Airborne particulates (PM2.5/PM10) monitoring in Korea by instrumental neutron activation analysis

Instrumental neutron activation analysis was used for the analysis of 25 trace elements in airborne particulate matter (PM) for air pollution monitoring. For the collection of air samples, the Gent stacked filter unit low volume sampler and two types of Nuclepore polycarbonate filters were employed. Samples were collected at selected sampling dates in suburban and industrial regions of Daejon city in the Republic of Korea. Mass concentrations and black carbon of PM were measured, and enrichment factors were calculated. The results were used to describe the emission sources and their correlation patterns.     

Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Multiple isotope effect study of the acid-catalyzed hydrolysis of methyl formate

Multiple isotope effects have been measured for the acid-catalyzed hydrolysis of methyl formate in 0.5 M HCl at 20 degrees C. The isotope effects in the present investigation include the carbonyl carbon (13k = 1.028 +/- 0.001), the carbonyl oxygen (18k = 0.9945 +/- 0.0009), the nucleophile oxygen (18k = 0.995 +/- 0.001), and the formyl hydrogen ((D)k = 0.81 +/- 0.02). Determination of the carbonyl carbon, carbonyl oxygen, and formyl hydrogen isotope effects was performed via isotopic analysis of residual substrate. However, determination of the oxygen nucleophile isotope effect required analysis of the oxygen atoms of the product (formic acid), which exchange with the solvent (water) under acid conditions. This necessitated measurement of the rate of exchange of these oxygen atoms under the conditions for hydrolysis (k(ex) = 0.0723 min(-1)) and correction of the raw isotope ratios measured during the nucleophile-O isotope effect experiment. These results, along with the previously reported isotope effect for the leaving oxygen (18k = 1.0009) and the ratio of the rate of hydrolysis to that of exchange of the carbonyl oxygen with water (k(h)/k(ex) = 11.3), give a detailed picture of the transition-state structure for the reaction.     

Performance of hollow-fiber flow field-flow fractionation in protein separation

Since hollow-fiber flow field-flow fractionation (HF FIFFF) utilizes a cylindrical channel made of a hollow-fiber membrane, which is inexpensive and simple in channel assembly and thus disposable, interests are increasing as a potential separation device in cells, proteins, and macromolecules. In this study, performance of HF FIFFF of proteins is described by examining the influence of flow rate conditions and length of fiber (polyacrylonitrile or PAN in this work) on sample recovery as well as experimental plate heights. The interfiber reproducibility in terms of separation time and recovery was also studied. Experiments showed that sample recovery was consistent regardless of the length of fiber when the effective field strength (equivalent to the mean flow velocity at the fiber wall) and the channel void time were adjusted to be equivalent for channels of various fiber lengths. This supported that the majority of sample loss in HF FIFFF separation of apoferritin and their aggregates may occur before the migration process. It is finally demonstrated that HF FIFFF can be applied for characterizing the reduction in Stokes' size of low density lipoproteins from blood plasma samples obtained from patients having coronary artery disease and from healthy donors.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

Selective Recognition of Calcium Ion through Liquid Membrane

The mole transport rate of alkaline earth metal ions through a bulk liquid membrane and a supported liquid membrane using a series of proton diionizable acyclic polyethers was measured. Among alkaline earth metal ions, the calcium ion was observed to be selectively transported in both single and competitive transport experiments. Potentiometric titration and solution calorimetric titration also gave calcium selectivity over other alkaline earth metal ions. Acyclic polyether bearing a diethylene glycol unit andn-tetradecyl lipophilic chain at the α position of carboxylic acid affords the best selectivity for the calcium ion in bulk and supported liquid membranes.     

Photoinduced axial ligation and deligation dynamics of nonplanar nickel dodecaarylporphyrins

The ground- and excited-state metal-ligand dynamics of nonplanar nickel(II) 2,3,5,7,8,10,12,13,15,17,18,20-dodecaphenylporphyrin (NiDPP) and two fluorinated analogues (NiF(20)DPP and NiF(28)DPP) have been investigated using static and time-resolved absorption spectroscopy in toluene and in ligating media that differ in basicity, aromaticity, and steric encumbrance. Because of the electronic and steric consequences of nonplanarity, NiDPP does not bind axial ligands in the ground state, but metal coordination does occur after photoexcitation with multistep dynamics that depend on the properties of the ligand. Following the structural relaxations that occur in all nickel porphyrins within approximately 10 ps, ligand binding to photoexcited NiDPP is progressively longer in pyridine, piperidine, and 3,5-lutidine (25-100 ps) but does not occur at all in 2,6-lutidine in which the ligating nitrogen is sterically encumbered. The transient intermediate that is formed, which nominally could be either a five- or six-coordinate species, also has a ligand-dependent lifetime (200-550 ps). Decay of this intermediate occurs partially via ligand release to re-form the uncoordinated species, in competition with binding of the second axial ligand and/or conformational/electronic relaxations (of a six-coordinate intermediate) to give the ground state of the bis-ligated photoproduct. The finding that the photoproduct channel principally depends on ligand characteristics along with the time-evolving spectra suggests that the transient intermediate may involve a five-coordinate species. In contrast to NiDPP, the fluorinated analogues NiF(20)DPP and NiF(28)DPP do coordinate axial ligands in the ground state but eject them after photoexcitation. Collectively, these results demonstrate the sensitivity with which the electronic and structural characteristics of the macrocycle, substituents, and solvent (ligands) can govern the photophysical and photochemical properties of nonplanar porphyrins and open new avenues for exploring photoinduced ligand association and dissociation behavior.     

Observation and interpretation of HH coupling in 1H187Os satellite NMR spectra

The single hydride resonance observed for each of the compounds H₃Os₃(CO)₉CX (X = OMe, Br, H) has one set of ¹⁸⁷Os satellites which are further split into doublets by HH coupling. The implications of this observation for structural assignments based on ¹⁸⁷Os satellites are discussed.     

Highly stereoselective synthesis of 2,5-disubstituted 3-vinylidene tetetrahydrofurans via Prins-type cyclization

[reaction: see text]. A novel synthetic methodology for 2,5-disubstituted tetrahydrofurans having an allenyl group at the 3-position via Prins-type cyclization was developed. The reaction led to excellent selectivity and moderate to high yields.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.