Development of a universal constant rate thermal analysis system for being used with any thermoanalytical instrument

The SCTA method implies to control the temperature in such a way that the reaction rate changes with the time according to a function previously defined by the user. Constant Rate Thermal Analysis (CRTA) is one of the most commonly used SCTA methods and implies achieving a temperature profile at which the reaction rate remains constant all over the process at a value previously selected by the user. This method permits to minimize the influence of heat and mass transfer phenomena on the forward reaction. The scope of this work is to develop a universal CRTA temperature controller that could be adapted to any thermoanalytical device. The thermoanalytical signal is programmed to follow a preset linear trend by means of a conventional controller that at the time controls a second conventional temperature programmer that forces the temperature to change for achieving the trend programmed for the thermoanalytical signal. Examples of the performance of this control system with a Thermobalance and a Thermomechanical Analyser (TMA) are given.     

Polarization dynamics of longitudinally monomode bipolarized microchip solid-state lasers

This paper is devoted to the polarization dynamics of a longitudinally monomode bipolarized Nd:YAG laser: the low-frequency polarization dynamics of a microchip laser is studied experimentally and theoretically. The intensities and the relaxation oscillation spectrum of orthogonally polarized modes versus the direction of pump polarization is observed. A phase-sensitive model of a longitudinally monomode bipolarized solid-state laser with linear polarized diode laser pump is developed to account for the experimental observations.     

Recycling in telomerization of butadiene with D‐xylose: Pd(TPPTS)n‐KF/Al2O3 as an active catalyst

A palladium‐TPPTS catalyst heterogenized on KF/alumina has been shown to be effective and recyclable for the selective formation of monooctadienylxylopyranosides via the telomerization of butadiene with D ‐xylose. Copyright © 2007 John Wiley & Sons, Ltd.     

Elastic instability of the nano-structured state as an intrinsic probe to study the early formation stages of sol–gel derived (Pb<Subscript>1-x</Subscript>Ca<Subscript>x</Subscript>)TiO<Subscript>3</Subscript> thin films

A novel method to investigate the early formation stages of polycrystalline (Pb_1-xCa_x)TiO₃ (PCT) perovskite films by means of traditional Brillouin and micro-Brillouin spectroscopy (BS, mBS) is described in the present work. The films were prepared by chemical solution deposition (CSD) onto oxidized (100)Si substrates and treated at temperatures between 350–650 °C by rapid thermal processing (RTP). The elastic instability observed by Brillouin spectroscopy at the nano-structured state of the PCT films was used here to determine their crystallization temperatures. Coexistence of different nanocrystalline phases (e.g., pyrochlore, perovskite) in the films could also be detected by this technique. The reliability of these results is demonstrated by complementary information obtained by X-ray diffraction (XRD) and scanning force microscopy (SFM). The effects of the annealing temperature and of the Ca²⁺ content on the crystallization process of these films are also discussed. PACS 78.35.+c; 77.84.-s; 61.82.Rx     

Iterative methods and high-order difference schemes for 2D elliptic problems with mixed derivative

We derive a fourth-order compact finite difference scheme for a two-dimensional elliptic problem with a mixed derivative and constant coefficients. We conduct experimental study on numerical solution of the problem discretized by the present compact scheme and the traditional second-order central difference scheme. We study the computed accuracy achieved by each scheme and the performance of the Gauss-Seidel iterative method, the preconditioned GMRES iterative method, and the multigrid method, for solving linear systems arising from the difference schemes.     

Linear theory of wave generation by a moving bottom

The computation of long wave propagation through the ocean obviously depends on the initial condition. When the waves are generated by a moving bottom, a traditional approach consists in translating the ‘frozen’ sea bed deformation to the free surface and propagating it. The present study shows the differences between the classical approach (passive generation) and the active generation where the bottom motion is included. The analytical solutions presented here exhibit some of the drawbacks of passive generation. The linearized solutions seem to be sufficient to consider the generation of water waves by a moving bottom. To cite this article: D. Dutykh et al., C. R. Acad. Sci. Paris, Ser. I 343 (2006).     

Rheological properties of binary associating polymers

Dynamics of associating polymer solutions above the reversible gelation point are studied. Each macromolecule consists of a soluble backbone (B) and a small fraction of specific strongly interacting groups (A or C stickers) attached to B. A mixture of B–A and B–C associating polymers with 1:1 stoichiometric ratio is considered. As a result of AC association, the polymers reversibly gelate above the overlap concentration. It is shown that (1) the network strands are linear complexes (double chains) of B–A and B–C; (2) “diffusion” of the network junction points is characterized by an apparent activation energy, which can be significantly higher than the energy of one AC bond; (3) most importantly, the randomness of sticker distribution along the chain can significantly slow down the network relaxation leading to a markedly non-Maxwellian viscoelastic behavior. The theory elucidates the most essential features of rheological behavior of polysaccharide associating systems (with A = adamantyl moiety, C = β-cyclodextrin, B = either chitosan or hyaluronan) including similar behavior of G ^′ and G ^″ in a wide frequency range, strong temperature dependence of the characteristic frequency ω _x , and an extremely strong effect of added free stickers (fC) on the dynamics. This paper was presented at Annual European Rheology Conference (AERC) held in Hersonisos, Crete, Greece, April 27–29, 2006.     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

Etude structurale des sulfotellurures de terres rares (LS)2Te1+x (L = Tb,Dy, Ho,Er, Tm et Y). I. Sous-structure de la phase ordonnée de (HoS)2Te1,34. Structure de la phase desordonnée de (TbS)2Te

The lanthanide sulfotellurides (LS)₂Te_1+x (0 ≤ x < 0.50) show order-disorder phenomena. Above 450°C, they crystallize in a partially disordered structure, orthorhombic with cell parameters a, b, and c close to 4.1, 5.2, and 13.6 Å, respectively. This structure is determined from diffractometer data on a (HoS)₂Te_1.34 crystal (R = 0.061). It is built up along the c axis from (L₄S) tetrahedra layers, separated by Te planes. Disorder and nonstoichiometry are related to the two vacant Te sites.