Thiophene systems. 7. Pyrido[3,2-b]thieno[3,4-e][1,4]diazepine derivatives with potential cns activity

Pyrido[3,2-b]thieno[3,4-e][1,4]diazepines ( 1a-d ) were synthesized to investigate their potential CNS activity. Synthesis of the desired ring system was effected by condensation of 2,3-diaminopyridine ( 3 ) with methyl tetrahydro-4-oxo-3-thiophenecarboxylate ( 4 ). Structural assignment of the major condensation product 5 was determined by comparison of ¹H nmr absorptions of 5 with those of related methyl lactam derivatives 11 and 14. A discussion of the possible mechanism leading to 5 in preference to isomeric lactam 6 is presented. Biological evaluation of 1a-d revealed no interesting properties.     

Structures and anion-binding properties of M4L6 tetrahedral cage complexes with large central cavities

Reaction of the bis-bidentate bridging ligand L(3), in which two bidentate chelating 3(2-pyridyl)pyrazole units are separated by a 3,3'-biphenyl spacer, with Co(II) salts affords tetranuclear cage complexes of composition [Co(4)(L(3))(6)]X(8)(X =[BF(4)](-), [ClO(4)](-), [PF(6)](-) or I(-)) in which four 6-coordinate Co(II) ions in an approximately tetrahedral array are connected by six bis-bidentate bridging ligands, one spanning each of the six edges of the Co(4) tetrahedron. In every case, X-ray crystallography reveals that the 'apical' Co(II) ion has a fac tris-chelate geometry, whereas the other three Co(II) ions have mer tris-chelate geometries, resulting in (non-crystallographic)C(3) symmetry for the cages; that this structure is retained in solution is confirmed by (1)H NMR spectroscopy of the paramagnetic cages. In every case one of the anions is located inside the central cavity of the cage, with the remaining seven outside. We found no clear evidence for an anion-based templating effect. The cage superstructure is sufficiently large to leave gaps in the centres of the faces through which the internal and external anions can exchange. Variable-temperature (19)F NMR spectroscopy was used to investigate the dynamic behaviour of the cages with X =[BF(4)](-) and [PF(6)](-) in MeCN solution: in both cases two separate signals, corresponding to external and internal anions, are clear at 233 K which have coalesced to a single signal at room temperature. Analysis of the linewidth of the minor signal (for the internal anion) at various temperatures below coalescence gave an activation energy for anion exchange of ca. 50 kJ mol(-1) in each case, a figure which suggests that anion exchange can occur via a conformational rearrangement of the cage superstructure in solution rather than opening of the cavity by cleavage of metal-ligand bonds.     

De novo design of a redox-active minimal rubredoxin mimic

Metal-binding sites in metalloproteins frequently occur at the interfaces of elements of secondary structure, which has enabled the retrostructural analysis of natural proteins and the de novo design of helical bundles that bind metal ion cofactors. However, the design of metalloproteins containing beta-structure is less well developed, despite the frequent occurrence of beta-conformations in natural metalloproteins. Here, we describe the design and construction of a beta-protein, RM1, that forms a stable, redox-active 4-Cys thiolate Fe(II/III) site analogous to the active site of rubredoxin. The protein folds into a beta-structure in the presence and absence of metal ions and binds Fe(II/III) to form a redox-active site that is stable to repeated cycles of oxidation and reduction, even in an aerobic environment.     

THE MICROVASCULAR EFFECTS OF PHOTODYNAMIC THERAPY: EVIDENCE FOR A POSSIBLE ROLE OF CYCLOOXYGENASE PRODUCTS

Photodynamic therapy (PDT) of malignant tumours may involve the interruption of tumor and peritumor microcirculation. We have studied the effect of light activation of the photosensitizing drug dihematoporphyrin ether (DHE) on rat subcutaneous arterioles and the modulation of these effects by cyclooxygenase inhibitors indomethacin and acetyl salicylic acid (ASA). Animals received DHE 48 h prior to light activation and additionally either indomethacin, ASA or saline 3 h prior to treatment. Light activation (630 nm, 60 J/cm2) resulted in a significant reduction to 62 +/- 2% SEM of initial blood flow. This effect was inhibited by ASA (98 +/- 8% SEM) and indomethacin (87 +/- 8% SEM). Results from the administration of various doses of both compounds indicate that this inhibition is dose related. The data presented here show that PDT causes a significant reduction in blood flow in normal arterioles and that this effect was inhibited by ASA and indomethacin indicating that prostaglandins or thromboxane A2 may play an important role in the microvascular response to PDT.     

Phosphazene-based ionic liquids: synthesis, temperature-dependent viscosity, and effect as additives in water lubrication of silicon nitride ceramics

Phosphazene rings with (dimethylamino)ethoxy (1, 2), pyridylmethoxy (3), or (dimethylamino)propoxy (4) chains were synthesized and quaternized at the substitutent nitrogen by treatment with methyl iodide at 35 degrees C over 3-6 h to give polyiodo salts, 5-8. Subsequent metathesis with LiN(SO(2)CF(3))(2) or NaBF(4) gave the respective ionic salts, 9-13. The amide salts, 9-12, were viscous liquids with pour points at 55-100 degrees C, and the tetrafluoroborate salt, 13, was a solid, mp 168 degrees C. The compositions of 2 and 5-13 were confirmed by elemental analysis and spectroscopic methods. Compounds 1, 2, and 4 were viscous liquids (d(25) = 1.67 g cm(-3); eta(25) = 0.76-1.56 mPa s(-1) ) with pour points at approximately 15 degrees C. The solid polyquaternary salts, 5-8, melted at 130-194 degrees C. The ionic liquids, 9-12, had an average density of approximately 1.73 g cm(-3) at 25 degrees C, and viscosities (25 degrees C) ranged between 68.3 and 139.2 mPa s(-1). A plot of the viscosities of 9-12 vs temperature revealed an almost linear correlation between 55 and 120 degrees C. Friction and wear properties of water with 0.25 wt % of 9-12 as boundary lubricant additives were evaluated on Si(3)N(4)/Si(3)N(4) ceramic interfaces. The most significant observation is that they caused a decrease in the running-in period.     

Potent and selective structure-based dibenzofuran inhibitors of transthyretin amyloidogenesis: kinetic stabilization of the native state

Transthyretin (TTR) amyloidogenesis requires rate-limiting tetramer dissociation and partial monomer denaturation to produce a misassembly competent species. This process has been followed by turbidity to identify transthyretin amyloidogenesis inhibitors including dibenzofuran-4,6-dicarboxylic acid (1). An X-ray cocrystal structure of TTR.1(2) reveals that it only utilizes the outer portion of the two thyroxine binding pockets to bind to and inhibit TTR amyloidogenesis. Herein, structure-based design was employed to append aryl substituents at C1 of the dibenzofuran ring to complement the unused inner portion of the thyroxine binding pockets. Twenty-eight amyloidogenesis inhibitors of increased potency and dramatically increased plasma TTR binding selectivity resulted. These function by imposing kinetic stabilization on the native tetrameric structure of TTR, creating a barrier that is insurmountable under physiological conditions. Since kinetic stabilization of the TTR native state by interallelic trans suppression is known to ameliorate disease, there is reason to be optimistic that the dibenzofuran-based inhibitors will do the same. Preventing the onset of amyloidogenesis is the most conservative strategy to intervene clinically, as it remains unclear which of the TTR misassembly intermediates results in toxicity. The exceptional binding selectivity enables these inhibitors to occupy the thyroxine binding site(s) in a complex biological fluid such as blood plasma, required for inhibition of amyloidogenesis in humans. It is now established that the dibenzofuran-based amyloidogenesis inhibitors have high selectivity, affinity, and efficacy and are thus excellent candidates for further pharmacologic evaluation.     

The glass transition time scale and configurational entropy in polymers: an experimental molecular view

We report direct experimental observation of local conformational dynamics in a polymer chain at the calorimetric glass transition temperature Tg. Variable-temperature two-dimensional (2D) solid-state exchange NMR, at natural abundance, reveals segmental dynamics in pure polyisobutylene (PIB) occurring on a time scale of several seconds over the Tg range observed by DSC (203-208 K). To our knowledge, this is the first direct observation of molecular-level conformer interchange (trans-trans/trans-gauche/gauche-gauche) at the caloric glass transition temperature. Our results provide a chronologically accurate and pedagogically advantageous demonstration of molecular processes during a polymer phase transition, relative to traditional bulk mechanical and calorimetric techniques. More importantly, we use a miscible blend to demonstrate a general strategy for quantitative evaluation of configurational entropy changes via combination of temperature-dependent 2D exchange NMR and Adams-Gibbs theory. Our results on the Tg time scale are directly relevant to fundamental understanding of the Tg length scale, i.e., the dimension of cooperatively rearranging regions.     

Synthesis and Hydrogen Bonding Capabilities of Biphenyl-Based Amino Acids Designed To Nucleate beta-Sheet Structure

The syntheses of 3'-(aminoethyl)-2-biphenylpropionic acid (1) and 2-amino-3'-biphenylcarboxylic acid (2) are described. These residues were designed to nucleate beta-sheet structure in aqueous solution when incorporated into small, amphiphilic peptides in place of the backbone of the i + 1 and i + 2 residues of the beta-turn. N-Benzyl-3'-(2-(benzylamido)ethyl)-2-biphenylpropamide (3) and N-benzyl-(2-benzylamido)-3'-biphenylamide (4) were synthesized and studied as model compounds to investigate the hydrogen-bonding capabilities of residues 1 and 2, respectively. The X-ray crystal structure of 3 indicates that a 13-membered intramolecular hydrogen-bonded ring is formed, while the remaining amide proton and carbonyl are involved in intermolecular hydrogen bonding. Infrared and variable-temperature NMR experiments indicate that, in solution (CH(2)Cl(2)), 3 exists as an equilibrium mixture of the 13- and the 15-membered intramolecularly hydrogen-bonded conformers with the 15-membered ring conformer being favored. Amide 4 was shown to exist in solution (CH(2)Cl(2)) as an equilibrium mixture of the 11-membered intramolecular hydrogen-bonded ring and a nonbonded conformation. No contribution from the 9-membered hydrogen-bonded ring conformation was observed. The X-ray crystal structure of 4 indicated the absence of intramolecular hydrogen bonding in the solid state.     

Continuous sample deposition from reversed-phase liquid chromatography to tracks on a matrix-assisted laser desorption/ionization precoated target for the analysis of protein digests

Peptide mass fingerprinting by matrix-assisted laser desorption/ionization (MALDI)-mass spectrometry (MS) is one of the standard high-throughput methods for protein identification today. Traditionally this method has been based on spotting peptide mixtures onto MALDI targets. While this method works well for more abundant proteins, low-abundance proteins mixed with high-abundance proteins tend to go undetected due to ion suppression effects, instrumental dynamic range limitations and chemical noise interference. We present an alternative approach where liquid chromatography (LC) effluent is continuously collected as linear tracks on a MALDI target. In this manner the chromatographic separation is spatially preserved on the target, which enables generation of off-line LC-MS and LC-MS/MS data by MALDI. LC-MALDI sample collection provides improved sensitivity and dynamic range, spatial resolution of peptides along the sample track, and permits peptide mass mapping of low-abundance proteins in mixtures containing high-abundance proteins. In this work, standard and ribosomal protein digests are resolved and captured using LC-MALDI sample collection and analyzed by MALDI-TOF-MS.     

Supramolecular assembly of lysine-b-glycine block copolypeptides at different solution conditions

Here we report the supramolecular assembly of poly(l-lysine)-b-polyglycine diblock copolypeptides at different solution conditions. Light scattering and confocal microscopy indicate that the supramolecular aggregates initially formed in solution are vesicles with a broad size distribution, depending strongly on the initial processing conditions. The vesicles formed after multiple pH cycles appear independent of the initial processing conditions and are related to the thermodynamic nature of the assembled supramolecular aggregates. Circular dichroism results verify that this change in size observed over pH cyclings tracks with the conformation changes of the lysine block confined in the vesicle membranes. This appears interesting for peptosome-based materials, implying a high level of fluidity in the membrane that allows the supramolecular aggregates formed in solution to respond to changes in pH. The results also show that the external stimulus, which is the change of pH in this study, provides an additional means to regulate polypeptide vesicle size and size distribution.