Comparison of the site occupancies determined by combined Rietveld refinement and density functional theory calculations: example of the ternary Mo-Ni-Re σ phase

The site occupancies of the Mo-Ni-Re σ phase have been studied as a function of the composition in the ternary homogeneity domain by both experimental measurements and calculations. Because of the possible simultaneous occupancy of three elements on the five sites of the crystal structure, the experimental determination of the site occupancies was achieved by using combined Rietveld refinement of X-ray and neutron diffraction data, whereas calculation of the site occupancies was carried out by using the density functional theory results of every ordered (i.e., 3(5) = 243) configuration appearing in the ternary system. A comparison of the experimental and calculation results showed good agreement, which suggests that the topologically close-packed phases, such as the σ phase, could be described by the Bragg-Williams approximation (i.e., ignoring the short-range-order contributions). On the other hand, the atomic distribution on different crystallographic sites of the Mo-Ni-Re σ phase was found to be governed by the atomic sizes. Ni, having the smallest atomic size, showed a preference for low-coordination-number (CN) sites, whereas Mo, being the largest in atomic size, preferred occupying high-CN sites. However, the preference of Re, having intermediate atomic size, varied depending on the composition, and a clear reversal in the preference of Re as a function of the composition was evidenced in both the calculated and experimental site-occupancy results.     

Préparation et Étude Physico-chimique de Quelques Copolyamides Aromatiques Séquencés. I. Synthèse des Copolycondensats Séquencés

A two-stage low-temperature solution polycondensation process is described for the synthesis of two kinds of block copolyamides: poly(p-biphenylene terephtalamide-co-adipamide) and poly(2,5-dimethyl trans-piperazine terephthalamide-co-adipamide). The reactivity of oligomeric end groups in various solvents is examined. This study ascertains the influence of the nature of the solvent on the extent of polycondensation. End groups seem to be more reactive in a medium in which the polyamide is soluble; this property is used for the synthesis of block copolycondensates.     

Synthesis, microwave spectrum, and dipole moment of allenylisocyanide (H2C═C═CHNC), a compound of potential astrochemical interest

An improved synthesis of a compound of potential astrochemical interest, allenylisocyanide (H(2)C═C═CHNC), is reported together with its microwave spectrum, which has been investigated in the 8-120 GHz spectral range to facilitate a potential identification in interstellar space. The spectra of the ground vibrational state and of five vibrationally excited states belonging to three different vibrational modes have been assigned for the parent species. A total of 658 transitions with a maximum value of J = 71 were assigned for the ground state and accurate values obtained for the rotational and quartic centrifugal distortion constants. The spectra of five heavy-atom ((13)C and (15)N) isotopologues were also assigned. The dipole moment was determined to be μ(a) = 11.93(16) × 10(-30) C m, μ(b) = 4.393(44) × 10(-30) C m, and μ(tot) = 12.71(16) × 10(-30) C m. The spectroscopic work has been augmented by theoretical calculations at the CCSD/cc-pVTZ and B3LYP/cc-pVTZ levels of theory. The theoretical calculations are generally in good agreement with the experimental results.     

Combining planar and central chirality in ferrocene thiophosphine-sulfoxides

Novel chiral ferrocenylthiophosphine–sulfoxide and phosphine–sulfoxide derivatives possessing planar chirality for the ferrocene moiety and central chirality at the sulfur atom have been synthesized. These ligands can be obtained as pure diastereoisomers in both racemic and enantiomerically pure forms. Complete characterization by XRD analysis has allowed the assignment of the absolute configuration in each case. Preliminary coordination studies of the phosphine–sulfoxide ligands on platinum are also reported. These show chelating complexation by the phosphorous and sulfur atoms.     

Properties of block and graft copolymers of polybutadiene with small complexed poly(4-vinylpyridine) segments

Various diblocks, triblocks and a graft copolymer of butadiene with 4-vinylpyridine short blocks have been prepared. They were complexed with ZnCl₂ to give ionomer-like materials. For all copolymers, the T_g of the elastomeric block (?84°C to ?91°C) was unchanged by complexation. For all diblocks and triblocks with short blocks (DP _n ～ 3) the storage modulus was only slightly increased by comparison with uncomplexed materials. For the graft copolymer even with short blocks the material is less sensitive to temperature after complexation. For triblocks, when the DP _n of the vinylpyridine blocks was high enough (15 units), complexes were associated in multiplets of large size and the elastomeric properties were retained up to 200°C.     

Study of metal complexes of a tripodal hydroxypyridinone ligand by electrospray tandem mass spectrometry

The tripodal ligand N,N,N-tris[(1,hydroxy-2-pyridinon-6-yl)amide]propylamine was synthesized. It is composed of an anchor (nitrogen atom), a functional group (hydroxamate), and also a spacer of variable length defined by the number of methylene groups linking the anchor and the functional group. The characterization of this ligand in the presence of several divalent metal cations (Fe(II), Mn(II), Co(II) and Cu(II)), performed by electrospray ionization mass spectrometry (ESI-MS and ESI-MS/MS), allowed elucidation of oxidation states and also of different fragmentation patterns. The importance of the spacer length was studied in the case of the iron binary complex by comparing this ligand with another with a shorter spacer. In this way the stabilizing conditions, in which hydrogen bonds are implicated, were clarified.     

Analysis of betamethasone, dexamethasone and related compounds by liquid chromatography/electrospray mass spectrometry

A reversed-phase high-performance liquid chromatography/electrospray ionisation mass spectrometry (HPLC/ESI-MS) method has been developed to conclusively differentiate the epimers betamethasone and dexamethasone and various esterification products (betamethasone and dexamethasone 21-acetate, betamethasone and dexamethasone 21-phosphate, betamethasone 17-valerate, betamethasone 21-valerate and betamethasone 17,21-dipropionate) in counterfeit drugs. Good separation with baseline resolution of all epimers or isomers was obtained on a Zorbax Eclipse XDB or Luna C8 column, using a step gradient with mobile phases of 0.05 M ammonium acetate and acetonitrile. Betamethasones can also be distinguished by the relative abundance of their m/z 279 ion in the positive electrospray tandem mass spectra. The LC/MS or LC/MS/MS method developed was successfully applied to the analysis of drug product samples, i.e. creams and tablets.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

From calcium interaction to calcium electrochemical detection by [(C5H5)Fe(C5H4COCH=CHC6H4NEt2)] and its two novel structurally characterized derivatives

[(C(5)H(5))Fe(C(5)H(4)COCH=CHC(6)H(4)NEt(2))] (1) has been electrochemically evaluated toward different cations in solution. Calcium sensing by this compound and its two new derivatives [(C(5)H(5))Fe(C(5)H(4)CO(CH=CH)(2)C(6)H(4)NMe(2))] (2) and [(C(5)H(5))Fe(C(5)H(4)CH=CHCOCH=CHC(6)H(4)NEt(2))] (3) that exhibit a conjugated link between the ferrocene unit and the nitrogen atom has been thoroughly examined. Compounds 2 and 3 have been structurally characterized by single-crystal X-ray diffraction studies. The three related protonated species [1H][BF(4)] (4), [2H][BF(4)] (5), and [3H][BF(4)] (6) have been isolated in a good yield. NMR experiments clearly established that calcium interaction occurs in the vicinity of the carbonyl group, and mass spectrometry studies confirmed that this interaction, which involves several ligand-Ca(2+) adducts, is complex. A combination of electrochemical and NMR experiments highlighted an original salt influence on the electrochemical calcium sensing result.