Photochemical degradation of blends of polystyrene and poly(2,6 -dimethyl-1,4-phenylene oxide)

Blends of polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide) that cover the entire compositional range have been subjected to the action of singlet oxygen from microwave discharge, dye-sensitized reaction, and photochemical oxidation. With the applied analytical technique, which consisted of infrared (IR) analysis, including ATR technique and a spectroscopic method combined with chemical analysis for hydroperoxide groups, it was not possible to detect any effect of the singlet oxygen treatment. For that reason singlet oxygen does not appear to be important to the initiation of the photooxidation of these blends. In connection with photochemical oxidation the interaction observed between the two components probably involves energy transfer from PS to PPO. This interaction results in the enhancement of reactions in PPO that lead to greater carbonyl group formation and crosslinking. Simultaneously, the probability of chain scission in the PS is lowered with increased PPO content, found by determining the changes in the molecular weights.     

Vibrational frequencies and structural determinations of tert-butylacetylene

The normal mode frequencies and corresponding vibrational assignments of tert-butylacetylene (TBA) are examined theoretically using the Gaussian 98 set of quantum chemistry codes. All normal modes were successfully assigned to one of the nine types of motion (C---C stretch, CC stretch, C---H stretch, C---C---C bend, CC---C bend, CC---H bend, H---C---H bend, CH₃ rock, and CH₃ twist) utilizing the C_3v symmetry of the molecule. Calculations were performed at the Hartree–Fock, B3LYP, and MP2 levels of theory using the standard 6-311G^** basis. Theoretical results were successfully compared against available experimental data.     

Poly(Arylene Ether)s with Pendant Ethynyl Groups

Abstract

Three novel bisphenols containing pendant ethynyl, hexynyl, and phenylethynyl groups were synthesized and used to prepare arylene ether polymers and copolymers. When heated to 250–350°C, the ethynyl groups react. After curing, the homopolymers were brittle due to the high crosslink density. Copolymers prepared using either 10 or 30 mol% of the ethynyl-containing bisphenol and either 90 or 70 mol% of the bisphenol with no ethynyl groups were relatively tough and formed creasible films. After a thermal cure, the copolymers became insoluble and exhibited high T _gs and good thin film tensile properties.     

Stem cell survival is severely compromised by the thymidineanalog EdU (5-ethynyl-2′-deoxyuridine), an alternative to BrdU for proliferation assays and stem cell tracing

Stem cell therapy has opened up the possibility of treating numerous degenerating diseases. However, we are still merely at the stage of identifying appropriate sources of stem cells and exploring their full differentiation potential. Thus, tracking the stem cells upon in vivo engraftment and during in vitro co-culture is very important and is an area of research embracing many pitfalls. 5-Ethynyl-2′-deoxyuridine (EdU), a rather new thymidine analog incorporated into DNA, has recently been suggested to be a novel highly valid alternative to other dyes for labeling of stem cells and subsequent tracing of their proliferation and differentiation ability. However, our results herein do not at any stage support this recommendation, since EdU severely reduces the viability of stem cells. Accordingly, we found that transplanted EdU-labeled stem cells hardly survive upon in vivo transplantation into regenerating muscle, whereas stem cells labeled in parallel with another dye survived very well and also participated in myofiber formation. Similar data were obtained upon in vitro myogenic culture, and further analysis showed that EdU reduced cell numbers by up to 88 % and increased the cell volume of remaining cells by as much as 91 %. Even at low EdU concentrations, cell survival and phenotype were substantially compromised, and the myogenic differentiation potential was inhibited. Since we examined both primary derived cells and cell lines from several species with the same result, this appears to be a common trait of EdU. We therefore suggest that EdU labeling should be avoided (or used with precaution) for stem cell tracing purposes.

Photochemical Synthesis of the Bioactive Fragment of Salbutamol and Derivatives in a Self-Optimizing Flow Chemistry Platform

The implementation of self-optimizing flow reactors has been mostly limited to model reactions or known synthesis routes. In this work, a self-optimizing flow photochemistry platform is used to develop an original synthesis of the bioactive fragment of Salbutamol and derivatives. The key photochemical steps for the construction of the aryl vicinyl amino alcohol moiety consist of a C−C bond forming reaction followed by an unprecedented, high yielding (>80 %), benzylic oxidative cyclization.     

Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition     

Atomic Layer Deposition of Aluminum-Free Silica onto Patterned Carbon Nanotube Forests in the Preparation of Microfabricated Thin-Layer Chromatography Plates

JPC – Journal of Planar Chromatography – Modern TLC - We describe the direct, conformal, atomic layer deposition (ALD) of silica onto carbon nanotubes (CNTs) in the microfabrication of...     

Quantification of Structural Integrity and Stability Using Nanograms of Protein by Flow-Induced Dispersion Analysis

In the development of therapeutic proteins, analytical assessment of structural stability and integrity constitutes an important activity, as protein stability and integrity influence drug efficacy, and ultimately patient safety. Existing analytical methodologies solely rely on relative changes in optical properties such as fluorescence or scattering upon thermal or chemical perturbation. Here, we present an absolute analytical method for assessing protein stability, structure, and unfolding utilizing Taylor dispersion analysis (TDA) and LED-UV fluorescence detection. The developed TDA method measures the change in size (hydrodynamic radius) and intrinsic fluorescence of a protein during in-line denaturation with guanidinium hydrochloride (GuHCl). The conformational stability of the therapeutic antibody adalimumab and human serum albumin were characterized as a function of pH. The simple workflow and low sample consumption (40 ng protein per data point) of the methodology make it ideal for assessing protein characteristics related to stability in early drug development or when having a scarce amount of sample available.