Towards a human repertoire of monocytic lysosomal proteins

The lysosomal compartment of human monocytic cells has never been investigated by a proteomic approach. By a combination of one-dimensional (1-D) and two-dimensional (2-D) gel electrophoresis, protein identification by N-terminal sequencing, matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) peptide mass fingerprinting and tandem mass spectrometry (MS/MS) peptide sequence analysis, we initiated an exhaustive study of the human lyososomal proteome, which aims at establishing a 2-D reference map of human soluble lyososomal proteins. Human monocytic U937 cells were induced to secrete lysosomal soluble hydrolases by addition of NH4Cl in the culture medium. Since lysosomal soluble proteins are characterized by the presence of mannose-6-phosphate, they were purified on an affinity support bearing mannose-6-phosphate receptor. Analysis of the purified fraction led to the preliminary identification of fifteen proteins, among which twelve are well-known lysosomal hydrolases, one is assumed to be lysosomal on the basis of sequence homology to cysteine proteinases of the papain family, and two (leukocystatin and the human cellular repressor of E1A-stimulated genes) are described here for the first time as mannose-6-phosphate-containing proteins.     

Phosphotriesterase: A complementary tool for the selective detection of two organophosphate insecticides: Chlorpyrifos and chlorfenvinfos

This work shows the possibility of combining the high sensitivity of genetically-modified Drosophila melanogaster acetylcholinesterase (B394) with the ability of phosphotriesterase (PTE) to hydrolyse organophosphate compounds, in the aim of developing a biosensor selective to two insecticides of interest: chlorpyrifos and chlorfenvinfos. The studies clearly demonstrate that chlorfenvinfos is a substrate that acts as competitive inhibitor of PTE, therefore preventing the efficient hydrolysis of other pesticides, including chlorpyrifos. A bi-enzymatic sensor was designed by immobilizing both B394 and PTE in a polyvinylalcohol matrix. The sensor was shown to be able to discriminate between chlorpyrifos and chlorfenvinfos inhibitions.     

Convergent Vector and Hermite Subdivision Schemes

Hermite subdivision schemes have been studied by Merrien, Dyn, and Levin and they appear to be very different from subdivision schemes analyzed before since the rules depend on the subdivision level. As suggested by Dyn and Levin, it is possible to transform the initial scheme into a uniform stationary vector subdivision scheme which can be handled more easily.With this transformation, the study of convergence of Hermite subdivision schemes is reduced to that of vector stationary subdivision schemes. We propose a first criterion for C⁰-convergence for a large class of vector subdivision schemes. This gives a criterion for C¹-convergence of Hermite subdivision schemes. It can be noticed that these schemes do not have to be interpolatory. We conclude by investigating spectral properties of Hermite schemes and other necessary/sufficient conditions of convergence.     

Biosensors to detect marine toxins: Assessing seafood safety

This article describes the different types of marine toxins and their toxic effects, and reviews the bio/analytical techniques for their detection, putting special emphasis to biosensors. Important health concerns have recently appeared around shellfish (diarrheic, paralytic, amnesic, neurologic and azaspiracid) and fish (ciguatera and puffer) poisonings produced by different types of phycotoxins, making evident the urgent necessity of counting on appropriate detection technologies. With this purpose, several analysis methods (bioassays, chromatographic techniques, immunoassays and enzyme inhibition-based assays) have been developed. However, easy-to-use, fast and low-cost devices, able to deal with complicated matrices, are still required. Biosensors offer themselves as promising biotools, alternative and/or complementary to conventional analysis techniques, for fast, simple, cheap and reliable toxicity screening. Nevertheless, despite the wide range of seafood toxins and the already rooted biosensing systems, the literature on biosensors for phycotoxins is scarce. This article discusses the existing biosensor-based strategies and their advantages and limitations. Finally, the article gives a general overlook about the regulation toxin levels and monitoring programmes currently established around the world concerning seafood safety.     

Thermal optimization of 1.55 μm OP-VECSEL with hybrid metal–metamorphic mirror for single-mode high power operation

We report on the thermal design and the characterization of InP-based 1.55 μm wavelength large diameter (～100 μm) optically pumped vertical external cavity surface emitting lasers (OP-VECSELs). The device is thermally optimized for high power ( > 70 mW) room-temperature (RT) continuous-wave (CW) single-mode operation. Efficient bottom heat dissipation in the 1/2-VCSEL chip is obtained thanks to the use of a hybrid metal– metamorphic GaAs/AlAs mirror integrated to the InP-based active region, and to subsequent soldering on a SiC substrate. A single-mode output power of 77mW is obtained under CW-RT laser operation, limited by the pump power. Moreover thermal simulations and characterizations of the 1/2-VCSEL chip show that even higher power could be obtained at higher pumping levels, using a CVD diamond substrate.     

Delivery by shock waves of active principle embedded in gelatin-based capsules

PURPOSE: Delivering a drug close to the targeted cells improves its benefit versus risk ratio. A possible method for local drug delivery is to encapsulate the drug into solid microscopic carriers and to release it by ultrasound. The objective of this work was to use shock waves for delivering a molecule loaded in polymeric microcapsules. MATERIAL AND METHODS: Ethyl benzoate (EBZ) was encapsulated in spherical gelatin shells by complex coacervation. A piezocomposite shock wave generator (120 mm in diameter, focused at 97 mm, pulse length 1.4 micros) was used for sonicating the capsules and delivering the molecule. Shock parameters (acoustic pressure, number of shocks and shock repetition frequency) were varied in order to measure their influence on EBZ release. A cavitation-inhibitor liquid (Ablasonic) was then used to evaluate the role of cavitation in the capsule disruption. RESULTS: The measurements showed that the mean quantity of released EBZ was proportional to the acoustic pressure of the shock wave (r2 > 0.99), and increased with the number of applied shocks. Up to 88% of encapsulated EBZ could be released within 4 min only (240 shocks, 1 Hz). However, the quantity of released EBZ dropped at high shock rates (above 2Hz). Ultrasound imaging sequences showed that cavitation clouds might form, at high shock rates, along the acoustic axis making the exposure inefficient. Measurements done in Ablasonic showed that cavitation plays a major role in microcapsules disruption. CONCLUSIONS: In this study, we designed polymeric capsules that can be disrupted by shock waves. This type of microcapsule is theoretically a suitable vehicle for carrying hydrophobic drugs. Following these positive results, encapsulation of drugs is considered for further medical applications.     

Proton NMR spectroscopy and magnetic properties of a solution-stable dicopper(II) complex bearing a single mu-hydroxo bridge

The reaction of copper(II) perchlorate with the macrocyclic ligand [22]py4pz in the presence of base leads to formation of a dinuclear complex [Cu(2)([22]py4pz)(mu-OH)](ClO(4))(3)xH(2)O, in which two copper ions are bridged by a single mu-hydroxo bridge. Each copper ion is further surrounded by four nitrogen atoms of the ligand. The mu-hydroxo bridge mediates a strong antiferromagnetic coupling (2J = -691(35) cm(-1)) between the metal centers, leading to relatively sharp and well-resolved resonances in the (1)H NMR spectrum of the complex in solution. We herein report the crystal structure, the magnetic properties, and the full assignment of the hyperfine-shifted resonances in the NMR spectrum of the complex, as well as the determination of the exchange coupling constant in solution through temperature-dependent NMR studies.     

Development of acrylate-based monolithic stationary phases for electrochromatographic separations

Organic monolithic stationary phases were synthesized in fused-silica capillaries. They were prepared by in situ polymerization under UV irradiation of various alkyl acrylates, 1,3-butanediol diacrylate, and 2-acrylamido-2-methyl-1-propanesulfonic acid in a ternary porogenic solvent. The resulting stationary phases were tested in CEC. The influence of UV irradiation energy on the resulting separative performances of the monoliths was studied. It was thus demonstrated that the use of hexyl acrylate rather than butyl acrylate and lauryl methacrylate gives highly efficient monoliths (more than 300 000 plates per meter) with optimized EOF. It was also confirmed that the mobile phase ionic strength may affect significantly the separation efficiency. The influence of the nature of the mobile phase organic modifier (ACN or methanol) on EOF, retention, efficiency, and selectivity was studied and differences were observed. Finally, the performances of monolithic stationary phases developed and optimized for CEC separations were evaluated in nanoLC.     

Use of self assembled magnetic beads for on-chip protein digestion

The use of grafted trypsin magnetic beads in a microchip for performing protein digestion is described. The PDMS device uses strong magnets to create a magnetic field parallel to the flow with a strong gradient pointing through the center of the chip channel. This allows for the formation of a low-hydrodynamic resistance plug of magnetic trypsin beads that serves as a matrix for protein digestion. This device represents an inexpensive way of fabricating a multi open-tubular-like column with an appropriate pore size for proteins. Kinetics studies of the hydrolysis of a model peptide show a 100-fold increase in digestion speed obtained by the microsystem when compared to a batch wise system. This system also offers the great advantage of easy replacement, as the bead matrix is easily washed out and replaced. High performance and reproducibility for digesting recombinant human growth hormone are confirmed by analysing the digest products in both CE and MALDI-TOF MS. Similar sequence coverage (of about 44%) is obtained from MS analysis of products after 10 minutes on-chip and 4 h with soluble trypsin in bulk.