Heat and moisture transfer in sol–gel treated cotton fabrics

Cotton fabrics have been treated by sol–gel processes in order to produce an inorganic coating on fibres, able to modify their thermal conductivity under an irradiating flow. To this aim, fabric specimens with different silica content have been tested following the ISO 6942 standard in order to establish the effect of the coating on coupled heat and moisture transfer through the cotton fibres. The collected results have been compared with those obtained by an optimized method using a cone calorimeter as the heating source. By this latter approach, it has been demonstrated that sol–gel cotton treated fabrics with high moisture uptake possess a significantly lower thermal conductivity with respect to cotton alone.     

Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition     

Characterisation of fire retardant poly(phenylene ether) high impact polystyrene in the UL-94 test

The distribution of the temperature and the morphology of the charred material formed in the combustion of blends of poly(phenylene ether) (PPE) with high impact polystyrene (HIPS), carried out in the UL94 test, were examined. The effect of the fire retardant triphenyl phosphate is shown to be the decrease of time of burning, of temperature of the specimen and of zone involved in combustion, without apparent modification of the char structure. Hypothesis on gas and condensed phase fire retardant mechanisms are discussed.     

Mechanistic aspects of intumescent fire retardant systems

The mechanism of intumescence is studied in mixtures of ammonium polyphosphate (APP) with several polycondensates as a part of a systematic study of intumescent fire retardants. It is shown that APP reacts on heating with the polycondensate to form a precursor of the intumescent char which is obtained on further heating. The introduction of the intumescent system in polypropylene does not modify the structure of the char formed on heating. However, the polymer modifies the foaming behaviour of the system. The thermal decomposition of the char occurs with volatilisation of phosphorus moieties and formation of a relatively thermally stable residue. Effects of the thermal behaviour of the char, on fire retardance, are discussed.     

Mechanism of fire retardance in poly(2,6-dimethyl-1,4-phenylene ether)-high impact polystyrene

Preliminary results are presented of a study concerning the mechanism of action of triphenyl phosphate (TPP) added to blends of poly(phenylene ether) (PPE) and high impact polystyrene (HIPS), 65/35 w/w. Comparison of effectiveness of TPP in increasing either the oxygen index or the nitrous oxide index of the polymeric blend, indicates that the fire retardant may act by a mixed gas-condensed phase mechanism. The thermogravimetric behaviour of the fire retarded blend is compatible with this suggestion.     

Mechanisms of fire retardance in glass fibre polymer composites

It is shown that the introduction of glass fibres in the poly(butylene terephthalate) (PBT) matrix, increases its flammability. The mechanism of action of a typical fire retardant for PBT which is a mixture of a brominated organic compound and antimony trioxide, seems to involve both the condensed and the gas phase.     

Extraction of plasmid DNA from Escherichia coli cell lysate in a thermoseparating aqueous two-phase system

The primary purification of a 6.1 kilo base pair (kbp) plasmid from a desalted alkaline lysate has been accomplished by a thermoseparating aqueous two-phase system [(50% ethylene oxide-50% propylene oxide)-Dextran T 500]. The partitioning of the different nucleic acids (plasmid DNA, RNA, genomic DNA) in the thermoseparating aqueous two-phase system was followed both qualitatively by agarose gel electrophoresis and quantitatively by analytical chromatography (size exclusion- and anion-exchange mode) and PicoGreen fluorescence analysis. The experimental results showed a complete recovery of the plasmid DNA to the top phase, while 80% of total RNA and 58% of total protein was discarded to the bottom phase. Moreover, a 3.8-fold volume reduction of the plasmid DNA solution was achieved. By using a final thermoseparating step, the EO50PO50 polymer could be efficiently recycled, resulting in plasmid solution containing less than 1% polymer. The developed thermoseparating aqueous two-phase system shows great potential for the large-scale processing of plasmid DNA.     

Detection of nanoparticles in edible plant tissues exposed to nano-copper using single-particle ICP-MS

The increasing use of nanopesticides has raised concerns about their effects on crop plants and the impact of human health as well as ecological effects. While increased uptake of metal ions has been observed before, to date, very few studies have demonstrated the presence of nanoparticles in edible tissues. Single-particle inductively coupled plasma–mass spectrometry (sp-ICP-MS) has been suggested as a powerful tool to detect inorganic nanoparticles (NPs) in environmental samples. Here, we exposed edible plant tissues from lettuce, kale, and collard green to nano-CuO, simulating its use as a nanopesticide. We applied sp-ICP-MS to demonstrate the presence of nanoparticles, both in the water used to rinse crop leaf surfaces exposed to nano-CuO and within the leaf tissues. Lettuces retained the highest amounts of nCuO NPs on the leaf surface, followed by collard green and then kale. Surface hydrophilicity and roughness of the leaf surfaces played an important role in retaining nano-CuO. The results indicate that most of the nanoparticles are removed via washing, but that a certain fraction is taken up by the leaves and can result in human exposure, albeit at low levels.

Open image in new window

Graphical abstract ?