Hydrothermal synthesis of Bi2Te3 nanowires through the solid-state interdiffusion of Bi and Te atoms on the surface of Te nanowires

Polycrystalline Bi₂Te₃ nanowires were prepared by a hydrothermal method that involved inducing the nucleation of Bi atoms reduced from BiCl₃ on the surface of Te nanowires, which served as sacrificial templates. A Bi–Te alloy is formed by the interdiffusion of Bi and Te atoms at the boundary between the two metals. The Bi₂Te₃ nanowires synthesized in this study had a length of 3–5 μm, which is the same length as that of the Te nanowires, and a diameter of 300–500 nm, which is greater than that of the Te nanowires. The experimental results indicated that volume expansion of the Bi₂Te₃ nanowires was a result of the interdiffusion of Bi and Te atoms when Bi was alloyed on the surface of the Te nanowires. The morphologies of Bi₂Te₃ are strongly dependent on the reaction conditions such as the temperature and the type and concentration of the reducing agent. The morphologies, crystalline structure and physical properties of the product were analyzed by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and X-ray photoelectron spectroscopy (XPS).     

Kinetics of graft copolymerization of methyl methacrylate onto polychloroprene with tricaprylylmethylammonium chloride as a phase‐transfer catalyst

The phase‐transfer catalyzed graft copolymerization of methyl methacrylate onto polychloroprene was carried out using tricaprylylmethylammonium chloride as a phase‐transfer catalyst in a two‐phase system of an aqueous Na₂S₂O₈ solution and toluene at 55 °C under a nitrogen atmosphere. The initial rate of graft copolymerization was expressed as the combined terms of quaternary onium cation and peroxydisulfate anion in the aqueous phase rather than the fed concentrations of catalyst and Na₂S₂O₈. The observed initial rate of graft copolymerization was used to analyze the graft copolymerization mechanism with a cycle phase‐transfer initiation step in the heterogeneous liquid–liquid system. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3543–3549, 2000     

Concise syntheses of (+)-macrosphelides A and B

[reaction: see text]. Unified and highly convergent total syntheses of (+)-macrosphelides A and B are described. Key features of the syntheses include (1) concise synthesis of the optically active delta-hydroxy-gamma-keto alpha,beta-unsaturated acid fragment via the direct addition of a trans-vinylogous ester anion equivalent to the readily available Weinreb amide and (2) facile construction of the 16-membered macrolide core of the macrosphelide series via an intramolecular nitrile-oxide cycloaddition (INOC).     

Microphase separation of PEG-modified urethane acrylate and the swelling behavior of its gels

The viscosity of PEG-modified urethane acrylate (PMUA) showed peculiar behavior in the course of soap-free emulsification. Moreover, the viscosity change with added amounts of water was influenced by the reaction molar ratio of polyethylene glycol (PEG). The rate of increase in viscosity slowed and the ratio of increase in viscosity increased as the reaction molar ratio of PEG increased. This peculiar viscosity behavior was due to the microphase separation between hydrophilic and hydrophobic segments of PMUA, and the orientation of polyoxyethylene groups at O/W interface which influenced droplet size of the soap-free PMUA emulsion. The location of polyoxyethylene groups of this resin at O/W interface was confirmed using the adsorption isotherm measurement of PMUA molecules containing polyoxyethylene groups at water/benzene interface. The microphase separation behavior of PMUA between hydrophilic and hydrophobic segments could apply to the preparation of the PMUA gels containing peculiar structure. PMUA gels were prepared using dioxane (UAG) and the swelling behavior of these gels were compared to that of gels prepared using water (UAHG) in the same medium. In the same medium, the swelling behavior of UAHG gels differed from that of UAG gels because of the difference in the microstructure of gel due to the microphase separation between hydrophilic and hydrophobic segments. This phase separation in the course of gelation in water could be confirmed using contact angle measurement.     

Autogenic synthesis of green- and red-emitting single-phase Pr(2)O(2)CO(3) and PrO(1.833) luminescent nanopowders

This Article reveals a rare synthesis of pure Pr(2)O(2)CO(3) (POC) nanopowder by thermolysis (700 °C) of a single chemical precursor in an autogenic reaction. The autogenic thermolysis of praseodymium acetate is a solvent-free, efficient, and straightforward approach yielding luminescent POC nanoparticles. The as-prepared POC nanopowder converted to PrO(1.833) (PO) powder via combustion. Methodical morphological, structural, and compositional characterizations of POC and PO powders are carried out, supported by mechanistic elucidation and the photoluminescent properties.     

Direct determination of arsine in gases by inductively coupled plasma-dynamic reaction cell-mass spectrometry

Reliable determination of arsine (AsH₃) in gases is of great importance due to stringent regulations associated with health, safety and environmental issues. It is, however, challenging for an analyst to determine trace airborne arsine concentrations without specifically designed collection procedures using adsorption, desorption, dissolution or impinging techniques. To circumvent such technical barrier, we have newly developed a direct analytical method, characterized by introduction of an arsine gas sample into stable plasma stream, followed by gas-phase oxidation of arsine with molecular oxygen in a dynamic reaction cell (DRC) equipped within the inductively coupled plasma-mass spectrometry (ICP/MS) system, followed by subsequent detection of AsO⁺ ion. This preliminary work used trace arsine concentrations (161 μg m⁻³, 322 μg m⁻³, and 645 μg m⁻³) gravimetrically prepared in N₂ balance. The proposed method was optimized for the important experimental parameters such as the flow rates of the reaction gas, the arsine sample, and the carrier gas. This method was then validated by demonstrating good figure-of-merits including the low limit of detection (0.10 μg m⁻³), good linearity (r² > 0.9915), low measurement uncertainty (0.66%), and high speed of analysis (<6 min). The proposed method is expected to be potentially applicable to the determination of arsine in real workplace air after appropriate modifications are made.     

Enhanced Hydrogen Storage by Palladium Nanoparticles Fabricated in a Redox‐Active Metal–Organic Framework

Quick on the uptake : Palladium nanoparticles were fabricated simply by immersing {[Zn₃(ntb)₂(EtOH)₂]?4 EtOH}_n ( 1 ) in an MeCN solution of Pd(NO₃)₂ at room temperature, without any extra reducing agent. 3 wt % PdNPs@[ 1 ]^0.54+(NO₃^?)_0.54 significantly increase H₂ uptake capacities, both at 77 K and 1 bar and at 298 K and high pressures (see picture, red curve) compared to [Zn₃(ntb)₂]_n (black). ntb=4,4′,4′′‐nitrilotrisbenzoate.