Effect of solvent upon competitive liquid-liquid extraction of alkali metal cations by isomeric dibenzo-16-crown-5-oxyacetic acids

The selectivity and efficiency of competitive liquid-liquid extraction of alkali metal cations into organic solvents containingsym-(octyl)dibenzo-16-crown-5-oxyacetic acid (2) andsym-bis[4(5)-tert-butylbenzo]-16-crown-5-oxyacetic acid (3) have been determined. Solvents examined include: dichloromethane, chloroform, carbon tetrachloride, 1,2-dichloroethane, 1,1,1-trichloroethane, benzene, toluene,p-xylene, chlorobenzene, 1,2-dichlorobenzene, and 1,2,3,4-tetrahydronaphthalene. The Na⁺/K⁺ and Na⁺/Li⁺ extraction ratios are highest in chloroform. The extraction selectivity is found to correlate with the diluent parameter (DP) of the organic solvent.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

New synthesis of 3′-deoxypurine nucleosides using samarium(III) iodide complex

Regio- and stereoselective iodinative cleavage of 2′,3′-anhydropurine nucleosides was achieved with samarium diiodide and ethyl bromoacetate to produce the corresponding 3′-iodopurine nucleosides, which were then converted to 3′-deoxypurine nucleosides including the natural product cordycepin.     

Phagocytosis of serum- and IgG-opsonized zymosan particles induces apoptosis through superoxide but not nitric oxide in macrophage J774A.1

Phagocytosis of serum- and IgG-opsonized zymosan (SOZ and IOZ, respectively) particles into J774A.1 macrophages induced apoptosis of the cells, accompanied by the expression of p21(WAF1), one of cyclin-dependent protein kinase (CDK) inhibitors. Furthermore, phagocytosis of SOZ and IOZ particles into macophages induced superoxide formation. Tat-superoxide dismutase (SOD), which is readily transduced into the cells using Tat-domain, protected the cells from the apoptosis induced by phagocytosis of SOZ and IOZ particles. lipopolysaccharide (LPS) /interferon-gamma (IFN-gamma) also caused the apoptosis of the cells. However, Tat-SOD could not protect the cells from LPS/IFN-gamma induced apoptosis, suggesting that apoptosis mechanisms involved are different from each other. In the present study, we determined the amounts of nitric oxide (NO) produced by SOZ, IOZ, and LPS/IFN-gamma, and found that SOZ and IOZ did not induce the generation of NO in macrophages, whereas LPS/ IFN-gamma did. The apoptosis due to phagocytosis was accompanied with the release of cytochrome c from mitochondrial membrane to cytosolic fraction. Furthermore, SOZ and IOZ induced the cleavage of procasapase-3 (35 kDa) to give rise to an active caspase-3 (20 kDa), which was blocked by Tat- SOD but not by 2-phenyl-4,4,5,5-tetramethylimidazoline-1-oxyl 3-oxide (PTIO), a scavenger of NO. On the other hand, LPS/IFN-gamma caused the activation of procaspase-3, which was blocked by PTIO but not by Tat-SOD. Taken together, phagocytosis of SOZ and IOZ particles induced apoptosis through superoxide but not NO in macrophages, accompanied with the release of cytochrome c and the activation of caspase-3.     

Effectively controlled microfluidic trap for spatiotemporal analysis of the electrotaxis of Caenorhabditis elegans

C. elegans is a popular model organism with a well‐developed neural network. Approximately 60% of the genes in C. elegans have genomic counterparts in humans, including those involved in building neural circuits. Therefore, we can extend the study of human neural network mechanisms to C. elegans which is easy to genetically manipulate. C. elegans shows behavioural responses to various external physical and chemical stimuli. Electrotaxis is one of its distinct behavioural responses, which is defined as movement towards the cathode in an electric field. In this study, we developed an effective microfluidic trap system for analysing electrotaxis in C. elegans. In addition, two mutant strains (unc‐54(s74) and unc‐6(e78)) from wild‐type (N2) worms were screened using the system. Wild‐type (N2) worms and the two mutant strains clearly showed different behavioural responses to the applied electric field, thus enabling the effective screening of the mutant worms from the wild type (N2). This microfluidic system can be utilized as a platform for the study of behavioural responses, and for the sorting and mutant screening of C. elegans.     

CFD evaluation of drop retraction methods for the measurement of interfacial tension of surfactant-laden drops

Drop retraction methods are popular means of measuring the interfacial tension between immiscible polymers. Experiments show that two different drop retraction methods, imbedded fiber retraction (IFR) and deformed drop retraction (DDR), give inconsistent results when a surfactant is present on the surface of the drop. These inconsistencies are deemed to be due to dilution of the surfactant and due to gradients in interfacial concentration of surfactant along the drop surface. This physical picture is quantified for the simple case of a Newtonian drop in a Newtonian matrix, with an insoluble, nondiffusive surfactant at the interface. The drop is deformed in computational fluid dynamics simulations by shearing the matrix, and then allowed to retract. Dilution and interfacial tension gradients effects are found to be especially large at the early stages of retraction, making IFR unsuitable for measuring the interfacial tension of surfactant-laden interfaces. The effects of surfactant dilution and gradients are found to persist even at late stages of retraction, causing the DDR method to underestimate the equilibrium interfacial tension significantly. The largest underestimates occur when the drop viscosity is lower than the matrix viscosity.     

High-density assembly of gold nanoparticles with zwitterionic carbon nanotubes and their electrocatalytic activity in oxygen reduction reaction

Gold nanoparticles (AuNPs) were assembled with high density onto multi-walled carbon nanotubes, which were functionalized with zwitterionic poly(imidazoliumsulfonate). The AuNP/zwitterionic CNT hybrids exhibited decent electrocatalytic activity in oxygen reduction reaction as the AuNP-based catalysts.     

Adsorption and thermal decomposition of 2-octylthieno[3,4-b]thiophene on Au(111)

The adsorption and thermal stability of 2-octylthieno[3,4-b]thiophene (OTTP) on the Au(111) surfaces have been studied using scanning tunneling microscopy (STM), temperature programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). UHV-STM studies revealed that the vapor-deposited OTTP on Au(111) generated disordered adlayers with monolayer thickness even at saturation coverage. XPS and TPD studies indicated that OTTP molecules on Au(111) are stable up to 450K and further heating of the sample resulted in thermal decomposition to produce H(2) and H(2)S via C-S bond scission in the thieno-thiophene rings. Dehydrogenation continues to occur above 600K and the molecules were ultimately transformed to carbon clusters at 900K. Highly resolved air-STM images showed that OTTP adlayers on Au(111) prepared from solution are composed of a well-ordered and low-coverage phase where the molecules lie flat on the surface, which can be assigned as a (9×2√33)R5° structure. Finally, based on analysis of STM, TPD, and XPS results, we propose a thermal decomposition mechanism of OTTP on Au(111) as a function of annealing temperature.     

Chlorination reaction behavior of Zircaloy-4 hulls: experimental and theoretical approaches

Chlorination reaction behavior of Zircaloy-4 (Zry-4) cladding hulls was demonstrated by using a quartz reactor system. By reacting at 380 °C for 3 h, mass of the Zry-4 hulls decreased by 65.8 wt% with Cl₂ utilization of 87.1 mol%. Composition of collected product was analyzed and it was revealed that concentration of Zr was higher than 99.97 wt%. The purity of Zr in the experimental result was higher than expectation when considering Sn (1.31 wt%) and Fe (0.25 wt%) contents which can produce gaseous SnCl₄ and FeCl₃ at the experimental condition. Theoretical calculations were performed to clarify the high purity of Zr by using the HSC code. The simulation results revealed that formation of ZrCl₄ is more preferred than SnCl₄, FeCl₃, and CrCl₃. The preference of chloride formation was confirmed by the theoretical calculation, and it was suggested that the major constituents of Zry-4 might react with Cl₂ to produce chlorides in an order of ZrCl₄ > CrCl₃ > SnCl₄ > FeCl₃. It was also suggested that continuous removal of ZrCl₄ and sufficient supply of Zr source during the chlorination reaction might have contributed to the high purity of Zr.     

Synthesis of Cationic Dumbbell-shaped Fullerene Nanostructures as Potential Photodynamic Sensitizers

A design of novel hydrophilic tetracationic dumbbell-shaped [60]fullerene nanostructures was made by balancing the hydrophilicity and hydrophobicity characteristics of the fullerene adduct for their potential application as photodynamic sensitizers in the PDT treatment. A sequential protection-deprotection reaction pathway was applied for the functional differentiation between primary and secondary amine moieties of pentaethylene hexamine. Synthesis of the target molecule involves two key steps of unsymmetrical esterification and amidation of malonic acid and subsequent fullerenation. The synthetic strategy was accomplished using mild reaction conditions in the intermediate molecule preparation and led a moderate overall product yield.