Carrier transport in two-dimensional graphene layers

Carrier transport in gated 2D graphene monolayers is considered in the presence of scattering by random charged impurity centers with density n(i). Excellent quantitative agreement is obtained (for carrier density n>10(12) cm(-2)) with existing experimental data. The conductivity scales linearly with n/n(i) in the theory. We explain the experimentally observed asymmetry between electron and hole conductivities, and the high-density saturation of conductivity for the highest mobility samples. We argue that the experimentally observed saturation of conductivity at low density arises from the charged impurity induced inhomogeneity in the graphene carrier density which becomes severe for n less, similarn(i) approximately 10(12) cm(-2).     

Silver-doped calcium phosphate nanopowders prepared by electrostatic spraying

Silver-doped calcium phosphate nanopowders were successfully prepared by the cost-effective electrostatic spray-pyrolysis process. The properties of the silver-doped nanopowder annealed at 500°C for 30 min were investigated through X-ray diffraction analysis, field emission scanning electron microscope, and Fourier transform infrared spectroscopy. The silver-doped nanopowders with 70–90 nm particle size showed an antibacterial performance against Escherichia coli.     

Improved device performance in nonpolar a ‐plane GaN LEDs using a Ni/Al/Ni/Au n‐type ohmic contact

The authors report upon the increased light‐output power (P_out) via a reduction in the forward voltage (V_f) for nonpolar a ‐plane GaN LEDs using Ni/Al/Ni/Au n‐type ohmic contacts. The specific contact resistivity of the Ni/Al/Ni/Au contact is found to be as low as 5.6 × 10^–5 whereas that of a typical Ti/Al/Ni/Au contact is 6.8 × 10^–4 Ω cm², after annealing at 700 °C. The X‐ray photoelectron spectroscopy results show that the upward surface band bending is less pronounced for the Ni/Al contact compared to the Ti/Al contact, leading to a decrease in the effective Schottky barrier height (SBH). The V_f of the nonpolar LEDs decreases by 10% and P_out increases by 15% when the Ni/Al/Ni/Au scheme is used instead of the typical Ti/Al/Ni/Au metal scheme. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Mechanisms of Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation

For the last decade, a variant of pulsed laser ablation, Resonant-Infrared Matrix-Assisted Pulsed Laser Evaporation (RIR-MAPLE), has been studied as a deposition technique for organic and polymeric materials. RIR-MAPLE minimizes photochemical damage from direct interaction with the intense laser beam by encapsulating the polymer in a high infrared-absorption solvent matrix. This review critically examines the thermally-induced ablation mechanisms resulting from irradiation of cryogenic solvent matrices by a tunable free electron laser (FEL). A semi-empirical model is used to calculate temperatures as a function of time in the focal volume and determine heating rates for different resonant modes in two model solvents, based on the thermodynamics and kinetics of the phase transitions induced in the solvent matrices. Three principal ablation mechanisms are discussed, namely normal vaporization at the surface, normal boiling, and phase explosion. Normal vaporization is a highly inefficient polymer deposition mechanism as it relies on collective collisions with evaporating solvent molecules. Diffusion length calculations for heterogeneously nucleated vapor bubbles show that normal boiling is kinetically limited. During high-power pulsed-FEL irradiation, phase explosion is shown to be the most significant contribution to polymer deposition in RIR-MAPLE. Phase explosion occurs when the target is rapidly heated (10⁸ to 10¹⁰ K/s) and the solvent matrix approaches its critical temperature. Spontaneous density stratification (spinodal decay) within the condensed metastable phase leads to rapid homogeneous nucleation of vapor bubbles. As these vapor bubbles interconnect, large pressures build up within the condensed phase, leading to target explosions and recoil-induced ejections of polymer to a near substrate. Phase explosion is a temperature (fluence) threshold-limited process, while surface evaporation can occur even at very low fluences.     

Agglomeration,sedimentation, and cellular toxicity of alumina nanoparticles in cell culture medium

The cytotoxicity of alumina nanoparticles (NPs) was investigated for a wide range of concentration (25–200 μg/mL) and incubation time (0–72 h) using floating cells (THP-1) and adherent cells (J774A.1, A549, and 293). Alumina NPs were gradually agglomerated over time although a significant portion of sedimentation occurred at the early stage within 6 h. A decrease of the viability was found in floating (THP-1) and adherent (J774A.1 and A549) cells in a dose-dependent manner. However, the time-dependent decrease in cell viability was observed only in adherent cells (J774A.1 and A549), which is predominantly related with the sedimentation of alumina NPs in cell culture medium. The uptake of alumina NPs in macrophages and an increased cell-to-cell adhesion in adherent cells were observed. There was no significant change in the viability of 293 cells. This in vitro test suggests that the agglomeration and sedimentation of alumina NPs affected cellular viability depending on cell types such as monocytes (THP-1), macrophages (J774A.1), lung carcinoma cells (A549), and embryonic kidney cells (293).     

Search for chiral bands in A ～ 110 neutron-rich nuclei

High spin states in A ～ 110 neutron-rich 106Mo, 110Ru and 112Ru nuclei have been reinvestigated by measuring the prompt γ-rays from the spontaneous fission of 252Cf. Two similar sets of bands are observed to high spins in each of three nuclei. Through analyzing of characters of the band structures, the chiral doublet bands are suggested in 106Mo, 110Ru and 112Ru.     

Photoemission studies of oxygen adsorbed on a LiAl(1 1 0) alloy surface: Role of Li segregation

We investigated that the effect of the number of segregated Li atoms on the rate of oxidation on a LiAl alloy surface. Oxygen molecules adsorbed on the LiAl alloy react with the surface atoms to form stable oxides. The segregated Li atoms at reconstructed surfaces (c(2×2) and (2×1)) enhance the oxidation rate and form stable LiAlO_x and Li₂O. The degree of enhancement of oxidation by segregated Li atoms varies as a function of O₂ exposure and annealing temperature, where the latter is directly related to the mode of surface reconstruction by Li segregation.     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

An Efficient Quantum Private Comparison of Equality over Collective-Noise Channels

This article proposes a collective-noise resistant QPC protocol with the help of an almostdishonest third party (TP) who may try to perform any sort of attacks to derive participants’ private secrets except colluding with any participant. The proposed scheme has some considerable advantages over the state-of-the-art QPC protocols over collective-noise channels, where it does not require any pre-shared key between the participants (Alice and Bob). Nevertheless, the proposed scheme can resist Trojan horse attacks without consuming half of the transmitted qubits and any additional equipment (wavelength filter and PNS) support. As a consequence, the proposed QPC protocol can guarantee higher qubit efficiency as compared to the others over collective noise channels.     

Quantum Systems Connected by a Time-Dependent Canonical Transformation

We study both classical and quantum relation between two Hamiltoniansystems which are mutually connected by time-dependent canonical transformation. One is ordinary conservative system and the other istime-dependent Hamiltonian system. The quantum unitary operatorrelevant to classical canonical transformation between the two systems are obtained through rigorous evaluation. With the aid of the unitary operator, we have derived quantum states of the time-dependent Hamiltonian system through transforming the quantum states of the conservative system. The invariant operators of the two systems are presented and the relation between them are addressed. We showed that there exist numerous Hamiltonians, which gives the same classical equation of motion. Though it is impossible to distinguish the systems described by these Hamiltonians within the realm of classical mechanics, they can be distinguishable quantum mechanically.