Covalent binding of human serum albumin and ovalbumin by chloramine-T and chemical modification of the proteins

The covalent binding of ³⁵S-chloramine-T to human resum albumin (HSA) and ovalbumin is described. At pH 6.5, up to 24 chloramine-T molecules were found to be covalently bound per molecule of HSA; with ovalbumin the binding was only 5–7 molecule per protein molecule. Binding was accompanied by extensive modification of methionine, cysteine, histidine, tyrosine and lysine. Three new peaks appeared in the amino acid profiles of the modified proteins; two were identified as 1-aminoadipic acid (oxidation of lysine) and 3-chlorotyrosine. The most sites for covalent binding are lysine residues.     

A multiresidue pesticide monitoring procedure using gas chromatography/mass spectrometry and selected ion monitoring for the determination of pesticides containing nitrogen, sulfur, and/or oxygen in fruits and vegetables

A procedure for the analysis of over 100 pesticides that only contain combinations of carbon, hydrogen, nitrogen, sulfur, and oxygen (i.e., no phosphorous or halogen atoms) has been developed. The procedure employs gas chromatography with a mass selective detector (GC/MSD), electron impact ionization, and selected ion monitoring. This GC/MSD procedure provided lower limits of quantitation and increased confirmational data compared to the traditional element-selective GC procedures that are commonly used for the detection of this "class" of pesticides. These analytical improvements were demonstrated by 26 pesticides that were detected at ng/g levels in a variety of fruit and vegetable matrixes using this procedure; these pesticides were missed by the traditional element-selective GC procedures. Validation of the procedure was performed using acetone extraction with solid-phase extraction cleanup. Twenty representative target pesticides were used to demonstrate repeatability and linearity of the chromatographic response and recovery from fruit and vegetable matrixes.     

Molecular chaperones, folding catalysts, and the recovery of active recombinant proteins fromE. coli

The high-level expression of recombinant gene products in the gramnegative bacteriumEscherichia coli often results in the misfolding of the protein of interest and its subsequent degradation by cellular proteases or its deposition into biologically inactive aggregates known as inclusion bodies. It has recently become clear that in vivo protein folding is an energy-dependent process mediated by two classes of folding modulators. Molecular chaperones, such as the DnaK-DnaJ-GrpE and GroEL-GroES systems, suppress off-pathway aggregation reactions and facilitate proper folding through ATP-coordinated cycles of binding and release of folding intermediates. On the other hand, folding catalysts (foldases) accelerate rate-limiting steps along the protein folding pathway such as thecis/trans isomerization of peptidyl-prolyl bonds and the formation and reshuffling of disulfide bridges. Manipulating the cytoplasmic folding environment by increasing the intracellular concentration of all or specific folding modulators, or by inactivating genes encoding these proteins, holds great promise in facilitating the production and purification of heterologous proteins. Purified folding modulators and artificial systems that mimic their mode of action have also proven useful in improving the in vitro refolding yields of chemically denatured polypeptides. This review examines the usefulness and limitations of molecular chaperones and folding catalysts in both in vivo and in vitro folding processes.     

Pseudooctahedral complexes of vanadium(III): electronic structure investigation by magnetic and electronic spectroscopy

A variety of physical methods has been used to probe the non-Kramers, S = 1, V(III) ion in two types of pseudooctahedral complexes: V(acac)(3), where acac = anion of 2,4-pentanedione, and VX(3)(thf)(3), where thf = tetrahydrofuran and X = Cl and Br. These methods include tunable frequency and high-field electron paramagnetic resonance (HFEPR) spectroscopy (using frequencies of approximately 95-700 GHz and fields up to 25 T) in conjunction with electronic absorption, magnetic circular dichroism (MCD), and variable-temperature variable-field MCD (VTVH-MCD) spectroscopies. Variable-temperature magnetic susceptibility and field-dependent magnetization measurements were also performed. All measurements were conducted on complexes in the solid state (powder or mull samples). The field versus sub-THz wave quantum energy dependence of observed HFEPR resonances yielded the following spin Hamiltonian parameters for V(acac)(3): D = +7.470(1) cm(-1); E = +1.916(1) cm(-1); g(x) = 1.833(4); g(y) = 1.72(2); g(z) = 2.03(2). For VCl(3)(thf)(3), HFEPR detected a single zero-field transition at 15.8 cm(-1) (474 GHz), which was insufficient to determine the complete set of spin Hamiltonian parameters. For VBr(3)(thf)(3), however, a particularly rich data set was obtained using tunable-frequency HFEPR, and analysis of this data set gave the folowing: D = -16.162(6) cm(-1); E = -3.694(4) cm(-1); g(x) = 1.86(1); g(y) = 1.90(1); g(z) = 1.710(4). Analysis of the VTVH-MCD data gave spin Hamiltonian parameters in good agreement with those determined by HFEPR for both V(acac)(3) and VBr(3)(thf)(3) and in rough agreement with the estimate for VCl(3)(thf)(3) (D approximately 10 cm(-1), |E/D| approximately 0.18), together with the finding that the value of D is negative for both thf complexes. The electronic structures of these V(III) complexes are discussed in terms of their molecular structures and the electronic transitions observed by electronic absorption and MCD spectroscopies.     

Performance of an ultra-low elution-volume 96-well plate: drug discovery and development applications

Recently, sample preparation has been considered to be the major cause of bottlenecks during high-throughput analysis. With the assistance of robotic liquid handlers and the 96-well plate format, more samples can be prepared for subsequent liquid chromatography/tandem mass spectrometry (LC/MS/MS) analysis. Protein precipitation is still widely used despite potential loss of sensitivity or variable results due to ion suppression. The use of solid-phase extraction (SPE) clearly gives superior results but may not be as cost effective as protein precipitation due to the labor and material costs associated with the process. Here, a novel 96-well SPE plate is described that was designed to minimize the elution volume required for quantitative elution of analytes. The plate is packed with 2 mg of a high-capacity SPE sorbent that allows loading of up to 750 microL of plasma, while the novel design permits elution with as little as 25 microL. Therefore, the plate offers up to a 15-fold increase in sample concentration. The evaporation and reconstitution step that is typically required in SPE is avoided due to the concentrating ability of the plate. Examples of applications in drug discovery/development are shown and results are compared to protein precipitation. Excellent sensitivity and linearity are demonstrated.     

Efficient and regioselective synthesis of 2-alkyl-2H-indazoles

An efficient and regioselective synthesis of 2-methyl-2H-indazoles and 2-ethyl-2H-indazoles using trimethyloxonium tetrafluoroborate or triethyloxonium hexafluorophosphate is reported.     

Design of a calcium-binding protein with desired structure in a cell adhesion molecule

Ca2+, "a signal of life and death", controls numerous cellular processes through interactions with proteins. An effective approach to understanding the role of Ca2+ is the design of a Ca2+-binding protein with predicted structural and functional properties. To design de novo Ca2+-binding sites in proteins is challenging due to the high coordination numbers and the incorporation of charged ligand residues, in addition to Ca2+-induced conformational change. Here, we demonstrate the successful design of a Ca2+-binding site in the non-Ca2+-binding cell adhesion protein CD2. This designed protein, Ca.CD2, exhibits selectivity for Ca2+ versus other di- and monovalent cations. In addition, La3+ (Kd 5.0 microM) and Tb3+ (Kd 6.6 microM) bind to the designed protein somewhat more tightly than does Ca2+ (Kd 1.4 mM). More interestingly, Ca.CD2 retains the native ability to associate with the natural target molecule. The solution structure reveals that Ca.CD2 binds Ca2+ at the intended site with the designed arrangement, which validates our general strategy for designing de novo Ca2+-binding proteins. The structural information also provides a close view of structural determinants that are necessary for a functional protein to accommodate the metal-binding site. This first success in designing Ca2+-binding proteins with desired structural and functional properties opens a new avenue in unveiling key determinants to Ca2+ binding, the mechanism of Ca2+ signaling, and Ca2+-dependent cell adhesion, while avoiding the complexities of the global conformational changes and cooperativity in natural Ca2+-binding proteins. It also represents a major achievement toward designing functional proteins controlled by Ca2+ binding.     

A rapid and precise technique for measuring delta(13)C-CO(2) and delta(18)O-CO(2) ratios at ambient CO(2) concentrations for biological applications and the influence of container type and storage time on the sample isotope ratios

A simple modification to a commercially available gas chromatograph isotope ratio mass spectrometer (GC/IRMS) allows rapid and precise determination of the stable isotopes ((13)C and (18)O) of CO(2) at ambient CO(2) concentrations. A sample loop was inserted downstream of the GC injection port and used to introduce small volumes of air samples into the GC/IRMS. This procedure does not require a cryofocusing step and significantly reduces the analysis time. The precisions for delta(13)C and delta(18)O of CO(2) at ambient concentration were +/-0.164 and +/-0.247 per thousand, respectively. This modified GC/IRMS was used to test the effects of storage on the (18)O and (13)C isotopic ratios of CO(2) at ambient concentrations in four container types. On average, the change in the (13)C-CO(2) and (18)O-CO(2) ratios of samples after one week of storage in glass vials equipped with butyl rubber stoppers (Bellco Glass Inc.) were depleted by 0.12 and by 0.20 per thousand, respectively. The (13)C ratios in aluminum canisters (Scotty II and IV, Scott Specialty Gasses) after one month of storage were depleted, on average, by 0.73 and 2.04 per thousand, respectively, while the (18)O ratios were depleted by 0.38 and 1.20 per thousand for the Scotty II and IV, respectively. After a month of storage in electropolished containers (Summa canisters, Biospheric Research Corporation), the (13)C-CO(2) and (18)O-CO(2) ratios were depleted, on average, by 0.26 and enriched by 0.30 per thousand, respectively, close to the precision of measurements. Samples were collected at a mature hardwood forest for CO(2) concentration determination and isotopic analysis. A comparison of CO(2) concentrations determined with an infrared gas analyzer and from sample voltages, determined on the GC/IRMS concurrent with the isotopic analysis, indicated that CO(2) concentrations can be determined reliably with the GC/IRMS technique. The (13)C and (18)O ratios of nighttime ecosystem-respired CO(2), determined from the intercept of Keeling plots, were -26.11 per thousand (V-PDB) and -8.81 per thousand (V-PDB-CO(2)), respectively.     

Syntheses and photophysical properties of some 5(2)-aryl-2(5)-(4-pyridyl)oxazoles and related oxadiazoles and furans

A number of 5-aryl-2-(4-pyridyl)oxazoles, a 2-aryl-5-(4-pyridyl)oxazole, the related oxadiazole and furan, several 2-(4-pyridyl)cycloalkano[d]oxazoles, and many of their quaternary salts were prepared. No single standard synthesis was effective for preparation of more than a few of the 25 free bases described; methods often unique to a base were employed. Minor variations in structure sometimes produced large differences in absorption and emission wavelengths, as well as in the magnitude of the extinction coefficient. The salts are of interest as laser dyes, scintillation fluors, biological stains, and shifters for luminescent solar concentrators.