An investigation of site-selective gas-phase reactions of amino alcohols with dimethyl ether ions

The reactions of dimethyl ether ions with neutral amino alcohols were examined in both a quadrupole ion trap mass spectrometer and a triple quadrupole mass spectrometer. These ion-molecule reactions produced two types of ions: the protonated species [M+l]⁺ and a more complex product at [M+13]⁺. The abundance of the [M+13]⁺ ions relative to that of the [M+1]⁺ ions decreases with increasing formal interfunctional distance. Multistage collision-activated dissociation techniques were used to characterize the [M+13]⁺ product ions, their reactivities, and the mechanisms for their formation and dissociation. In addition, molecular semiempirical calculation methods were used to probe the thermochemistry of these reactions. Reaction at the amino alcohol nitrogen site is favored, and the resulting [M+13]⁺ addition products may cyclize for additional stabilization. Comparisons were made among the behavior of related compounds, such as alcohols, diols, amines, and diamines. The alcohols reacted only to form the protonated species, but the diols, amines, and diamines all formed significant amounts of [M+13]⁺ ions or related dissociation products.     

Gas-phase complexation of polyethers with halide ions

Gas-phase complexes of halide anions with a variety of crown ethers and acyclic analogs are formed by ion-molecule reactions in the chemical ionization source of a triple-quadrupole mass spectrometer. The ether complexes of iodide, bromide, and chloride dissociate on collisional activation by cleavage of the halide-ether electrostatic hydrogen bonds, resulting in the formation of bare halide anions. By contrast, the fluoride complexes dissociate by loss of HF, which may occur in conjunction or sequentially with losses of ethylene oxide units. This dissociation behavior is similar to that observed for collisionally activated dissociation of [M ? H]^? ions of the crown ethers and suggests that the fluoride ion is capable of promoting an intramolecular proton abstraction within the [M+F]^? complex. This type of dissociation chemistry is only observed for the fluoride ion complexes, and the fluoride ion is the most basic of all the halides. The kinetic method was used to establish orders of relative halide binding strengths, and the trends for the chloride and bromide affinities were 12-crown-4 < triethylene glycol dimethyl ether < 15-crown-5 < tetraethylene glycol dimethyl ether < 18-crown-6 < 21-crown-7 < tetraethylene glycol < pentaethylene glycol < 1,4,7,10,13-pentathiacyclopentadecane.     

Phosphorus-based SAHA analogues as histone deacetylase inhibitors

[structure: see text] Three analogues of suberoyl anilide hydroxamic acid (SAHA) with phosphorus metal-chelating functionalities were synthesized as inhibitors of histone deacetylases (HDACs). The compounds showed weak activity for HeLa nuclear extracts (IC(50) = 0.57-6.1 mM), HDAC8 (IC(50) = 0.28-0.41 mM), and histone-deacetylase-like protein (HDLP, IC(50) = 0.33-1.9 mM), suggesting that the transition state of HDAC is not analogous to zinc proteases. Antiproliferative activity against A2780 cancer cells (IC(50) = 0.11-0.12 mM), comparable to SAHA (0.15 mM), was observed.     

Total Synthesis of (+)-okaramine J featuring an exceptionally facile N-reverse-prenyl to C-prenyl aza-Claisen rearrangement

[reaction: see text] The convergent total synthesis of (+)-okaramine J was achieved in a longest linear sequence of 12 steps from l-tryptophan tert-butyl ester. A key reaction was the acid-catalyzed room-temperature aza-Claisen rearrangement of a N-reverse-prenylated hexahydro[2,3-b]pyrroloindole to a C-prenylated derivative.     

Induced fit process in the selective distal binding of imidazoles in zinc(II) porphyrin receptors

The respective affinities of various imidazole derivatives, imidazole (ImH), 2-methylimidazole (2-MeImH), 2-phenylimidazole (2-PhImH), N-methylimidazole (N-MeIm), 2-methylbenzimidazole (2-MeBzImH), and 4,5-dimethylbenzimidazole (4,5-Me(2)BzImH), for two phenanthroline (Phen) strapped zinc(II) porphyrin receptors porphen-Zn 1-Zn and 2-Zn have been studied. The formation of a supplementary H-bond considerably enhances the affinity of the zinc(II)-porphen receptor for imidazoles unsubstituted on the pyrrolic nitrogen (ImH) versus N-substituted imidazoles such as N-MeIm. The ImHs subset porphen-Zn complexes are formed with association constants up to 4 orders of magnitude superior to those measured either for N-MeIm as substrate or TPP-Zn as receptor. Distal or proximal binding of the substrates was determined by (1)H NMR measurements and titration. In two cases, the very high stability of the inclusion complex enabled the use of 2D NMR techniques. Excellent correlation between solution and solid-state structures has been obtained. A total of six X-ray structures are detailed in this article showing that the evolution of the shape of the zinc(II) receptor is mostly dependent on the steric constraints induced by the substitution on the imidazole. Hindered guests also progressively induce considerable mobility restrictions and severe distortions on the receptor, especially in the case of 2-MeBzImH and 2-PhImH.     

Assay development and high-throughput screening of caspases in microfluidic format

Caspase proteases are familiar targets in drug discovery. A common format for screening to identify caspase inhibitors employs fluorogenic or colorimetric tetra-peptide substrates in 96, 384, or 1536 -well microtiter plates. The primary motivation for increasing the number of wells per plate is to reduce the reagent cost per test and increase the throughput of HTS operations. There are significant challenges, however, to moving into or beyond the 1536-well format, such as submicroliter liquid handling, liquid evaporation, increased surface area-to-volume ratios, and the potential for artifacts and interference from small air-borne particles such as lint. Therefore, HTS scientists remain keenly interested in technologies that offer alternatives to the ever-shrinking microtiter plate well. Microfluidic assay technology represents an attractive option that, in theory, consumes only subnanoliter volumes of reagents per test. We have successfully employed a microfluidic assay technology in fluorogenic screening assays for several caspase isoforms utilizing the Caliper Technologies Labchip platform. Caspase-3 is used as a representative case to describe microfluidic assay development and initial high-throughput screening results. In addition, microfluidic screening and plate-based screening are compared in terms of reagent consumption, data quality, and ease of operation.     

Glycosidation with a disarmed glycosyl iodide: promotion and scope

[reaction: see text] Glucuronyl iodide 1 has been studied in detail as a "disarmed" glycosyl donor. In a model reaction, using N-iodosuccinimide (NIS) as a promoter and 2-phenylethanol as acceptor, best results were obtained using NIS with I(2), followed by trimethylsilyltrifluoromethanesulfonate (TMSOTf). When a series of primary and secondary alcohols was glycosylated using these conditions, yields of 60-83% of beta-glucuronides were obtained. Various "nonheavy" metal salts also effectively catalyzed the model reaction but led to significant amounts of alpha-product with less reactive secondary alcohols.     

High-throughput manual parallel synthesis using SynPhase crowns and lanterns

The high-throughput manual solid-phase parallel synthesis of libraries comprising thousands of discrete samples using pellicular supports (i.e. SynPhase crowns and lanterns) and a suite of novel tools and techniques is described. Key aspects of this approach include the combination of a split-split-split synthesis strategy with spatial encoding to differentiate thousands of crowns, the rapid washing and filtration of up to 48 reaction vessels in parallel, the application of an inexpensive and environmentally friendly technique to remove trifluoroacetic acid from sixteen 96-well plates in parallel, and a high-throughput method for removing cleaved crowns from reusable pin racks. Tens of thousands of discrete samples have been produced in-house using this conceptually and operationally straightforward strategy.     

Application of a Cholesterol-Based Stationary Phase for the Analysis of Brevetoxins

A high-performance liquid chromatography protocol for the analysis of brevetoxins has been developed using a silica hydride-based cholesterol column. Brevetoxins are neurotoxins produced by harmful algae that have additional potential as drugs for a number of illnesses/diseases. To develop the optimum conditions, a number of different experimental approaches were tested. These include isocratic and gradient elution, different organic mobile phase components, and temperature variations. A separate protocol was developed for the compounds brevenal and brevenol, also produced by the same algae that make brevetoxins. Brevenal is a natural product under investigation as a therapy for chronic respiratory diseases, such as cystic fibrosis or asthma. The goal of this study was to provide a protocol for the analysis of these compounds that could be further developed into a validated method depending on a particular laboratory's capabilities and to highlight some of the unique features of the cholesterol stationary phase.