Diagonal chromatographic selection of cysteinyl peptides modified with benzoquinones

The derivatization of cysteine-containing peptides with benzoquinone compounds is rapid, quantitative and specific in acidic media. The conversion of cysteines into hydrophobic benzoquinone-adducted residues in peptides is used here to alter the chromatographic properties of cysteinyl peptides during liquid chromatography separation. The benzoquinone derivatization is shown to allow the accurate selection of cysteine-containing peptides of bovine serum albumin tryptic digest by diagonal reversed-phase chromatography, which consists of one primary and a series of secondary identical liquid chromatographic separations, before and after a cysteinyl-targeted modification of the peptides by benzoquinone compounds. Figure Diagonal chromatographic selection of cysteinyl peptides modified with benzoquinones Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Determination of reducing ends with flow injection analysis with amperometric detection: application to enzyme-hydrolysed methyl cellulose

A novel method for detection of reducing ends of sugars is proposed, based on the use of as the oxidant in combination with amperometric detection and flow injection analysis (FIA). The method is very sensitive, giving values of <10 μM for the limit of detection for a series of mono- and oligosaccharides. Samples can be analysed every 30 s, and injection can be made fully automated, making it possible to perform on-line analysis of polysaccharide samples subjected to hydrolysis. Three methylcelluloses (MC) of different qualities were hydrolysed with three different glucanases, and the concentrations of reducing ends prior to, during and after hydrolysis were determined. Differences were observed between the results obtained using different combinations of enzymes and MCs, which revealed different selectivities of the various enzymes for the different substrates. One MC was also hydrolysed and analysed in real-time for three hours. The method proposed is superior to many of the standard methods used today, which require manual labour and have a lower sensitivity. Figure Set-up used for the instrumentation in the FIA system with automated injection. A pump delivers the reaction solution to the autosampler, where the samples are injected; the sample and solution react in a temperature-controlled random coil and the response is detected using an amperometric detection cell     

Diastereoselective synthesis of 2-phenylselenenyl-1,3-anti-diols and 2-phenylselenenyl-1,3-anti-azido-alcohols via hydroxy and azido-selenenylation reactions

A method to synthesize 2-phenylselenenyl-1,3-anti-diols and 2-phenyl- selenenyl-1,3-anti-azidoalcohols via hydroxy- or azido-selenenylation of trans-allylic alcohols is reported. Moreover, the first example of hydroxyl-selenenylation of an allylic azide is presented. Yields ranging from moderate to good and diastereomeric ratios up to 95:5 are achieved.     

Hyperpolarized 129Xe NMR investigation of multifunctional organic/inorganic hybrid mesoporous silica materials

An extensive study has been made on a series of multifunctional mesoporous silica materials, prepared by introducing two different organoalkoxysilanes, namely 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (AEPTMS) and 3-cyanopropyltriethoxysilane (CPTES) during the base-catalyzed condensation of tetraethoxysilane (TEOS), using the variable-temperature (VT) hyperpolarized (HP) 129Xe NMR technique. VT HP-129Xe NMR chemical shift measurements of adsorbed xenon revealed that surface properties as well as functionality of these AEP/CP-functionalized microparticles (MP) could be controlled by varying the AEPTMS/CPTES ratio in the starting solution during synthesis. Additional chemical shift contribution due to Xe-moiety interactions was observed for monofunctional AEP-MP and CP-MP as well as for bifunctional AEP/CP-MP samples. In particular, unlike CP-MP that has a shorter organic backbone on the silica surface, the amino groups in the AEP chain tends to interact with the silanol groups on the silica surface causing backbone bending and hence formation of secondary pores in AEP-MP, as indicated by additional shoulder peak at lower field in the room-temperature 129Xe NMR spectrum. The exchange processes of xenon in different adsorption regions were also verified by 2D EXSY HP-129Xe NMR spectroscopy. It is also found that subsequent removal of functional moieties by calcination treatment tends to result in a more severe surface roughness on the pore walls in bifunctional samples compared to monofunctional ones. The effect of hydrophobicity/hydrophilicity of the organoalkoxysilanes on the formation, pore structure and surface property of these functionalized mesoporous silica materials are also discussed.     

Regioselective oxygenative tetraamination of [60]fullerene. Fullerene-mediated reduction of molecular oxygen by amine via ground state single electron transfer in dimethyl sulfoxide

The reaction of [60]fullerene with a variety of a secondary aliphatic amines in 20% v/v dimethyl sulfoxide in chlorobenzene under an atmospheric pressure of molecular oxygen allows regioselective introduction of four amino groups and one epoxide group around one pentagon of the fullerene molecule in good to high yield. This new synthesis of tetraaminofullerene expoxide can be carried out with a simple procedure on a multigram scale at room temperature and affords a variety of functionalized fullerene derivatives. Near-infrared analysis of a mixture of [60]fullerene and piperidine in a deaerated dimethyl sulfoxide/chlorobenzene mixture indicated equilibrium formation of [60]fullerene radical anion (C60*-) that persists at least for 2 weeks at room temperature but reacts immediately with molecular oxygen to give the tetraaminofullerene expoxide. The Benesi-Hildebrand analysis of the concentration dependency of the near-infrared absorption indicated that a [C60*- piperidine*+] radical ion pair is formed with an equivalent constant of K = 0.62 +/- 0.02 M(-1) at 25 degrees C. This and other lines of evidence suggest that the oxygenative amination reaction involves C60-mediated reduction of molecular oxygen by the amine.     

A comparison between different techniques for the isolation of rosemary essential oil

Traditional hydrodistillation (HD), supercritical fluid extraction (SFE), organic solvent extraction (SE), and water microwave assisted hydrodistillation (MAHD) techniques were compared and evaluated for their effectiveness in the isolation of rosemary essential oil. The microwave assisted hydrodistillation technique was optimized in terms of both delivered power and time duration. The extracts/distillates were analyzed by GC and GC-MS. Microwave distillation, which exploits the physical action of microwaves on plants, showed a series of advantages over the other approaches: low cost, use of water in sample pre-treatment step, greatly reduced isolation time, and attainment of high quality essential oil distillate. Moreover, the absence of environmental impact of this innovative technique was also emphasized.     

Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

Mössbauer study of LaNiSn and NdNiSn compounds and their deuterides

Summary LaNiSn and NdNiSn compounds and their deuterides have been studied by variable temperature ¹¹⁹Sn M?ssbauer spectroscopy. The hyperfine parameters obtained experimentally are in good agreement with those derived from first principle calculations. The enlargement of quadrupole splitting observed for LaNiSn after deuteration confirms the lower symmetry of electron density around tin atoms indicated by the calculation of partial Sn-p density of states (DOS). Magnetic ordering is observed at low temperature in deuterided NdNiSn.     

Direct electrochemistry of recombinant tobacco peroxidase on gold

Direct electron transfer (DET) reactions of recombinant tobacco peroxidase (rTOP), namely direct electroreduction of Compound I/Compound II and heme Fe^3+/2+ conversion, were studied on gold electrodes. rTOP of wild type, non-glycosylated, was produced using an Escherichia coli expression system. At pH 5.0, the redox potential for direct electrochemical transformation of the Fe^3+/2+ of the peroxidase heme was −143 mV vs. AgAgCl, and 0.26 ± 0.07 pmol of the adsorbed rTOP were in DET contact with the gold electrode. The total amount of the adsorbed rTOP estimated from QCM data was 53 ± 5 pmol/cm² or 1.67 pmol when referred to the surface area of the electrodes used for electrochemical measurements. Of 1.67 pmol of adsorbed rTOP, only 0.76 pmol were catalytically active. DET between Au and the enzyme was also studied in the reaction of the bioelectrocatalytic reduction of H₂O₂ by cyclic voltammetry and amperometric detection of H₂O₂ at +50 mV with rTOP-modified Au electrodes placed in a wall-jet flow-through electrochemical cell. Maximal bioelectrocatalytic current response of the rTOP-modified gold electrodes to H₂O₂ was observed at pH 5.0 and stemmed from its bioelectrocatalytic reduction based on DET between Au and the active site of rTOP. Kinetic analysis of the DET reactions gave 52% of the adsorbed rTOP molecules active in DET reactions (0.4 pmol of adsorbed catalytically active rTOP, correspondingly), which correlated well with the non-catalytic-voltammetry data. DET was characterised by a heterogeneous ET rate constant of 13.2 s⁻¹, if one takes into account the QCM data, and 19.6 s⁻¹, if the amount of rTOP estimated from the data on DET transformation of Fe^3+/2+ couple of rTOP is considered. The sensitivity for H₂O₂ obtained for the rTOP-modified Au electrodes was 0.7 ± 0.1 A M⁻¹ cm⁻². These are the first ever-reported data on DET reactions of anionic plant peroxidases on bare gold electrodes.     

Stereochimie de l'hydrogenation des (±) Δ3(3a)-hydrindenones-4. Comparaison avec le cas de la (+) methyl-3 Δ3(3a)-hydrindenone-4 et de ses dioxolannes

We show that the four studied 4-hydrindenones (with or without a methyl substituant at C3 or C7a) give by hydrogenation on Raney nickel or on Pd/C, in various solvants, the cis 4-hydrindanones, by a kinetically controlled process. During the hydrogenation, the double bond can migrate only in the positions conjugated to the carbonyl group.In contrast, when the carbonyle is protected as a dioxolanne, the double bond is free to migrate around the five membered ring. In spite of this mobility the optical purity of the saturated dioxolannes formed is high. In the case of the (+)3-methyl Δ^3(3a) 4-hydrindenone, the enantiomeric hydrindanones $\text{9a}$ obtained by direct hydrogenation or with isomerization of the double bond are not the same. Therefore, the optical purity of the product is low, but its value allows an estimation of the relative importance of the two reaction pathways.