Fabrication of a solution-processed thin-film transistor using zinc oxide nanoparticles and zinc acetate

We have fabricated a solution-processed ZnO thin-film transistor without vacuum deposition. ZnO nanoparticles were prepared by the polyol method from zinc acetate, polyvinyl pyrrolidone, and diethyleneglycol. The solution-processable semiconductor ink was prepared by dispersing the synthesized ZnO in a solvent. Inverted stagger type thin-film transistors were fabricated by spin casting the ZnO ink on the heavily doped Si wafer with 200 nm thick SiO₂, followed by evaporation of Cr/Au source and drain electrodes. After the drying and heat treatment at 600 C, a relatively dense ZnO film was obtained. The film characteristics were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to obtain the electrical properties of the solution-derived transistor, the on–off ratio, threshold voltage, and mobility were measured.     

Medical radioisotope 89Zr production with RFT-30 cyclotron

Journal of Radioanalytical and Nuclear Chemistry - 89Zr is an emerging radionuclide with promising application in nuclear medicine for the non-invasive diagnosis of various cancers with PET...     

Positron annihilation lifetime spectroscopy of advanced reduced-activation alloy (ARAA) in cold‐worked conditions

Journal of Radioanalytical and Nuclear Chemistry - The defects due to cold-rolling deformation in the advanced reduced-activation alloy (ARAA) have been analyzed using positron annihilation...     

Mechanical properties and degradation studies of poly(D,L‐lactide‐co‐glycolide) 50:50/graphene oxide nanocomposite films

Poly(D,L‐lactide‐co‐glycolide) 50:50 (PLGA)/graphene oxide (GO) nanocomposite films were prepared with various GO weight fractions. A significant enhancement of mechanical properties of the PLGA/GO nanocomposite films was obtained with GO weight fractions. The incorporation of only 5 wt% of GO resulted in an ~2.5‐fold and ~4.7‐fold increase in the tensile strength and Young's modulus of PLGA, respectively. The thermomechanical behaviors of composite films were investigated by dynamic mechanical analysis. Results indicated that the values of T_g and storage moduli of the PLGA/GO composites were higher than those of the pristine PLGA. The improvement in oxygen barrier properties of composites was presumably attributed to the filler effect of the randomly dispersed GO throughout the PLGA matrix. In this work, we also studied in vitro biodegradation behavior. PLGA/GO composite films were hydrolyzed at 37°C for periods up to 49 days. Because of the presence of GO nanosheets, degradation of composite films took place more slowly with increasing GO amounts. Copyright © 2013 John Wiley & Sons, Ltd.     

Low C24‐OH and C22‐OH sulfatides in human renal cell carcinoma

Histopathologic diagnosis of renal cell carcinoma (RCC) may sometimes be difficult with small biopsy samples. We applied histology‐directed matrix‐assisted laser desorption/ionization mass spectrometry to RCC samples to evaluate whether and how lipid profiles are different between RCC and normal tissue. We evaluated 59 RCC samples and 24 adjacent normal tissue samples collected from patients who underwent surgery. Five peaks were significantly differently expressed (p < 10^?7) between RCCs and adjacent normal tissue samples. C24‐OH sulfatide (ST‐OH {18:1/24:0}[M‐H]^?; m/z 906.7 in the negative ion mode) and C22‐OH sulfatide (ST‐OH {18:1/22:0}[M‐H]^?; m/z 878.6 in the negative ion mode) were most significantly underexpressed in RCC samples, compared with adjacent normal tissue samples. With 100 random training‐to‐test partitions within these samples, the median prediction accuracy (RCC vs. normal) ranged from 96.3% to 100% at p cutoff values for feature selection ranging from 0.001 to 10^?7. Two oncocytoma samples were predicted as normal tissue by five lipids that were differentially expressed between RCC and normal tissue at p < 10^?7. Clear‐cell, papillary, and chromophobe RCCs were different in lipid profiles. Permutation p‐ values for 0.632+ bootstrap cross‐validated misclassification rates were less than 0.05 for all the classifiers. Thus, lipid profiles differentiate RCC from normal tissue and may possibly classify the histology of RCC. © 2014 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.     

CDK5-dependent inhibitory phosphorylation of Drp1 during neuronal maturation

Mitochondrial functions are essential for the survival and function of neurons. Recently, it has been demonstrated that mitochondrial functions are highly associated with mitochondrial morphology, which is dynamically changed by the balance between fusion and fission. Mitochondrial morphology is primarily controlled by the activation of dynamin-related proteins including dynamin-related protein 1 (Drp1), which promotes mitochondrial fission. Drp1 activity is regulated by several post-translational modifications, thereby modifying mitochondrial morphology. Here, we found that phosphorylation of Drp1 at serine 616 (S616) is mediated by cyclin-dependent kinase 5 (CDK5) in post-mitotic rat neurons. Perturbation of CDK5 activity modified the level of Drp1^S616 phosphorylation and mitochondrial morphology in neurons. In addition, phosphorylated Drp1^S616 preferentially localized as a cytosolic monomer compared with total Drp1. Furthermore, roscovitine, a chemical inhibitor of CDKs, increased oligomerization and mitochondrial translocation of Drp1, suggesting that CDK5-dependent phosphorylation of Drp1 serves to reduce Drp1''s fission-promoting activity. Taken together, we propose that CDK5 has a significant role in the regulation of mitochondrial morphology via inhibitory phosphorylation of Drp1^S616 in post-mitotic neurons.     

Preparation of thermal-enhanced epoxy resin adhesive with organic PCM for applying wood flooring

Epoxy resins are well-known materials that show beneficial properties, such as high tensile strength and modulus, good adhesive properties, low cost, and ease of processing and environmental advantages. However, epoxy resin adhesive has no characteristic of thermal storage. Latent heat storage is one of the favorable kinds of thermal energy storage methods considered for energy saving and thermal efficiency in various fields, such as solar air conditioning systems and buildings. So we prepared thermal-enhanced epoxy resin adhesive by using PCM. This paper addresses the effects of n-hexadecane and sodium lauryl sulfate on the thermal properties and chemical properties of epoxy resin adhesive and HEAC, using differential scanning calorimetry, thermal gravimetric analysis, and Fourier transform-infrared spectroscopy. Also, we evaluated the applicability of composite epoxy resin adhesive to wood-based flooring using n-hexadecane, through measurement of bonding strength from universal testing machine analysis.