Detection, characterization, and quantification of resveratrol glycosides in transgenic arabidopsis over-expressing a sorghum stilbene synthase gene by liquid chromatography/tandem mass spectrometry

Transgenic Arabidopsis plants were analyzed by liquid chromatography/tandem mass spectrometry (LC/MS/MS) to investigate the glycosylation patterns of resveratrol derived from expression of a sorghum stilbene synthase gene. In negative ionization mode, the different resveratrol derivatives fragmented to yield the diagnostic deprotonated resveratrol ion at m/z 227.2. The use of precursor ion scanning led to the identification of precursor ions for different resveratrol glycosides through rapid differentiation from other phytochemical constituents. Structural information was generated simultaneously from the low-collision-energy product ion spectra using hybrid linear ion-trap mass spectrometry. Three additional resveratrol-related metabolites - a resveratrol diglucoside (M1) and trans- and cis-resveratrol acetylhexosides (M2 and M3) - were detected in the crude plant extracts. The identities of M1, M2, and M3 were confirmed by accurate mass analysis on a quadrupole time-of-flight mass spectrometer as well as beta-glucosidase digestion or UV-induced isomerization. Quantitative analyses by LC/MS in multiple reaction monitoring mode revealed that resveratrol diglucoside and cis-resveratrol acetyhexoside accumulated up to 2.79 and 10.38 microg/g, respectively, while trans-resveratrol acetylhexoside was barely detectable. This study demonstrated the power of the hybrid linear ion-trap technology for simultaneous profiling and structural characterization of stilbene-related metabolites, which would be useful to understand how resveratrol is modified in sorghum and other plants.     

pH‐ and Thiol‐Responsive BODIPY‐Based Photosensitizers for Targeted Photodynamic Therapy

A diiodo distyryl boron dipyrromethene (BODIPY) core was conjugated to two ferrocenyl quenchers through acid‐labile ketal and/or thiol‐cleavable disulfide linkers, of which the fluorescence and photosensitizing properties were significantly quenched through a photoinduced electron‐transfer process. The two symmetrical analogues that contained either the ketal or disulfide linkers could only be activated by a single stimulus, whereas the unsymmetrical analogue was responsive to dual stimuli. Upon interaction with acid and/or dithiothreitol (DTT), these linkers were cleaved selectively. The separation of the BODIPY core and the ferrocenyl moieties restored the photoactivities of the former in phosphate buffered saline and inside the MCF‐7 breast cancer cells, rendering these compounds as potential activable photosensitizers for targeted photodynamic therapy. The dual activable analogue exhibited the greatest enhancement in intracellular fluorescence intensity in both an acidic environment (pH 5) and the presence of DTT (4 mm ). Its photocytotoxicity against MCF‐7 cells also increased by about twofold upon preincubation with 4 mm of DTT. The activation of this compound was also demonstrated in nude mice bearing a HT29 human colorectal carcinoma. A significant increase in fluorescence intensity in the tumor was observed over 9 h after intratumoral injection.     

On the Ambiphilic Reactivity of Geometrically Constrained Phosphorus(III) and Arsenic(III) Compounds: Insights into Their Interaction with Ionic Substrates

The ambiphilic nature of geometrically constrained Group 15 complexes bearing the N,N‐bis(3,5‐di‐tert‐butyl‐2‐phenolate)amide pincer ligand (ONO^3?) is explored. Despite their differing reactivity towards nucleophilic substrates with polarised element–hydrogen bonds (e.g., NH₃), both the phosphorus(III), P(ONO) ( 1 a ), and arsenic(III), As(ONO) ( 1 b ), compounds exhibit similar reactivity towards charged nucleophiles and electrophiles. Reactions of 1 a and 1 b with KOtBu or KNPh₂ afford anionic complexes in which the nucleophilic anion associates with the pnictogen centre ([(tBuO)Pn(ONO)]^? (Pn=P ( 2 a ), As ( 2 b )) and [(Ph₂N)Pn(ONO)]^? (Pn=P ( 3 a ), As ( 3 b )). Compound 2 a can subsequently be reacted with a proton source or benzylbromide to afford the phosphorus(V) compounds (tBuO)HP(ONO) ( 4 a ) and (tBuO)BzP(ONO) ( 5 a ), respectively, whereas analogous arsenic(V) compounds are inaccessible. Electrophilic substrates, such as HOTf and MeOTf, preferentially associate with the nitrogen atom of the ligand backbone of both 1 a and 1 b , giving rise to cationic species that can be rationalised as either ammonium salts or as amine‐stabilised phosphenium or arsenium complexes ([Pn{ON(H)O}]⁺ (Pn=P ( 6 a ), As ( 6 b )) and [Pn{ON(Me)O}]⁺ (Pn=P ( 7 a ), As ( 7 b )). Reaction of 1 a with an acid bearing a nucleophilic counteranion (such as HCl) gives rise to a phosphorus(V) compound HPCl(ONO) ( 8 a ), whereas the analogous reaction with 1 b results in the addition of HCl across one of the As?O bonds to afford ClAs{(H)ONO} ( 8 b ). Functionalisation at both the pnictogen centre and the ligand backbone is also possible by reaction of 7 a / 7 b with KOtBu, which affords the neutral species (tBuO)Pn{ON(Me)O} (Pn=P ( 9 a ), As ( 9 b )). The ambiphilic reactivity of these geometrically constrained complexes allows some insight into the mechanism of reactivity of 1 a towards small molecules, such as ammonia and water.     

Structural Manipulation of Ruthenium(II) Polypyridine Nitrone Complexes to Generate Phosphorogenic Bioorthogonal Reagents for Selective Cellular Labeling

We report a new class of ruthenium(II) polypyridine complexes functionalized with a nitrone group as phosphorogenic bioorthogonal probes. These complexes were very weakly emissive owing to rapid C=N isomerization of the nitrone moiety, but exhibited significant emission enhancement upon strain‐promoted alkyne–nitrone cycloaddition (SPANC) reaction with bicyclo[6.1.0]nonyne (BCN)‐modified substrates. The modification of nitrone with a dicationic ruthenium(II) polypyridine unit at the α‐C‐position and a phenyl ring at the N‐position led to remarkably accelerated reaction kinetics, which are substantially greater (up to ≈278 fold) than those of other acyclic nitrone–BCN systems. Interestingly, the complexes achieved specific cell membrane/cytosol staining upon specific labeling of an exogenous substrate, BCN‐modified decane (BCN‐C10), in live cells. Importantly, the in situ generation of the more lipophilic isoxazoline adduct in the cytoplasm resulted in increased cytotoxicity, highlighting a novel approach to apply the SPANC labeling technique in drug activation.     

PCB-based integration of electrochemiluminescence detection for microfluidic systems

This communication presents an instrumental development based on the printed circuit board (PCB) technology to integrate electrochemiluminescence (ECL) analysis in microfluidic systems. PCB gold macro- (10 mm2) and micro- (0.09 mm2) electrodes and two ECL microfluidic devices are designed, fabricated and tested via luminol ECL detection. Potential modulation is performed between 0.7 and 0 V vs. Ag/AgCl for luminol oxidation, thus giving rise to on/off ECL responses in the presence of hydrogen peroxide. Synchronous detection is adopted to allow weak ECL signal recovery at a very low signal-to-noise ratio (SNR). The detection limit obtained with the two ECL microfluidic devices is 50 nM and 100 nM H2O2 for macroelectrodes and microelectrodes, respectively.     

Biphasic aqueous organometallic catalysis promoted by cyclodextrins: can surface tension measurements explain the efficiency of chemically modified cyclodextrins?

Methylated and hydroxypropylated cyclodextrins (CDs) are highly efficient mass transfer promoters in biphasic aqueous organometallic processes. The surface tension measurements demonstrated that these CDs adsorb at air-water interface and allowed to determine surface excess of CD by using Gibbs adsorption equation. Interestingly, a good correlation between surface excess and catalytic activity was obtained in the case of hydroformylation and Tsuji-Trost reactions. These results point out the importance of CD adsorption at the interface in biphasic aqueous organometallic processes.     

Relativistic calculations on the ground and excited states of AgH and AuH in cylindrical harmonic confinement

The relativistic ground and low-lying excited state potential energy curves of AgH and AuH in the presence of a cylindrical harmonic confining potential were calculated using the multi-state multi-reference perturbation theory with the spin-free no-pair Hamiltonian obtained via the third-order Douglas–Kroll transformation, incorporated with the full two-electron Breit–Pauli spin–orbit operator. The spectroscopic parameters were obtained for both the scalar- and quasi-relativistic potentials. The spin–orbit coupling constants were calculated for several strengths of the confining potential, and the effects of the applied potential on the coupling constants were analyzed using configuration interaction. This paper is dedicated to Serafín Fraga—colleague, mentor, and friend.     

NADH screen-printed electrodes modified with zirconium phosphate,Meldola blue,and Reinecke salt. Application to the detection of glycerol by FIA

Bulk screen-printed electrodes (bSPEs) modified with zirconium phosphate (ZrP) and Meldola blue (MB) and by electrochemical deposition of a Reineckate film (bMBZrPRs-SPEs) have been constructed and used as NADH sensors. Cyclic voltammetric investigation of these bulk electrochemically modified screen-printed electrodes revealed stable catalytic activity in oxidation of the reduced form of the coenzyme nicotinamide adenine dinucleotide (NADH). Flow-injection analysis (FIA) coupled with amperometric detection confirmed the improved stability of the bMBZrPRs-SPEs (10⁻⁴ mol L⁻¹ NADH, %RSD = 4.2, n = 90, pH 7.0). Other conditions, for example applied working potential (+50 mV relative to Ag|AgCl), flow rate (0.30 mL min⁻¹) and pH-dependence (range 4.0–10.0) were evaluated and optimized. A glycerol biosensor, prepared by immobilizing glycerol dehydrogenase (GDH) on the working electrode area of a bMBZrPRs-SPE, was also assembled. The biosensor was most stable at pH 8.5 (%RSD = 5.6, n = 70, 0.25 mmol L⁻¹ glycerol). The detection and quantification limits were 2.8 × 10⁻⁶ and 9.4 × 10⁻⁶ mol L⁻¹, respectively, and the linear working range was between 1.0 × 10⁻⁵ and 1.0 × 10⁻⁴ mol L⁻¹. To assess the effect of interferences, and recovery by the probe we analyzed samples taken during fermentation of chemically defined grape juice medium and compared the results with those obtained by HPLC.