Structural characterization of a zinc(II) complex of a tris(oxime)amine ligand

The ligand tris(1-propan-2-onyl oxime)amine (TRISOXH₃) binds to zinc(II) acetate as a tridentate N₃ donor, with a third oxime group remaining unbound and extending into the crystal lattice. The crystal structure shows a distorted trigonal bipyramidal geometry around the zinc center. An intramolecular hydrogen bonding interaction between a coordinated oxime donor and an oxygen of a bound acetate is observed. This structure is similar to that of a previously reported zinc(II) complex of a related bis(oxime)amine ligand. However, the structure of Zn(TRISOXH₃)(OAc)₂ is different in ligand coordination mode and metal coordination number from those of the previously reported complexes Ni(TRISOXH₃)Cl₂ or [Ni(TRISOXH₃)(NO₃)(H₂O)]NO₃.     

Orbital-Overlap control in the solid-state reactivity of beta-azido-propiophenones: selective formation of cis-azo-dimers

Solid-state photolysis of 1a,b yields selectively cis-3a,b. X-ray analysis of 1a,b reveals the molecules adopt an extended structure and as such the crystal packing arrangement consists of planar, pi-stacked molecules. The shortest intermolecular distance between adjacent N-atoms is approximately 3.76 A and would lead to formation of trans-3a,b, whereas cis-3a,b is formed by dimerization between N-atoms that are approximately 3.9 A apart. We propose that the molecular orbital alignment of the adjacent nitrenes controls the solid-state reactivity.     

A Triphenylphosphine-Based Microporous Polymer for a Wittig Reaction Cycle in the Solid State

The Wittig reaction is a key step in industrial processes to synthesise large quantities of vitamin A and various other important chemicals that are used in daily life. This article presents a pathway to achieve the Wittig reaction in a solid network. A highly porous triphenylphosphine-based polymer was applied as a solid Wittig reagent that undergoes, in a multi-step cycle, in total six post-synthetic modifications. This allowed for regeneration of the solid Wittig reagent and reuse for the same reaction cycle. Of particular industrial relevance is that the newly developed material also enables a simple way of separating the product by filtration. Therefore, additional costly and difficult separation and purification steps are no longer needed.     

Formation of trioctylamine from octylamine on Au(111)

The adsorption of octylamine on Au(111) under ultrahigh vacuum conditions is investigated. The molecules surprisingly undergo a thermally activated chemical reaction, resulting in formation of trioctylamine as confirmed both by X-ray photoelectron spectroscopy (XPS) and by comparison to the scanning tunneling microscopy (STM) signature of trioctylamine deposited directly onto the surface.     

Structure of a crystalline vapochromic platinum(II) salt

Square-planar cations of the orange form of [Pt(Me2bzimpy)Cl](PF6) x DMF [Me2bzimpy = 2,6-bis(N-methylbenzimidazol-2-yl)pyridine] stack along the b axis in a head-to-tail arrangement with short interplanar spacings (3.35 and 3.39 A). Long intermolecular Pt...Pt contacts [4.336(2) and 4.565(2) A] and comparatively short Me2bzimpy...Me2bzimpy distances are consistent with spectroscopic measurements for orange salts of Pt(Me2bzimpy)Cl+. The DMF solvent molecules line channels parallel to c, which may provide a conduit for vapor absorption. The crystals are vapochromic, changing from orange to violet upon exposure to acetonitrile vapor. The changes in spectroscopic properties accompanying vapor absorption are consistent with changes in intermolecular interactions between complexes.     

Development and application of immunoaffinity column chromatography for atrazine in complex sample media

A rabbit antibody immunoaffinity (IA) column procedure was evaluated as a cleanup method for the determination of atrazine in soil, sediment, and food. Four IA columns were prepared by immobilizing a polyclonal rabbit anti-atrazine antibody solution to HiTrap Sepharose columns. Atrazine was bound to the IA columns when the loading solvents were either 100% water, 2% acetonitrile in water, or 10% methanol in phosphate buffered saline (PBS). Quantitative removal of atrazine from the IA columns was achieved with elution solvents of either 70% ethanol in water, 70% methanol in water, or 100% methanol. One control column was prepared using nonspecific rabbit IgG antibody. This control column did not retain any applied atrazine indicating atrazine did not bind indiscriminately to protein or the Sepharose support. The four IA columns showed reproducible coupling efficiency for the immobilization of the atrazine antibody and consistent binding and releasing of atrazine. The coupling efficiency (4.25 mg of antibody in 1 mL of resin bed) for the four IA columns ranged from 93 to 97% with an average of 96 ± 2% (2.1%). Recoveries of the 500, 50, and 5 ng mL⁻¹ atrazine standard solutions from the four IA columns were 107 ± 7% (6.5%), 122 ± 14% (12%), and 114 ± 9% (8.0%) respectively, based on enzyme-linked immunosorbent assay (ELISA) data. The maximum loading was approximately 700 ng of atrazine for each IA column (∼0.16 μg of atrazine per mg of antibody). The IA columns could withstand 100% methanol as the elution solvent and could be reused more than 50 times with no change in performance. The IA columns were challenged with soil, sediment, and duplicate-diet food samples and effectively removed interferences from these various matrices for subsequent gas chromatography/mass spectrometry (GC/MS) or ELISA analysis. The log-transformed ELISA and GC/MS data were significantly correlated for soil, sediment and food samples although the ELISA values were slightly higher than those obtained by GC/MS. The IA column cleanup procedure coupled with ELISA analysis could be used as an alternative effective analytical method for the determination of atrazine in complex sample media such as soil, sediment, and food samples.     

“Alternative medical therapy” use among singers: Prevalence and implications for the medical care of the singer

Singers are extremely conscious of health problems that affect their voices and well-being and often take an active role in seeking care for these problems. They frequently seek treatment from providers or with modalities considered “alternative” to traditional medical care. A survey of singers was completed to elucidate their attitudes and practices regarding “alternative modalities” of medical care. Frequently singers will self-medicate or take advice from people not well versed in the special needs of a professional voice user. They will fail to share this information with the physician when seeking “traditional” medical care. These practices may predispose the singer to suboptimal or even dangerous care. These results are discussed, as well as the implications for the medical physician treating the singer. The possible detrimental pharmacologic effects of “natural therapies” widely used by singers are presented, with special attention to the particular concerns for the professional singer     

Photocycloaddition of 2-Oxopyran-3-carbonitriles to 2,3-Dimethylbut-2-ene

On acetone-sensitized irradiation in the presence of 2,3-dimethylbut-2-ene, α-cyano-α,β-unsaturated δ-lactone 5 is converted both to cyclopentapyrans resulting from stepwise addition of the alkene to the olefinic C(β)- and the nitrile C-atom of triplet excited 5 , and cyclobutapyranes, i.e., [2+2] cycloadducts. Similarly, direct irradiation of 1-benzopyran-3-carbonitrile 6 in the presence of the same alkene affords cyclobutabenzopyran 13 and cyclopentabenzopyran 14 , the latter resulting from an upper excited triplet state of 6 .     

Development of enzyme-linked immunosorbent assays for the detection of deacetoxycephalosporin C and isopenicillin N synthase activity

Although there are a number of existing assays for monitoring the activity of both isopenicillin N synthase (IPNS) and deacetoxycephalosporin C synthase (DAOCS), none have demonstrated the qualities required for screening a mutant library. Hence, enzyme-linked immunosorbent assays (ELISAs) for IPNS and DAOCS were developed based on the detection of the catalytic turnover products isopenicillin N and cephalexin/phenylacetyl-7-aminodeacetoxycephalosporanic acid (G-7-ADCA), respectively. These assays are relatively fast compared to existing assays, such as the hole-plate bioassay, and are amenable with high-throughput screening. Both the IPNS and DAOCS-ELISAs were optimised for use with crude protein extracts rather than purified protein, thereby eliminating any additional time required for purification. The ELISA developed for the detection of cephalexin had an IC₅₀ value of 154 ± 9 ng mL⁻¹ and LOD of 7.2 ± 2.2 ng mL⁻¹ under conditions required for the assay. Good recoveries and correlation was observed for spiked samples when the concentration of crude protein was kept below 1 mg mL⁻¹. The DAOCS-ELISA was found to have increased sensitivity compared to the hole-plate bioassay (10.3 μg mL⁻¹). The IPNS-ELISA did not significantly increase the sensitivity (approximately 5 μg mL⁻¹) compared to that of the hole-plate bioassay (16 μg mL⁻¹) for isopenicillin N. The minimum amount of crude protein extract required for producing detectable amounts of product for both assays was below 0.5% of the maximum amount of protein that the assay could contain without any effect on the ELISA. This suggests that when screening a mutant library, mutants producing low amounts of the product could still be detected using these assays.