Gas-phase complexation of polyethers with halide ions

Gas-phase complexes of halide anions with a variety of crown ethers and acyclic analogs are formed by ion-molecule reactions in the chemical ionization source of a triple-quadrupole mass spectrometer. The ether complexes of iodide, bromide, and chloride dissociate on collisional activation by cleavage of the halide-ether electrostatic hydrogen bonds, resulting in the formation of bare halide anions. By contrast, the fluoride complexes dissociate by loss of HF, which may occur in conjunction or sequentially with losses of ethylene oxide units. This dissociation behavior is similar to that observed for collisionally activated dissociation of [M ? H]^? ions of the crown ethers and suggests that the fluoride ion is capable of promoting an intramolecular proton abstraction within the [M+F]^? complex. This type of dissociation chemistry is only observed for the fluoride ion complexes, and the fluoride ion is the most basic of all the halides. The kinetic method was used to establish orders of relative halide binding strengths, and the trends for the chloride and bromide affinities were 12-crown-4 < triethylene glycol dimethyl ether < 15-crown-5 < tetraethylene glycol dimethyl ether < 18-crown-6 < 21-crown-7 < tetraethylene glycol < pentaethylene glycol < 1,4,7,10,13-pentathiacyclopentadecane.     

Buffers for the Physiological pH Range: Thermodynamics of the Second Dissociation of N-(2-Hydroxyethyl)piperazine-N′-2-hydroxypropanesulfonic Acid From 5 to 55°C

The second acidic dissociation constants pK ₂ of the ampholyte N-(2-hydroxyethyl) piperazine-N-2-hydroxypropanesulfonic acid (HEPPSO) have been determined at seven temperatures from 5 to 55°C from emf measurements utilizing hydrogen and silver–silver chloride cells without liquid junction. The thermodynamic quantities, G°, H°,S°, and C _p ^o have been calculated from the temperature coefficient of pK ₂. At 25°C, the pK ₂ = 8.042 and at 37°C, pK ₂ = 7.876; hence, buffer solutions of HEPPSO and NaHEPPSOate are important for pH control in the region close to that of clinical fluids (blood serum). Conventional pH values from 5 to 55°C as well as those obtained from liquid junction correction at 25 and 37°C have been reported for three buffer solutions with the compositions (molality scale): (1) equimolal mixture of HEPPSO (0.04 m) + NaHEPPSOate (0.04 m) + NaCl (0.12 m); (2) HEPPSO (0.08 m) + NaHEPPSOate (0.08 m); and (3) HEPPSO (0.08 m) + NaHEPPSOate (0.08 m) + NaCl (0.08 m).     

Rapid intramolecular interactions between organic isocyanates and hexafluorobut-2-yne on a dirhodium centre; X-ray crystal structure of (η-C5H5)2Rh2 {μ2(η3-C(CF3)C(CF3)C(O)N(Ph)}

Complexes of formula (η-C₅H₅₂Rh₂{CF₃C₂CF₃ · RNCO} have been prepared by three methods, from reactions between organic isocyanates and (η-C₅H₅)₂Rh₂(CO)(CF₃C₂CF₃) or (η-C₅H₅)₂Rh₂(CO)₂(CF₃C₂CF₃); by treatment of (η-C₅H₅)₂Rh₂(CO)(CF₃C₂CF₃) with organic azides; and by oxidation with Me₃NO of the organic isocyanide in (η-C₅H₅)₂Rh₂(CO)(CNR)(CF₃C₂CF₃). The crystal and molecular structure of the complex (η-C₅H₅)₂Rh₂{CF₃C₂CF₃ · RNCO} with R = Ph has been determined from single crystal X-ray diffraction data. This reveals that the isocyanate has condensed with the hexafluorobut-2-yne to form an amide ligand of the form C(CF₃)C(CF₃)C(=O)N(R); this bridges the two rhodium atoms in a μ₂η³-manner.     

Dyeing uric acid crystals with methylene blue

The growth of anhydrous uric acid (UA) and uric acid dihydrate (UAD) crystals from supersaturated aqueous solutions containing methylene blue, a cationic organic dye, has been investigated. Low concentrations of dye molecules were found to be included in both types of crystal matrixes during the growth process. Incorporation of dye into UA crystals occurs with high specificity, affecting primarily [001] and [201] growth sectors, while UAD crystals grown from solutions of similar dye concentration show inclusion but little specificity. The orientation of the UA-trapped species was determined from polarization data obtained from visible light microspectrometry. To achieve charge neutrality, a second anionic species must also be included with the methylene blue into UA and UAD crystal matrices. Under high pH conditions, crystallization of 1:1 stoichiometric mixtures of methylene blue and urate yields methylene blue hexahydrate (MBU.6(H2O). The crystal structure of MBU.6(H2O) reveals continuous pi-pi stacks of planes of dye cations and urate anions mediated by water molecules. This structure provides an optimal geometry for methylene blue-urate pairs and additional support for the incorporation of these dimers in uric acid single-crystal matrices. The strikingly different inclusion patterns in UA and UAD demonstrate that subtle changes in the crystal surfaces and/or growth dynamics can greatly affect recognition events.     

Oxorhenium(V) Complexes with Thiosemicarbazones

Neutral oxorhenium(V) complexes with thiosemicarbazones derived from 2‐pyridine formamide, HL¹, are formed when [ReOCl₃(PPh₃)₂] reacts with equimolar amounts of the ligands. Reduction of the metal and the formation of rhenium(III) complexes of the composition [Re(L¹)₂]⁺ occurs when an excess of thiosemicarbazones is used and the reaction is performed in boiling toluene for a prolonged period of time. The thiosemicarbazones deprotonate and act as tridentate ligands as has been confirmed by an X‐ray structure of [ReOCl₂(L^1b)], where HL^1b is 2‐pyridineformamide‐N(4)‐ethylthiosemicarbazone and the ligand occupies the equatorial coordination sphere of the complex together with one of the chloro ligands.     

The structure and maximum number of maximum independent sets in trees

A subset of vertices is a maximum independent set if no two of the vertices are joined by an edge and the subset has maximum cardinality. in this paper we answer a question posed by Herb Wilf. We show that the greatest number of maximum independent sets for a tree of n vertices is We give the families of trees on which these maxima are achieved. Proving which trees are extremal depends upon the structure of maximum independent sets in trees. This structure is described in terms of adjacency rules between three types of vertices, those which are in all, no, or some maximum independent sets. We show that vertices that are in some but not all maximum independent sets of the tree are joined in pairs by the α-critical edges (edges whose removal increases the size of a maximum independent set). The number of maximum independent sets is shown to depend on the structure within the tree of the α-critical edges.     

Quantum correlated twin beams

We discuss recent progress in the study of the non-classical properties of light beams generated by non-degenerate parametric splitting in ⁽²⁾ nonlinear birefringent crystals, with special emphasis on their quantum correlation (twin beams). We describe experimental results using successively pure parametric fluorescence, parametric amplification of a weak signal beam pumped by a pulsed laser, and parametric oscillation in a cavity pumped by a cw laser. In this review, we compare the respective advantages and drawbacks of the different approaches.     

Assay development and high-throughput screening of caspases in microfluidic format

Caspase proteases are familiar targets in drug discovery. A common format for screening to identify caspase inhibitors employs fluorogenic or colorimetric tetra-peptide substrates in 96, 384, or 1536 -well microtiter plates. The primary motivation for increasing the number of wells per plate is to reduce the reagent cost per test and increase the throughput of HTS operations. There are significant challenges, however, to moving into or beyond the 1536-well format, such as submicroliter liquid handling, liquid evaporation, increased surface area-to-volume ratios, and the potential for artifacts and interference from small air-borne particles such as lint. Therefore, HTS scientists remain keenly interested in technologies that offer alternatives to the ever-shrinking microtiter plate well. Microfluidic assay technology represents an attractive option that, in theory, consumes only subnanoliter volumes of reagents per test. We have successfully employed a microfluidic assay technology in fluorogenic screening assays for several caspase isoforms utilizing the Caliper Technologies Labchip platform. Caspase-3 is used as a representative case to describe microfluidic assay development and initial high-throughput screening results. In addition, microfluidic screening and plate-based screening are compared in terms of reagent consumption, data quality, and ease of operation.     

A L-RNA aptamer chiral stationary phase for the resolution of target and related compounds

In this paper, we report for the first time an aptamer-based chiral stationary phase (CSP) able to resolve racemates of both target and various related compounds. The enantiomers of tyrosine and analogues (11 enantiomeric pairs) were separated using an immobilized tyrosine-specific L-RNA aptamer as CSP and an aqueous buffer (8 mM Tris-HCl buffer, 25 mM NaCl, 5 mM MgCl2; pH 7.4) as mobile phase, at a column temperature of 10 degrees C. It appeared that the carboxylic and amino groups as well as the aromatic side chain of amino acid controlled the stereospecific recognition. Modifications on the polar groups were strongly detrimental for enantioselectivity while the replacement of the phenolic group by some bicyclic aromatic residues of different polarity, size or shape did not impair the enantioselective interaction. In addition, the effects of the mobile phase composition and column temperature upon the retention and stereoselective properties of the CSP were assessed. Finally, it was found that the immobilized RNA aptamer could be used under hydro-organic mobile phase conditions without alteration of the stationary phase stability.     

Solvothermal syntheses of Cu3P via reactions of amorphous red phosphorus with a variety of copper sources

Polycrystalline Cu₃P was successfully prepared under a wide variety of solvothermal conditions. The reaction of red phosphorus with several copper sources (copper metal, copper (I) iodide, copper (I) chloride and copper (II) chloride) at 150-200 °C for 1-2 days in water produced Cu₃P. Products were examined with powder X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. Thermal analyses and optical spectroscopy were also performed. A detailed list of reaction conditions, products and impurity phases (where applicable) are reported.