Polymer nanocomposites using zinc aluminum and magnesium aluminum oleate layered double hydroxides: Effects of the polymeric compatibilizer and of composition on the thermal and fire properties of PP/LDH nanocomposites

A series of five oleate-containing layered double hydroxides with varied ratios of zinc to magnesium, i.e., with the general formula Zn_2−yMg_yAl(OH)₆ [CH₃(CH₂)₇CHCH(CH₂)₇COO]·nH₂O, were synthesized and used to prepare nanocomposites of polypropylene (PP). The nanomaterials were characterized by elemental analysis, attenuated total reflection-infrared spectroscopy (ATR-IR), X-ray diffraction (XRD) and thermogravimetric analysis (TGA), while the composites were characterized by XRD, TGA, transmission electron microscopy (TEM) and cone calorimetry. The zinc-containing LDH showed better dispersion in the polymer at the micrometer level than did the magnesium-containing LDH while both are equally well-dispersed at the nanometer level. The magnesium-containing composites led to more thermally stable systems in TGA experiments, while the zinc systems gave greater reductions in heat release rate during combustion. Dispersion was also affected by the amount of PP-g-MA which was present. More PP-g-MA gave better dispersion and a significantly reduced peak heat release rate, i.e., enhanced fire performance.     

Transition metal-free amination of aryl halides—A simple and reliable method for the efficient and high-yielding synthesis of N-arylated amines

A simple and reliable reaction protocol for the clean, fast, and high-yielding synthesis of various N-arylated amines derived from reactions of aryl halides with various (also sterically hindered) amines under transition metal-free reaction conditions is presented. Dioxane and KN(Si(CH₃)₃)₂ were found to be the ideal solvent and base for this transformation. The conversion rates and yields observed are excellent and in the majority of the reactions performed significantly higher than that obtained in their catalyzed versions. Furthermore, the selective synthesis of 6-halopyridin-2-amines and asymmetric pyridine-2,6-diamines (derived from consecutive reactions of 2,6-dibromopyridine and 2,6-dichloropyridine, respectively, with different amines) is possible in almost quantitative yields (relative to 2,6-dihalopyridine) within very short reaction times. Purification of the 6-halopyridin-2-amine intermediates is not necessary, allowing the synthesis of pyridine-2,6-diamines in ‘one-pot’. However, catalysts are in many cases not required to efficiently and selectively couple aryl halides with amines, making transition metal-free versions of the Buchwald-Hartwig reaction extremely attractive for the synthesis of N-arylated amines with substrates containing substituents on the aryl halide, which either promote regioselectivity and/or do not require regioselective aminations.     

Simulation of vibrational dephasing of I(2) in solid Kr using the semiclassical Liouville method

In this paper, we present simulations of the decay of quantum coherence between vibrational states of I(2) in its ground (X) electronic state embedded in a cryogenic Kr matrix. We employ a numerical method based on the semiclassical limit of the quantum Liouville equation, which allows the simulation of the evolution and decay of quantum vibrational coherence using classical trajectories and ensemble averaging. The vibrational level-dependent interaction of the I(2)(X) oscillator with the rare-gas environment is modeled using a recently developed method for constructing state-dependent many-body potentials for quantum vibrations in a many-body classical environment [J. M. Riga, E. Fredj, and C. C. Martens, J. Chem. Phys. 122, 174107 (2005)]. The vibrational dephasing rates gamma(0n) for coherences prepared between the ground vibrational state mid R:0 and excited vibrational state mid R:n are calculated as a function of n and lattice temperature T. Excellent agreement with recent experiments performed by Karavitis et al. [Phys. Chem. Chem. Phys. 7, 791 (2005)] is obtained.     

Chemomechanics of surface stresses induced by DNA hybridization

When biomolecular reactions occur on one surface of a microcantilever beam, changes in intermolecular forces create surface stresses that bend the cantilever. While this phenomenon has been exploited to create label-free biosensors and biomolecular actuators, the mechanisms through which chemical free energy is transduced to mechanical work in such hybrid systems are not fully understood. To gain insight into these mechanisms, we use DNA hybridization as a model reaction system. We first show that the surface grafting density of single-stranded probe DNA (sspDNA) on a surface is strongly correlated to its radius of gyration in solution, which in turn depends on its persistence length and the DNA chain length. Since the persistence length depends on ionic strength, the grafting density of sspDNA can be controlled by changing a solution's ionic strength. The surface stresses produced by the reaction of complementary single-stranded target DNA (sstDNA) to sspDNA depend on the length of DNA, the grafting density, and the hybridization efficiency. We, however, observe a remarkable trend: regardless of the length and grafting density of sspDNA, the surface stress follows an exponential scaling relation with the density of hybridized sspDNA.     

Synthesis of lariat ether carboxylic acids based on dibenzo‐16‐crown‐5

Synthetic routes to forty‐seven dibenzo‐16‐crown‐5 compounds with pendant carboxylic acid groups are reported. When taken together with previously described lariat ether carboxylic acids, these new compounds provide several series with systematic structural variations including changes in the identity and attachment site(s) of one or more lipophilic groups and the length of the spacer that connects the carboxylic acid group to the polyether framework.     

Biosensor immunoassay of ivermectin in bovine milk

A rapid and sensitive biosensor immunoassay was developed for determination of ivermectin residues in bovine milk. A detection limit of 16.2 ng/mL was achieved. A Biacore optical biosensor based on surface plasmon resonance was used, and a range of extraction techniques was investigated. In the final assay procedure, ivermectin was extracted with acetonitrile followed by C8 solid-phase extraction cleanup. It was proven experimentally that 2 methods of milk storage, freezing or addition of mercury-containing compounds as preservatives, could be used without considerable change in detected concentrations (samples were fortified with ivermectin after storage). The average values for milk samples spiked at 100 and 50 ng/mL concentrations were 102.6 and 51.5 ng/mL, respectively. Extraction and analysis of 20 milk samples were performed within a single working day.     

Etude des volumes specifiques partiels de polystyrenes-modeles—Influence de la masse moleculaire et de la nature des groupements terminaux

It is well known that the apparent specific volume η₂ of a polymer may be expressed by the following relationship: $\text{η}{}_2\text{= η}{}_{\mathrm{m}}\text{+ K/}\text{M}{}_{\mathrm{n}}$ where M?_n is the number-average molecular weight of the polymer, η_m the specific volume of the infinite polymer, and K a constant. We have shown that this relationship is valid for low molecular weight polystyrenes ($\text{M}{}_{\mathrm{n}}\text{< 4·10}{}^4$) with different end-groups, independently of the nature of the solvent. The K values (and variations with the solvent and with the nature of the end-groups) may be predicted through simple calculations proposed here. We conclude that η_m does not represent the specific volume of the infinite polymer, since we observe a rapid decrease of η₂ for increasing M (when $\text{M}{}_{\mathrm{n}}\text{< 4·10}{}^4$). The decrease is much greater than expected from the relationship $\text{η}{}_2\text{= ? (1/}\text{M}\text{)}$.     

A quantum-chemical study of the structure, vibrations and SiH bond properties of disilylamine, NH(SiH3)2

Quantum-chemical calculations at HF, MP2 and B3LYP levels with 6-31G* and 6-311G** basis sets are reported for disilylamine, NH(SiH3)2. The equilibrium structure is found to vary with both level and basis set, all but one of the structures exhibiting a small lack of planarity of the HNSi2 system. The barrier to inversion, however, is found to be very low, at most 38 cm(-1). Vibration frequencies and intensities are calculated. The frequencies are scaled, where possible, either using updated infrared data or with the aid of factors transferred from N(CH3)(SiH3)2. Unobserved frequencies due to the v(s)NSi2, deltaNSi2 and delta(perpendicular)NH modes are predicted near 610, 210 and 360 cm(-1), respectively. The lower silyl torsion lies below 40 cm(-1). The appearance of a single broad vSiH band in gas-phase samples of both NH(SiH3)2 and NH(SiH3)(SiD3) is suggestive of signal averaging due to internal rotation. The frequencies v(is)SiH, infrared intensities and Raman scattering activities of the bands due to an isolated SiH bond in an otherwise deuterated species are calculated and correlated with the torsional angle of this bond and with the Mulliken charge on the hydrogen atom. The strength of the bond is a minimum, and the infrared intensity and Raman scattering activity are maxima, when the bond direction is roughly orthogonal to the skeletal plane. A major part of the frequency and intensity variations is attributed to n(p)(N)-sigma*(Si-H)) hyperconjugation which, NBO calculations show, reaches a maximum for this conformation. However, systematic smaller variations are found for SiH bonds lying in the skeletal plane, which reflect the proximity of the other silyl group and only partly correlate with Mulliken charge. vSiH-vSiH interaction force constants, f', are calculated for pairs of SiH bonds in different silyl groups and compared with the corresponding dipole-dipole potential energy, the latter calculated using a classical treatment of the interaction between point dipoles arising from delta mu/delta r for the SiH bonds involved. The gradient of the correlation is very close to that expected from the theory, but a negative intercept indicates the presence of additional factors.