Ground vs. excited state electron transfer: adsorbed monolayers and trimers in solution

Transient emission spectroscopy has been used to probe the rate of photoinduced electron transfer between metal centres within a novel trimeric complex [[Os(bpy)2(bpe)2][Os(bpy)2Cl]2]4+, where bpy is 2,2'-bipyridyl and bpe is trans-1,2-bis-(4-pyridyl)ethylene. Transient emission experiments on the trimer, and on [Os(bpy)2 (bpe)2]2+ in which the [Os(bpy)2 Cl]+ quenching moieties are absent, reveal that the rate of photoinduced electron transfer (PET) across the bpe bridge is 1.3 +/- 0.1 x 10(8) s(-1). Investigations into the driving forces for oxidation and reduction of the electronically excited state within the trimer indicate that quenching of the [Os(bpy)2 (bpe)2]2+ centre within the trimer involves electron transfer from the [bpe Os(bpy)2 Cl]+ centres to the electronically excited state with a driving force of -0.3 eV. Monolayers of the complex, [Os(bpy)2 bpe pyridine]2+, have been formed by spontaneous adsorption onto platinum microelectrodes and used to probe the dynamics of electron transfer across the trans-1,2-bis-(4-pyridyl)ethylene bridge in the ground state. These monolayers are stable and exhibit well defined voltammetric responses for the Os2+/3+ redox reaction. Cyclic voltammograms recorded at high scan rates can be accurately modelled according to a non-adiabatic electron transfer model based on the Marcus theory using a standard heterogeneous electron transfer rate constant, k(o), of 3.1 +/- 0.2 x 10(4) s(-1) and a reorganization energy of 0.4 +/- 0.1 eV. This rate constant is a factor of approximately two orders of magnitude smaller than that found for photoinduced electron transfer across the same bpe bridge for identical driving forces. This significant difference is interpreted in terms of both the nature of the orbitals involved in electrochemically and optically driven electron transfer, as well as the strength of electronic coupling between two molecular components as opposed to a molecular component and a metal electrode.     

Radiative relaxation quantum yields for synthetic eumelanin

We report absolute values for the radiative relaxation quantum yield of synthetic eumelanin as a function of excitation energy. These values were determined by correcting for pump beam attenuation and emission reabsorption in both eumelanin samples and fluorescein standards over a large range of concentrations. Our results confirm that eumelanins are capable of dissipating >99.9% of absorbed UV and visible radiation through nonradiative means. Furthermore, we have found that the radiative quantum yield of synthetic eumelanin is excitation energy dependent. This observation is supported by corrected emission spectra, which also show a clear dependence of both peak position and peak width on excitation energy. Our findings indicate that photoluminescence emission in eumelanins is derived from ensembles of small chemically distinct oligomeric units that can be selectively pumped. This hypothesis lends support to the theory that the basic structural unit of eumelanin is oligomeric rather than heteropolymeric.     

Nickel(II)-molybdenum(III)-cyanide clusters: synthesis and magnetic behavior of species incorporating [(Me(3)tacn)Mo(CN)(3)

The substitution of Mo(III) for Cr(III) in metal-cyanide clusters is demonstrated as an effective means of increasing the strength of the magnetic exchange coupling and introducing magnetic anisotropy. Synthesis of the octahedral complex [(Me(3)tacn)Mo(CN)(3)] (Me(3)tacn = N,N',N"-trimethyl-1,4,7-triazacyclononane) is accomplished with the addition of precisely 3 equiv of LiCN to a solution of [(Me(3)tacn)Mo(CF(3)SO(3))(3)] in DMF. An excess of LiCN prompts formation of a seven-coordinate complex, [(Me(3)tacn)Mo(CN)(4)](1)(-), whereas less LiCN produces multinuclear species such as [(Me(3)tacn)(2)Mo(2)(CN)(5)](1+). In close parallel to reactions previously performed with [(Me(3)tacn)Cr(CN)(3)], assembly reactions between [(Me(3)tacn)Mo(CN)(3)] and [Ni(H(2)O)(6)](2+) or [(cyclam)Ni(H(2)O)(2)](2+) (cyclam = 1,4,8,11-tetraazacyclotetradecane) afford face-centered cubic [(Me(3)tacn)(8)Mo(8)Ni(6)(CN)(24)](12+) and linear [(Me(3)tacn)(2)(cyclam)NiMo(2)(CN)(6)](2+) clusters, respectively. Generation of the former involves a thermally induced cyanide linkage isomerization, which rapidly leads to a low-spin form of the cluster containing diamagnetic Ni(II) centers. The cyclic voltammagram of this species in DMF reveals a sequence of six successive reduction waves spaced approximately 130 mV apart, suggesting class II mixed-valence behavior upon reduction. The magnetic properties of the aforementioned linear cluster are consistent with the expected ferromagnetic coupling and an S = 4 ground state, but otherwise vary slightly with the specific conformation adopted (as influenced by the packing of associated counteranions and solvate molecules in the crystal). Magnetization data indicate an axial zero-field splitting parameter with a magnitude falling in the range [D] = 0.44-0.72 cm(-1), and fits to the magnetic susceptibility data yield exchange coupling constants in the range J = 17.0-17.6 cm(-1). These values represent significant increases over those displayed by the analogous Cr(III)-containing cluster. When perchlorate is used as a counteranion, [(Me(3)tacn)(2)(cyclam)NiMo(2)(CN)(6)](2+) crystallizes from water in a dimeric form with pairs of the linear clusters directly linked via hydrogen bonding. In this case, fitting the magnetic susceptibility data requires use of two coupling constants: one intramolecular with J = 14.9 cm(-1) and another intermolecular with J' = -1.9 cm(-1). Reacting [(Me(3)tacn)Mo(CN)(3)] with a large excess of [(cyclam)Ni(H(2)O)(2)](2+) produces a [(Me(3)tacn)(2)(cyclam)(3)(H(2)O)(2)Ni(3)Mo(2)(CN)(6)](6+) cluster possessing a zigzag structure that is a simple extension of the linear cluster geometry. Its magnetic behavior is consistent with weaker ferromagnetic coupling and an S = 6 ground state. Similar reactions employing an equimolar ratio of reactants afford related one-dimensional chains of formula [(Me(3)tacn)(cyclam)NiMo(CN)(3)](2+). Once again, the ensuing structure depends on the associated counteranions, and the magnetic behavior indicates ferromagnetic coupling. It is hoped that substitutions of the type exemplified here will be of utility in the design of new single-molecule magnets.     

Surfactant control of gas uptake: effect of butanol films on HCl and HBr entry into supercooled sulfuric acid

The entry of HCl into 60-68 wt % D(2)SO(4) and HBr into 68 wt % acid containing 0-0.18 M 1-butanol was monitored by measuring the fractions of impinging HCl and HBr molecules that desorb as DCl and DBr after undergoing H --> D exchange within the deuterated acid. The addition of 0.18 M butanol to the acid creates butyl films that reach approximately 80% surface coverage at 213 K. Surprisingly, this butyl film does not impede exchange but instead enhances it: the HCl --> DCl exchange fractions increase from 0.52 to 0.74 for 60 wt % D(2)SO(4) and from 0.14 to 0.27 for 68 wt % D(2)SO(4). HBr --> DBr exchange increases even more sharply, rising from 0.22 to 0.65 for 68 wt % D(2)SO(4). We demonstrate that this enhanced exchange corresponds to enhanced uptake into the butyl-coated acid for HBr and infer this equivalence for HCl. In contrast, the entry probability of the basic molecule CF(3)CH(2)OH exceeds 0.85 at all acid concentrations and is only slightly diminished by the butyl film. The OD groups of surface butanol molecules may assist entry by providing extra interfacial protonation sites for HCl and HBr dissociation. The experiments suggest that short-chain surfactants in sulfuric acid aerosols do not hinder heterogeneous reactions of HCl or HBr with other solute species.     

Synthesis and biodistribution of p-iodophenyl analogues of a naturally occurring imidazole ribonucleoside

A model iodophenyl imidazole ribonucleoside has been synthesized to study biodistribution properties in laboratory animals. The key intermediate 5-amino-1-(2,3,5-tri-O-acetyl-β-D-ribofuranosyl)imidazole-4-[N-(p-iodophenyl)carboxamide] ( 5 ) was synthesized by coupling N-succinimidyl-5-amino-1-(2,3,5-tri-O-acetyl-β-D-ribofuranosyl)imidazole-4-carboxylate ( 4 ) and p-iodoaniline. Deacetylation of the intermediate compound gave 5-amino-1-β-D-ribofuranosylimidazole-4-[N-(p-iodophenyl)]carboxamide ( 6 ). Ring annulation via diazotization of 5 gave 7-(2,3,5-tri-O-acetyl-β-D-ribofuranosyl)imidazo[4,5-d]-v-triazin-[3-N-(p-iodophenyl)]-4-one ( 7 ). Subsequent deacetylation of 7 afforded 7-β-D-ribofuranosylimidazo[4,5-d]-v-triazin-[3-N-(p-iodophenyl)]-4-one ( 8 ). The radiolabeled compounds, [¹²⁵I] 5 and [¹²⁵I] 6 were prepared in a manner similar to the corresponding unlabeled compounds except that p-[¹²⁵I]iodoaniline was used for coupling with 4 . Biodistribution studies of iodine-125-labeled 5 and 6 were performed in female Fischer rats and tumor bearing nude mice. Compound 6 showed uptake in the brain and proliferating tissues such as tumor and bone-marrow.     

Should dithiophosphinate esters function as RAFT agents?

[graph: see text] High-level ab initio calculations indicate that *CH3 addition to the sulfur center of S=P(Z)(Z')SCH3 (Z,Z' = CH3, CN, OCH3, Ph) is considerably less exothermic than addition to the corresponding RAFT agents, S=C(Z)SCH3. This suggests that dithiophosphinate esters may have only limited use in controlling free-radical polymerization, but should make excellent radical chain carriers in organic synthesis. The results cast doubt on the notion that phosphoranyl radicals are more "intrinsically" stabilized than carbon-centered radicals.     

Observation of a rectangular columnar phase in a DNA-calcium-zwitterionic lipid complex

In the presence of calcium, DNA and unilamellar liposomes of the zwitterionic lipid DPPC form a complex in which DNA strands are embedded between a lamellar phase of DPPC. In some complexes, in-plane alignment of the DNA strands occurs, where a DNA-DNA interaxial distance can be measured using small-angle X-ray scattering. Here we report a higher level of DNA organization, with a rectangular columnar phase of DNA identified within this complex structure. This observation is important in view of recent interests in creating new synthetic systems at the interface of biology.     

Highly enantioselective hydrogenation of aromatic-heteroaromatic ketones

Asymmetric hydrogenation of ketone 1 using trans-RuCl(2)[(R)-xylbinap][(R)-daipen] (3) as a catalyst afforded secondary alcohol 2 quantitatively and in 99.4% ee. Further exploration of the effect of the thiazole ring substitution revealed that the catalyst was highly effective for the enantioselective hydrogenation of 5-benzoyl thiazoles, which afforded corresponding alcohols in 92-99% ee. The same protocol was applicable to a variety of aromatic-heteroaromatic ketones to generate secondary alcohols in excellent enantioselectivities. [reaction: see text]     

Complexation of silver and co-recovered metals with novel aza-crown ether macrocycles by electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry (ESI-MS) is used to evaluate the metal binding selectivities of an array of novel caged macrocycles for silver, gold, copper, nickel, zinc, iron, lead, manganese and alkali metal ions. It is found that five of the new compounds display silver selectivity, and their relative affinities for various metals depend on the type, number, and arrangement of heteroatoms (N, O), the cavity size, and the presence of aromatic substituents. Alkali metal cation binding studies are used to evaluate the size-selectivities of the cavities of the macrocycles. Electronic structure calculation by B3LYP density function theory methods were used to model the metal complexes. The presence of nitrogen atoms in the macrocyclic ring is essential for silver selectivity over other transition metals and alkali metal ions, and the presence of aromatic groups also enhances silver avidity. Macrocycle 3, a triaza-18-crown-6 analog modified with two phenyl groups and a cage group, is capable of selective extraction of Ag+ from aqueous solutions in the presence of other transition metal ions and the most common alkali and alkaline earth metal ions.     

Metal versus ligand alkylation in the reactivity of the (bis-iminopyridinato)Fe catalyst

The alkylation of the Brookhart-Gibson {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)} FeCl2 precatalyst with 2 equiv of LiCH2Si(CH3)3 led to the isolation of several catalytically very active products depending on the reaction conditions. The expected dialkylated species {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2}(C5H3N)Fe(CH2SiMe3)2 (2) was indeed the major component of the reaction mixture. However, other species in which alkylation occurred at the pyridine ring ortho position, {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2-2-CH2SiMe3}(C5H3N)Fe(CH2SiMe3) (1), and at the imine C atom, {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC(CH3)(CH2 SiMe3)](C5H3N)}Fe(CH2SiMe3) (3), have also been isolated and fully characterized. In addition, deprotonation of the methyl-imino functions and formation of a new divalent Fe catalyst {[2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}Fe(mu-Cl)Li(THF)3 (4) also occurred depending on the reaction conditions. In turn, the formation of 4 might trigger the reductive coupling of two units through the methyl-carbon wings. This process resulted in the one-electron reduction of the metal center, affording a dinuclear Fe(I) alkyl catalyst {[{[2,6-(i-Pr)2C6H5]N=C(CH3)}(C5H3N){[2,6-(i-Pr)26H5]N=CCH2}Fe(CH2SiMe3)]}2 (5). Different from other metal derivatives, complex 5 could not be prepared from the monodeprotonated version of the ligand. Its reaction with a mixture of FeCl2 and RLi afforded instead [{2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}FeCH2Si(CH3)3][Li(THF)4] (6) which is also catalytically active. All of these high-spin species have been shown to have high catalytic activity for olefin polymerization, producing polymers of two distinct natures, depending on the formal oxidation state of the metal center.