Optically implemented broadband blueshift switch in the terahertz regime

We experimentally demonstrate, for the first time, an optically implemented blueshift tunable metamaterial in the terahertz (THz) regime. The design implies two potential resonance states, and the photoconductive semiconductor (silicon) settled in the critical region plays the role of intermediary for switching the resonator from mode 1 to mode 2. The observed tuning range of the fabricated device is as high as 26% (from 0.76 THz to 0.96 THz) through optical control to silicon. The realization of broadband blueshift tunable metamaterial offers opportunities for achieving switchable metamaterials with simultaneous redshift and blueshift tunability and cascade tunable devices. Our experimental approach is compatible with semiconductor technologies and can be used for other applications in the THz regime.     

Glycerol and glycerol carbonate as ultraviscous solvents for mixture analysis by NMR

NMR of weakly polar analytes in an apolar ultraviscous solvent has recently been proposed for mixture analysis as a pertinent alternative to the DOSY experiment. The present article reports the first use of glycerol and glycerol carbonate as polar solvents for the NMR analysis of a model mixture of dipeptides. This work demonstrates the high potentiality of these solvents for the analysis of mixtures made of polar and potentially bioactive compounds. Medium-sized molecules slowly reorient in glycerol and glycerol carbonate under particular temperature conditions, so that solute resonances may show spin diffusion in NOESY spectra, thus opening the way to mixture analysis. Glycerol and glycerol carbonate have turned out to be ultraviscous solvents of choice for the individualization of four structurally close mixed dipeptides: Leu-Val, Leu-Tyr, Gly-Tyr and Ala-Tyr by means of 1D and 2D NOESY experiments. Selective sample excitation and signal detection were implemented to eliminate the intense proton signals of the non-deuterated solvents. Moreover, the recording of a multiplet selective 2D NOESY-TOCSY has shown that the analytical power of NMR in highly viscous solvents is not limited to the extraction of mixture component 1D subspectra but may also yield some supplementary information about atom connectivity within components.     

Magnetic resonance imaging of acoustic streaming: absorption coefficient and acoustic field shape estimation

In this study, magnetic resonance imaging (MRI) is used to visualize acoustic streaming in liquids. A single-shot spin echo sequence (HASTE) with a saturation band perpendicular to the acoustic beam permits the acquisition of an instantaneous image of the flow due to the application of ultrasound. An average acoustic streaming velocity can be estimated from the MR images, from which the ultrasonic absorption coefficient and the bulk viscosity of different glycerol-water mixtures can be deduced. In the same way, this MRI method could be used to assess the acoustic field and time-average power of ultrasonic transducers in water (or other liquids with known physical properties), after calibration of a geometrical parameter that is dependent on the experimental setup.     

The use of Herschel–Quincke tubes to improve the efficiency of lined ducts

The scattering matrix results of Herschel–Quincke (HQ) resonators installed in combination with an acoustic liner (HQ-Liners) are presented in this paper. This approach aims at controlling both tonal and broadband noise to improve the liner efficiency. It uses circumferential arrays of Herschel–Quincke tubes on a main duct in a serial association with a locally reacting liner of known impedance. Results for the scattering matrix of this system are deduced from an analytical model and compared with experimental and numerical data showing a good agreement. Analysis of the scattering matrix coefficients points out the modal conversion properties that depend on the number of HQ tubes along the circumference. Results of the transmission loss show that the choice of an optimal HQ configuration with respect to the liner properties can substantially improve the liner efficiency.     

Collisional parameters of H2O lines: effects of vibration

A complex semiclassical model for the calculation of line widths and shifts of H₂O broadened by N₂, derived from the Robert and Bonamy approach, is tested by comparisons with measurements for selected transitions in various vibrational bands. The lines retained, which involve rotational states with Kc=J or J−1 have been chosen for two reasons. The first is that they show large variations of the widths with J and thus enable a severe test of the model. The second is that, as explained in this paper, they are well-suited for the study of the effects of vibration on the collisional parameters. The measured values have been extracted from an updated version of a database built years ago (JQSRT 52 (1994) 481) that contains all available measurements. Comparisons between experimental and calculated widths and shifts at room temperature illustrate the quality of the model and clearly demonstrate, for the first time, that there is a vibrational dependence of the broadening. Values of collisional parameters are first studied in fundamental bands. This shows that the theoretical approach accounts for most of the dependence of broadening and shifting on rotational quantum numbers: the variations of γ, which reach a factor of nearly 20 from low to high J values, are correctly accounted for by the model as are some specific features of the shifts δ. Analysis confirms that the bending and stretching vibrations have significantly different effects on δ, due to the vibrational dependence of the intermolecular potential. On the other hand, differences on the widths are rather small with slightly smaller broadening for lines of the bending band. Calculations show that there is a spectroscopic effect, due to the larger rotational constant A in the v₂=1 state. Calculations made for overtone bands involving numerous quanta of the stretching vibration are then presented. They predict that a significant dependence of the width should be observed for high J lines due to the effect of vibration on the interaction potential. This is confirmed by comparisons with measurements for lines involving a change of three and four quanta of stretching vibration.     

Stepwise and concerted electron-transfer/bond breaking reactions. solvent control of the existence of unstable pi ion radicals and of the activation barriers of their heterolytic cleavage

Available data from various sources seem to indicate an important role of solvation in the cleavage rates of intermediate pi ion radicals, in the passage from concerted to stepwise electron-transfer/bond breaking reaction pathways and even in the very existence of pi ion radicals. After preliminary computations treating the solvent as dielectric continuum, these expectations are examined with the help of a simple model system involving the anion radical of ONCH(2)Cl and two molecules of water, which allows the application of advanced computational techniques and a treatment of these solvent effects that emphasizes the role of solvent molecules that sit close to the charge centers of the molecule. A pi ion radical minimum indeed appears upon introduction of the two water molecules, and cleavage is accompanied by their displacement toward the leaving anion, thus offering a qualitative mimicry of the experimental observations.     

Ultrafast dynamics of acetylacetone (2,4-pentanedione) in the S2 state

The dynamics of the enolic form of acetylacetone (E-AcAc) was investigated using a femtosecond pump-probe experiment. The pump at 266 nm excited E-AcAc in the first bright state, S2(pi pi*). The resulting dynamics was probed by multiphoton ionization at 800 nm. It was investigated for 80 ps on the S2(pi pi*) and S1(n pi*) potential energy surfaces. An important step is the transfer from S2 to S1 that occurs with a time constant of 1.4 +/- 0.2 ps. Before, the system had left the excitation region in 70 +/- 10 fs. An intermediate step was identified when E-AcAc traveled on the S2 surface. Likely, it corresponds to an accidental resonance in the detection scheme that is met along this path. More importantly, some clues are given that an intramolecular vibrational energy relaxation is observed, which transfers excess vibrational energy from the enolic group O-H to the other modes of the molecule. The present multistep evolution of excited E-AcAc probably also describes, at least qualitatively, the dynamics of other electronically excited beta-diketones.     

Evidence for concerted proton-electron transfer in the electrochemical oxidation of phenols with water as proton acceptor. Tri-tert-butylphenol

Proton-coupled electron transfer oxidation of phenols play a prominent role in several natural processes, and one may wonder if their high efficiency is related to the possibility that the electron and proton transfer steps are concerted. The cyclic voltammetric observation of the electrochemical oxidation and reverse reaction has allowed, with the example of 2,4,6-tri-tert-butylphenol in nonbuffered aqueous media, the clear identification of a pathway in which a phenol is directly and reversibly converted into the phenoxyl radical while the generated proton is accepted by a water molecule in a concerted manner. In very basic media, a stepwise mechanism takes place in which the phenol is deprotonated by OH- and the resulting phenoxide ion rapidly oxidized into the phenoxyl radical. As the pH decreases, this pathway progressively shuts down to the advantage of the concerted pathway. The latter assignment is confirmed by the observation of a substantial H/D kinetic isotope effect. At moderately basic pH 10.5, the contributions of the two pathways are about equal and the occurrence of the two competing routes is directly visualized in the cyclic voltammetry response.     

A finite element finite-strain formulation for modeling colliding blocks of Gent materials

The present paper is devoted to the analysis of the contact/impact problems with Coulomb friction and large deformation between two hyperelastic bodies of Gent model. The total Lagrangian formulation is adopted to describe the geometrically non-linear behavior. For the finite element implementation, the explicit expression of the incremental law of Gent model is derived. A first order algorithm is applied for the numerical integration of the time-discretized equation of motion. Efficiency and accuracy of the resulting method is illustrated on a two-dimensional static contact problem and a three-dimensional dynamic contact problem as compared with ANSYS simulations.