给电子体在丙烯聚合MgCl2载体催化剂体系中的作用

制备了3种含有不同内给电子体(邻苯二甲酸二异丁酯,9,9-二甲氧基甲基-芴和1,1-双甲氧基甲基-环丁烷)的MgCl2负载型丙烯聚合齐格勒-纳塔(Z-N)催化剂,研究了给电子体结构与聚合性能之间的关系,用红外光谱剖析了催化剂及其相关化合物的结构,结果发现催化剂中的内给电子体直接与MgCl2配位,而没有与TiCl4结合.内给电子体的加入,降低了Z-N催化剂中钛的含量,提高催化丙烯聚合的活性,使聚合物的分子量分布变窄.聚合物立构规整度的变化强烈依赖于内给电子体的结构.     

FTIR study of hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide,and acetonitrile in supercritical CO_2

FTIR spectroscopy was used to study the hydrogen bonding of stearic acid with ethanol, dimethyl sulfoxide (DMSO),and acetonitrile in supercritical CO_2 at 318.15 K, and 12.5 and 16.5 MPa. The concentrations of the cosolvents range from 0—0.6 mol·L~(-1). The area percentage of absorption bands for hydrogen-bonded and nonhydrogen-bonded species was obtained from the IR spectra. The acid and the cosolvents can form hydrogen bond even when their concentrations are very low. At fixed solute concentration, the extent of hydrogenbonding increases with cosolvent concentration. At higher ethanol concentrations, it seems that one stearic acid molecule can hydrogen bond with more than one ethanol molecules simultaneously. It is seen that the strength of the hydrogen bond formed by the acid and the cosolvents is in the order: DMSO>ethanol>acetonitrile.     

核壳纳米球钴基金属有机聚合物的制备及其储锂性能

以偏苯三甲酸和六水合硝酸钴为原料,通过水热法合成了2种反应时间不同的钴基金属有机聚合物(Co-MOP)。采用X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和N₂吸附-脱附对Co-MOP材料进行了结构和形貌表征。将2种Co-MOP材料用作锂离子电池负极材料,并进行了电化学性能测试。结果表明,Co-MOP-12(水热反应12 h)展示出了优异的电化学性能,在100 mA·g^-1的电流密度下,Co-MOP-12电极的首圈可逆比容量达到979 mAh·g^-1,循环100圈后比容量高达1 345 mAh·g^-1。     

In vivo Toxicity Evaluation of a Nano-drug Delivery System Using a Caenorhabditis elegansModel System

Drug carrier materials need to possess good biological safety. Presently, most biosafety evaluation studies use rodent animal models, including rats and rabbits. However, the cost of raising these animals is relatively high and the experimental period is long. Caenorhabditis elegans(C. elegans) presents an ideal toxicological evaluation model due to its simple structure, easy cultivation, short life cycle, and evolutionary conservation. In this paper, we used C. elegans to test the biological safety of our pH-responsive carrier system(FFPFF self-assembling into a nanosphere structure, FFPFF Nps), which was designed for anti-tumor drug delivery. Our results showed that exposure to high doses of FFPFF Nps did not have a significant impact on the survival rate, growth, development, movement, and reproduction of C. elegans. The preliminary evaluation of the overall biological model of C. elegans shows that FFPFF Nps has good biological safety and warrants further study.     

土槿皮三萜成分的研究

从土槿皮(Pseudolarix kaempferi, Gord.)中分到两个三萜成分, 经化学和光谱方法证明, 其一为具有羊毛甾烷母核的新三萜-3氧代-羊毛甾-7,23,25-三烯-23,26-环氧-27-羧酸, 命名为金钱松呋喃酸(1), 另一个为白桦脂酸(2), 此外, 还分到β-谷甾醇和β-谷甾醇-β-D-葡萄糖苷。     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.     

牛油果中化学成分的内部萃取电喷雾电离质谱检测

采用内部萃取电喷雾电离质谱(iEESI-MS)技术,以甲醇作为萃取溶剂,无需样品预处理,在优化条件下分别对牛油果果肉和果皮中化学成分进行快速直接鉴定,并考察了不同成熟度牛油果果肉中化学成分的差异.实验结果表明,在负离子检测模式下,从果肉中鉴定出棕榈酸、硬脂酸、棕榈油酸、油酸和亚麻酸等12种有效营养成分,从果皮中鉴定出儿茶素、绿原酸等11种营养成分.利用正交偏最小二乘判别分析法(OPLS-DA)对不同成熟度的牛油果果肉的iEESI-MS指纹谱图数据进行分析发现,此方法能够有效判别不同成熟程度的牛油果且5种化学成分差异显著.本方法无需样品预处理、样品耗量少、分析速度快(单个样品检测时间小于1 min)且操作简便,为植物有效营养成分和医用价值的开发提供了一种快速质谱分析新方法.     

油茶果壳活性炭的制备及其对Cr(Ⅵ)的去除

利用磷酸活化法制备油茶果壳活性炭,并将其作为吸附剂用于去除水溶液中的Cr(Ⅵ),同时探讨了不同参数(Cr(Ⅵ)的初始浓度、吸附剂的用量、pH、温度等)对油茶果壳活性炭吸附Cr(Ⅵ)的影响。结果表明:当温度为293 K,Cr(Ⅵ)初始浓度为250 mg/L,pH为2.0时,Cr(Ⅵ)的最大吸附量可达165.0 mg/L。根据吸附动力学原理,发现其吸附过程遵循拟二级动力学模型。Cr(Ⅵ)的去除程度随Cr(Ⅵ)初始浓度的升高而增加,且其平衡数据与Freundlich模型拟合良好。