancement pattern, associated satellite nodules and portal vein thrombosis were still found to be highly suggestive MR findings for infiltrative HCC.     

High performance Zn–Sn–O thin film transistors with Cu source/drain electrode

Zn–Sn–O (ZTO) thin film transistors (TFTs) were fabricated with a Cu source/drain electrode. Although a reasonably high mobility (μ_FE) of 13.2 cm²/Vs was obtained for the ZTO TFTs, the subthreshold gate swing (SS) and threshold voltage (V_th) of 1.1 V/decade and 9.1 V, respectively, were inferior. However, ZTO TFTs with Ta film inserted as a diffusion barrier, exhibited improved SS and V_th values of 0.48 V/decade and 3.0 V, respectively as well as a high μ_FE value of 18.7 cm²/Vs. The improvement in the Ta‐inserted device was attributed to the suppression of Cu lateral diffusion into the ZTO channel region. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation and Characterization of Electroactive Anion‐Exchange Acrylic Polymer–Gold Composites

The characteristics and performance of an ionic polymer–metal composite (IPMC), prepared with an anion‐exchange acrylic copolymer, was examined. The acrylic copolymer was synthesized by the radical copolymerization of fluoroalkyl methacrylate and 2‐(dimethyl amino)ethyl methacrylate(AMA). Effects of the AMA repeating unit's content in the copolymer and effects of the anion type present on the actuation of the IPMC were observed. The optimal content of 19.4 wt% AMA in the IPMC copolymer yielded the best actuation. The actuation also improved according to the type of anion present in the composite, in the following order: Br^???4 ^?.     

Mechanical,Thermal, and Surface Properties of Ultrahigh Molecular Weight Polyethylene/Polypropylene Blends

Various compositions of ultrahigh molecular weight polyethylene/polypropylene (UHMWPE/PP) blends were prepared in decalin, with the rheological, mechanical, thermal, and surface properties of the blends being determined using the solution cast film. Viscosity and mechanical properties of the blends decreased below the additivity value with increasing PP content implying that PP molecules disturb the entanglement of UHMWPE. Contact angle of the blend films with a water drop increased with increasing content of PP. The atomic force microscope (AFM) images showed that the surface of cast UHMWPE was very smooth whereas that of cast PP was very uneven. For blends, the surface became rough and uneven with increasing content of PP. The melting temperature of PP (T _mP) decreased in the blends with increasing UHMWPE content while that of UHMWPE (T _mU) remained almost constant in blends.