On the survival of peptide cations after electron capture: Role of internal hydrogen bonding and microsolvation

Electron capture by both bare and microsolvated small peptide dications was investigated by colliding these ions with sodium vapor in an accelerator mass spectrometer to provide insight into processes that occur on the microsecond time frame. Survival of the intact peptide monocation after electron capture depends strongly on molecular size. For dipeptides, no intact reduced species were observed; the predominant ions correspond to loss of hydrogen and ammonia. In contrast, the intact reduced species was observed for larger peptides. Calculated structures indicate that the diprotonated dipeptide ions form largely extended structures with low probability of internal ionic hydrogen bonding (i.e., charge solvation) whereas internal ionic H-bonding occurs extensively for larger peptide dications. Solvation of the peptide ions with between one to seven methanol molecules reduces the total extent of H loss even for dipeptides where intact reduced species can survive more than a microsecond after electron capture. The yield of ions corresponding to cleavage of NCalpha bonds (c+ and z+* ions) does not depend strongly on peptide size but decreases with the extent of microsolvation for the dipeptide dications. H-bonding appears to play an important role for the survival of the intact reduced ions but less so for the formation of c+ and z+* ions. Our results indicate that electron capture predominantly occurs at the ammonium groups (at least 70 to 80%), and provides important new insights into the electron capture dissociation process.     

New ion exchange membrane derived from sulfochlorated polyether sulfone for electrodialysis desalination of brackish water

The purpose of this work is to study the desalination of brackish water using a new ion exchange membrane, made from sulfochlorated polyethersulfone (Cl‐PES), and crosslinked using aminated polyethersulfone (NH2‐PES) as a crosslinking reagent. This membrane, named ClNH2 membrane, has been obtained by reaction between Cl‐PES with 1.3 SO₂Cl groups per monomer unit and 0.2 equivalent amount of NH2‐PES. ClNH2 membrane has been characterized in terms of contact angle, transport number, intrinsic conductivity, and water uptake (as a function of temperature). Electrodialysis performances of the newly synthetized membranes have been measured using an electrodialysis cell at a laboratory scale and compared to commercial membranes. All the experiments have been performed using synthetic brackish water solutions prepared from sodium chloride salts with different concentrations (varying from 0.5 to 5.0 g/L). The concentration of different water samples obtained has been found to be below the amount recommended by the World Health Organization (WHO) for drinking water.     

Soft-landing of peptides onto self-assembled monolayer surfaces

Mass-selected peptide ions produced by electrospray ionization were deposited as ions by soft-landing (SL) onto fluorinated and hydrogenated self-assembled monolayer (FSAM and HSAM) surfaces using a Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR MS) specially designed for studying collisions of large ions with surfaces. Analysis of modified surfaces was performed in situ by combining 2 keV Cs(+) secondary ion mass spectrometry with FT-ICR detection of the sputtered ions (FT-ICR-SIMS). Similar SIMS spectra obtained following SL at different collision energies indicate that peptide fragmentation occurred in the analysis step (SIMS) rather than during ion deposition. The effect of the surface on SL was studied by comparing the efficiencies of SL on gold, FSAM, HSAM, and COOH-terminated SAM surfaces. It was found that FSAM surfaces are more efficient in retaining ions than their HSAM analogues, consistent with their larger polarizability. The efficiency of soft-landing of different peptides on the FSAM surface increases with the charge state of the ion, also consistent with an ion-polarizable molecule model for the initial stage of soft-landing on SAM surfaces. The gradual decrease of peptide ion deposition efficiency with an increase in collision energy found experimentally was quantitatively rationalized using the hard-cube model.     

Electrochemical insights into the mechanisms of proton reduction by [Fe2(CO)6{micro-SCH2N(R)CH2S}] complexes related to the [2Fe](H) subsite of [FeFe]hydrogenase

Electrochemical investigations on a structural analogue of the [2Fe](H) subsite of [FeFe]H(2)ases, namely, [Fe(2)(CO)(6){micro-SCH(2)N(CH(2)CH(2)- OCH(3))CH(2)S}] (1), were conducted in MeCN/NBu(4)PF(6) in the presence of HBF(4)/Et(2)O or HOTs. Two different catalytic proton reduction processes operate, depending on the strength and the concentration of the acid used. The first process, which takes place around -1.2 V for both HBF(4)/Et(2)O and HOTs, is limited by the slow release of H(2) from the product of the {2 H(+)/2 e} pathway, 1-2H. The second catalytic process, which occurs at higher acid concentrations, takes place at different potentials depending on the acid present. We propose that this second mechanism is initiated by protonation of 1-2H when HBF(4)/Et(2)O is used, whereas the reduction of 1-2H is the initial step in the presence of the weaker acid HOTs. The potential of the second process, which occurs around -1.4 V (reduction potential of 1-3H(+)) or around -1.6 V (the reduction potential of 1-2H) is thus dependent on the strength of the available proton source.     

Synthesis of 1,3-diamino-7,8,9,10-tetrahydropyrido[3,2-f]-quinazolines. Inhibitors of Candida albicans dihydrofolate reductase as potential antifungal agents

A series of novel 1,3-diamino-7,8,9,10-tetrahydropyrido[3,2-f]quinazolines were synthesized starting from 6-amino-5-cyanoquinoline (4). These compounds inhibited Candida albicans dihydrofolate reductase with K_i values of ≤0.60 aM. One analogue exhibited moderate in vivo efficacy in a C. albicans-infected mouse model.     

Use of 1,10-phenanthroline in diiron dithiolate derivatives related to the [Fe-Fe] hydrogenase active site

Treatment of [Fe(2)(micro-pdt)(CO)(6)] (pdt = S(CH(2))(3)S) with 1,10-phenanthroline (phen) in refluxing toluene affords the asymmetric complex [Fe(2)(micro-pdt)(CO)(4)(phen)] (1); the protonation of with HBF(4).OEt(2) in CD(2)Cl(2) at 203 K has been monitored by (1)H NMR.     

Simulation of Electrical and Thermal Behavior of Poly(propylene) / Carbon Filler Conductive Polymer Composites

PP-carbon CPC show interesting thermo-electrical properties, smooth resistivity increase with temperature up to 150°C and consequently high power dissipation on a wide temperature range. The addition of short carbon fibers to PP already formulated with carbon black increases sharply the electrical conductivity of the CPC but does not have much influence on thermal conductivity as it could have been expected from the favorable aspect ratio of the fibers. The simulations of the thermo-electrical behavior of the CPC under tension put into evidence a temperature gradient at high heat flux due to the low thermal conductivity, which may damage the material itself.     

Extreme stability of an unsolvated alpha-helix

High-temperature ion mobility measurements have been performed for alpha-helical Ac-A15K+H+ and globular Ac-KA15+H+ peptides. The alpha-helical and globular conformations do not melt into random coils as the temperature is raised. Instead, both conformations survive to the point where the peptide signals vanishes due to fragmentation. This occurs at 600 K for the globular Ac-KA15+H+ peptide and at 725 K for the alpha-helical Ac-A15K+H+. For the helical Ac-A15K+H+ peptide it appears that fragmentation is triggered by disruption of the helical conformation.     

Coexistence of Two Thermally Induced Intramolecular Electron Transfer Processes in a Series of Metal Complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)2] (M=Co,Fe, and Ni) bearing Non‐Innocent Catechol‐Based Ligands: A Combined Experimental and Theoretical Study

The different thermally induced intermolecular electron transfer (IET) processes that can take place in the series of complexes [M(Cat‐N‐BQ)(Cat‐N‐SQ)]/[M(Cat‐N‐BQ)₂], for which M=Co ( 2 ), Fe ( 3 ) and Ni( 4 ), and Cat‐N‐BQ and Cat‐N‐SQ denote the mononegative (Cat‐N‐BQ^?) or dinegative (Cat‐N‐SQ^2?) radical forms of the tridentate Schiff‐base ligand 3,5‐di‐tert‐butyl‐1,2‐quinone‐1‐(2‐hydroxy‐3,5‐di‐tert‐butylphenyl)imine, have been studied by variable‐temperature UV/Vis and NMR spectroscopies. Depending on the metal ion, rather different behaviors are observed. Complex 2 has been found to be one of the few examples so far reported to exhibit the coexistence of two thermally induced electron transfer processes, ligand‐to‐metal (IET^LM) and ligand‐to‐ligand (IET^LL). IET^LL was only found to take place in complex 3 , and no IET was observed for complex 4 . Such experimental studies have been combined with ab initio wavefunction‐based CASSCF/CASPT2 calculations. Such a strategy allows one to solicit selectively the speculated orbitals and to access the ground states and excited‐spin states, as well as charge‐transfer states giving additional information on the different IET processes.